Avaya Communication Manager Administrator's Manual page 107

Instructions
Set up the signaling group for remote office:
1
Type add signaling-group and the number of the group you want to add.
The Signaling Group
add signaling-group 6
Group Number
Trunk Group for Channel Selection:
Near-end Node Name:
Near-end Listen Port:
2
In the
Group Type
3
In the
Remote Office
4
In the
Trunk Group for Channel Selection
remote office.
5
In the
Near-end Node Name
the R300.
6
In the
Far-end Node Name
R300.
7
In the
Near-end Listen Port
8
In the
Far-end Listen Port
Office Communicator for more details.
9
In the RRQ
10
Tab to the
11
Press
ENTER
Administrator's Guide for Avaya Communication Manager
November 2003
screen appears.
6 Group Type:
Remote Office?
Supplementary Service Protocol: _
clan
5001
LRQ Required? _
RRQ Required? y
field, type H.323.
field, type y.
field, identify the node name assigned to the CLAN that supports
field, identify the node name assigned to the CLAN that supports the
field, type a port number in the 5000-9999 range.
field, type 1720. See Getting Started with the Avaya R300 Remote
field, type y.
Direct IP-IP Audio Connection
to save your changes.
SIGNALING GROUP
H.323
y Max Number of NCA TSC: ___
Max number of CA TSC:
Trunk Group for NCA TSC:
6
Far-end Node Name: remote office 6
Far-end Listen Port:5055
Calls Share IP Signaling Connection?
Bypass If IP Threshold Exceeded?
Interworking Message: ________
field, type the number of the trunk you set up for the
field on another page of this screen and type y.
Managing Phones
Setting up Remote Office
Page 1 of 5
___
___
_
_
107