Setting The System Date And Time; Before You Start - Avaya Communication Manager Administrator's Manual

3
Complete the
a
Type Sunday in the
b
Type October in the
c
Type 25 in the
d
Type 2:00 in the
This information specifies the day, month, date, and time you want the system clock to
transition back to standard time.
4
Press ENTER to save your changes.
Displaying daylight savings time rules
To display daylight savings time rules:
1
Type display daylight-savings-rules and press
The Daylight Savings Rule screen displays. Verify the information you entered is correct.

Setting the system date and time

Update the date and time for events such as a leap year, the change to or from daylight savings time, or a
system restart after a power failure. The correct date and time assure that CDR records are correct. CDR
does not work until the date and time have been entered.
NOTE:
Changing the date and time may modify CDR data by 9 hours and 59 minutes. Therefore,
you should change the date and time after normal business hours. After you change the
date and time, review the time settings for any adjunct (other than AUDIX) linked to your
system that uses the system time.

Before you start

Before you can set the date and time, you need to know whether it is currently daylight savings or
standard time and know which daylight savings rule number you want to use. Daylight savings rule
numbers are located on the
Administrator's Guide for Avaya Communication Manager
November 2003
fields for rule 1.
Stop
Change Day
field.
Month
field.
Date
field.
Time
Daylight Savings Rules
Establishing Daylight Savings Rules
field.
.
ENTER
screen.
System Basics
39