Avaya Communication Manager Administrator's Manual page 108

Managing Phones
Setting up Remote Office
Setting up Remote Office on network
regions
Now we will set up a network region and show the connections between regions.
Instructions
Set up network region 1:
1
Type add ip-network-region 1 and press
The IP Network Region
change ip-network-region 1
change ip-network-region 1
Region: 1
Region: 1
Location:
Location:
Name: Name:
AUDIO PARAMETERS AUDIO PARAMETERS
Codec Set: 1
Codec Set: 1
UDP Port Min: 2048
UDP Port Min: 2048
UDP Port Max: 3049
UDP Port Max: 3049
DIFFSERV/TOS PARAMETERS
DIFFSERV/TOS PARAMETERS
Call Control PHB Value: 34 Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
H.323 Link Bounce Recovery? y
Idle Traffice Interval (sec): 20 Idle Traffice Interval (sec): 20
Keep-Alive Interval (sec): 6 Keep-Alive Interval (sec): 6
2
In the
Name
3
In the Codec Set
4
In the UDP Port Range
transport.
5
In the Intra-region IP-IP Direct Audio
6
In the Inter-region IP-IP Direct Audio
7
Move to page 3 to set up connections between regions and assign codecs for inter-region
connections.
NOTE:
Page 2 of the
region, and pages 4 through 19 are duplicates of page 3, providing the ability to administer
up to 250 locations. For details, see the Screen Reference section,
108
screen appears.
IP NETWORK REGION
IP NETWORK REGION
Home Domain:
Home Domain:
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no
Audio PHB Value: 46
Audio 802.1p Priority: 6
Keep-Alive Count: 5 Keep-Alive Count: 5
field, describe the region you are setting up.
field, type the codec set you want to use in this region.
field, type the range of the UDP port number to be used for audio
IP Network Region
Administrator's Guide for Avaya Communication Manager
.
ENTER
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no
IP Audio Hairpinning? y
IP Audio Hairpinning? y
RTCP Reporting Enabled? y
RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Use Default Server Parameters? y
Server IP Address: Server IP Address:
Server Port: 5005 Server Port: 5005
RTCP Report Period(secs): 5
RTCP Report Period(secs): 5
AUDIO RESOURCE RESERVATION PARAMETERS
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Refresh Rate(secs): 15
RSVP Refresh Rate(secs): 15
Retry upon RSVP Failure Enabled? y Retry upon RSVP Failure Enabled? y
RSVP Profile: guaranteed-service RSVP Profile: guaranteed-service
RSVP unreserved (BBE) PHB Value: 40 RSVP unreserved (BBE) PHB Value: 40
field, type y.
field, type y.
screen shows a list of LSP servers for the network
Page 1 of 19
Page 1 of 19
. . . . . .
RSVP Enabled? y
RSVP Enabled? y
IP Network Region.
November 2003