Avaya Communication Manager Administrator's Manual page 32

System Basics
Accessing the S8700 Media Server
Instructions
1
Start up ASA by double-clicking the ASA icon.
2
In the
Target System
If you have not set up the desired system, click the New VOICE SYSTEM icon (on the left of the
toolbar row). Complete the Add Voice System wizard to build the system record. When
completed, the record will be available in the
3
Click Start GEDI.
You now are connected to the desired system.
Accessing the S8700 Media Server Remotely
over the network
You can access the S8700 Media Server from any computer connected through the LAN. To access either
server, use the IP address assigned to the server you want to access. You can also use the active server
address to connect automatically to the server that is active. Once connected, you can administer the
media server using three tools:
•
Media server web interface for server-specific administration and call processing features
•
Avaya Site Administration for Communication Manager (Only available on the active
Communication Manager server)
•
A command line interface via a Telnet window for Linux shell commands.
Installing Avaya Site Administration
If you do not have ASA on your computer, make sure your PC or laptop first meets the minimum
requirements.
Table 2: Minimum requirements to run ASA 1 of 2
Operating systems
MS Windows 95
MS Windows 98
MS Windows NT 4.0
MS Windows 2000
Graphics adapter
Floppy disk drive
CD-ROM
Available hard disk space
32
field, use the pull-down menu to select the desired system.
Target System
Processor/RAM
486SL/66/16 MB
Pentium/32 MB
Pentium/64 MB
Pentium-class 300 MHz/64 MB
SVGA with minimum screen resolution of 800 x
600
3-1/2 in. 1.44-MB floppy disk drive
CD-ROM drive (required to install ASA from CD)
A minimum of 100-MB free hard disk space is
required. The requirement for disk space depends on
the size and number of configuration data sets.
Administrator's Guide for Avaya Communication Manager
pull-down list.
1 of 2
November 2003