Fig 2-25 Tray 3 Retard Assembly; Rrp 2-20Tray 3 Retard Assembly (Pl 12.6) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 2-20Tray 3 Retard Assembly (PL 12.6)

Spring

Fig 2-25 Tray 3 Retard Assembly

Removal
1.
Remove Tray 3 from the High Capacity Feeder.
2.
Remove the Rear Cover (RRP 2-2).
3. Remove the High Capacity Feeder Left Door C (RRP 2-3)
4. Open the Left Door C Assembly.
5.
Remove the Spring that is located on the left side of the Inner Chute (Figure 1).
6.
Remove the two screws securing the Inner Chute to the High Capacity Feeder
frame, and remove the Inner Chute.
7.
Carefully pull the plastic Upper Take Away Chute off of the Bearings, and
remove the Chute.
8.
Remove the screw securing the Feed In Chute (PL12.6.16) to the High
Capacity Feeder frame.
9.
Lift the Retard Shaft up and out of the way while you slide the Feed In Chute to
the front of the High Capacity Feeder.
Figure 1
Figure 2
Volume 2 / High Capacity Feeder - RRPs
Upper Take Away Chute
Inner Chute
S4525-214
2-439