Fig 1-48 Tray 1 Retard Assembly - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 1-15 Tray 1 Retard Assembly (PL 3.3)

Fig 1-48 Tray 1 Retard Assembly

Removal
1.
Remove the Tray 1 Take-Away Roller Assembly (RRP 1-12).
2.
Remove the machine screw securing the Feed In Chute (19) to the Assembly
and slide the Chute to the front of the Assembly to remove it.
3.
Remove the plastic Feed Chute (18) from the Take-Away Roller.
4.
Unhook the spring from the Retard Support.
5.
Remove Tray 1 Support Assembly Spring (21) (RRP 1-15).
6.
Remove the screw securing the Gear Stopper (12) to the Assembly, and move
the Stopper out of the way.
7. Remove the plastic bearing securing the Take-Away Roller Shaft to the front of
the Retard Frame, and remove the Retard Assembly and Take-Away Roller.
8.
Remove the E-rings and Gears (PL 3.3.10-12) attached to the rear of the
Take-Away Roller Shaft.
9.
Remove the Center Bearing on the Take-Away Roller Shaft, and slide the
Roller out of the Retard Support.
1-202 DocuPrint N4525 Network Laser Printer - Service Guide
1 2 3
S4525-88