REP 10.17 Fuser Release Drive Assembly
Parts List on
PL 4.10 Item 3
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
10.1.
2.
Remove the Waste Toner Cartridge.
3.
Remove the Left Cover,
REP
28.3.
4.
Disconnect P/J23 from the Fuser Release Drive Assembly,
5.
Remove 3 screws (Gold, metal) that secure the Release Drive Assembly to the chassis,
Figure
1.
Figure 1 Remove the Fuser Release Drive Assembly
4 Repairs and Adjustments
REP 10.17, REP 10.18
WARNING
REP 10.18 Duplex Unit Detect Sensor
Parts List on
PL 10.25 Item 25
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
2.
Remove the Waste Toner Cartridge.
3.
Remove the Left Cover,
REP
4.
Release 3 hooks that secure the sensor to the left side tray guide.
5.
Disconnect P/J25 to remove the sensor,
Figure 1 Remove the Duplex Unit Detect Sensor
04/2016
4-116
WARNING
10.1.
28.3.
Figure
1.
Phaser 4600/4620/4622 Printer Service Manual
Revised