Rep 10.17 Fuser Release Drive Assembly - Xerox Phaser 4620 Service Manual

Figure 2 Remove the Pressure Roller and Bearings
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual

REP 10.17 Fuser Release Drive Assembly

Parts List on PL 4.10 Item 3
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP
4. Disconnect P/J23 from the Fuser Release Drive Assembly,
5. Remove 3 screws (Gold, metal) that secure the Release Drive Assembly to the chassis,
Figure 1.
Figure 1 Remove the Fuser Release Drive Assembly
5/2011
4-113
WARNING
10.1.
28.3.
REP 10.16, REP 10.17
Repairs