Table of Contents
Advertisement
Task
Configure a
management route to
the network from
which you are
accessing the system.
Configure a Username and Password
Configure a system username and password to access the system remotely.
Task
Configure a username
and password to
access the system
remotely.
Configure the Enable Password
The EXEC Privilege mode is unrestricted by default. Configure a password as a
basic security measure. There are two types of enable passwords:
•
enable password stores the password in the running/startup configuration
using a DES encryption method.
•
enable secret is stored in the running/startup configuration in using a
stronger, MD5 encryption method.
Dell Force10 recommends using the enable secret password.
Task
Create a password to
access EXEC
Privilege mode.
22
Installing the Software
Command Syntax
management route ip-address/mask
gateway
Command Syntax
username username password
[encryption-type]
Command Syntax
enable [password | secret] [level level]
[encryption-type] password
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION
Hide quick links:
Advertisement
Table of Contents
