Show Debugging Gvrp - Allied Telesis x510-28GTX Command Reference Manual

GVRP C
OMMANDS

SHOW DEBUGGING GVRP

show debugging gvrp
Overview Use this command to display the GVRP debugging option set.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show debugging gvrp
Mode User Exec and Privileged Exec
Example Enter the following commands to display GVRP debugging output on the console:
awplus#
awplus(config)#
awplus(config)#
awplus#
Output See sample output from the show debugging gvrp command after entering
debug gvrp all:
Related debug gvrp
Commands
C613-50170-01 Rev B
configure terminal
debug gvrp all
exit
show debugging gvrp
GVRP debugging status:
GVRP Event debugging is on
GVRP CLI debugging is on
GVRP Timer debugging is on
GVRP Packet debugging is on
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
761