Auth-Web-Server Ipaddress - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch
Hide thumbs Also See for AT-IX5-28GPX:
Table of Contents

Advertisement

A
C
UTHENTICATION
OMMANDS
-
-
AUTH
WEB
SERVER IPADDRESS

auth-web-server ipaddress

Overview
This command sets the IP address for the Web-Authentication server.
Use the no variant of this command to delete the IP address for the
Web-Authentication server.
Syntax
auth-web-server ipaddress <ip-address>
no auth-web-server ipaddress
Default
The Web-Authentication server address on the system is not set by default.
Mode
Global Configuration
Examples
To set the IP address 10.0.0.1 to the Web-Authentication server, use the
following commands:
awplus#
awplus(config)#
To delete the IP address from the Web-Authentication server, use the following
commands:
awplus#
awplus(config)#
Validation
show auth-web
Commands
show auth-web-server
show running-config
1086
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
Description
Web-Authentication server dotted decimal IP address in
<ip-address>
A.B.C.D format.
configure terminal
auth-web-server ipaddress 10.0.0.1
configure terminal
no auth-web-server ipaddress
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A

Advertisement

Table of Contents
loading

Table of Contents