Table of Contents
Advertisement
S
C
M
YSTEM
ONFIGURATION AND
SHOW DEBUGGING
show debugging
Overview
This command displays information for all debugging options.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show debugging
Default
This command runs all the show debugging commands in alphabetical order.
Mode
User Exec and Privileged Exec
Usage
This command displays all debugging information, similar to the way the
tech-support
authorized service personnel only.
Example
To display all debugging information, use the command:
awplus#
Output
Figure 6-5:
C613-50103-01 REV A
C
ONITORING
OMMANDS
command displays all show output for use by Allied Telesis
show debugging
Example output from the show debugging command
awplus#show debugging
AAA debugging status:
Authentication debugging is off
Accounting debugging is off
% DHCP Snooping service is disabled
802.1X debugging status:
EPSR debugging status:
EPSR Info debugging is off
EPSR Message debugging is off
EPSR Packet debugging is off
EPSR State debugging is off
IGMP Debugging status:
IGMP Decoder debugging is off
IGMP Encoder debugging is off
...
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
show
247
Advertisement
Table of Contents
