Auth-Web-Server Intercept-Port - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER INTERCEPT PORT

auth-web-server intercept-port

Overview This command specifies any additional TCP port numbers that the
Web-Authentication server is to intercept.
Use the no variant of this command to stop intercepting the TCP port numbers.
Syntax
auth-web-server intercept-port <1-65535>
no auth-web-server intercept-port <1-65535>
Default No additional TCP port numbers are intercepted by default.
Mode Global Configuration
Usage If this command is not specified, AlliedWare Plus Web-Authentication intercepts
the supplicant's initial TCP port 80 connection to a web page and sends it the Web-
Authentication Login page. However, if the supplicant is configured to use a web
proxy, then it will usually be using TCP port 8080 (or another user configured port
number). In this case Web-Authentication cannot intercept the connection.
To overcome this limitation you can now use this command to tell the switch
which additional port it should intercept, and then send the Web-Authentication
Login page to the supplicant.
When you use this command in conjunction with a proxy server configured in the
web browser, you must add the proxy server's network as a 'No Proxy' network.
You can specify 'No Proxy' networks in the proxy settings in your web browser. For
more information, see the "Web Auth Proxy" section in the
Technical Tips and Tricks.
Example To additionally intercept port number 3128, use the following commands:
awplus#
awplus(config)#
Related show auth-web-server
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
TCP port number.
<1-65535>
configure terminal
auth-web-server intercept-port 3128
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Alliedware Plus
1085