Auth-Web-Server Blocking-Mode - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER BLOCKING MODE

auth-web-server blocking-mode

Overview Use this command to enable blocking mode for the Web-Authentication server.
The blocking mode displays an authentication success or failure screen
immediately from the response result from a RADIUS server.
Use the no variant of this command to disable blocking mode for the
Web-Authentication server.
Syntax
auth-web-server blocking-mode
no auth-web-server blocking-mode
Default By default, blocking mode is disabled for the Web-Authentication server.
Mode Global Configuration
Example To enable blocking mode for the Web-Authentication server, use the following
commands:
awplus#
awplus(config)#
To disable blocking mode for the Web-Authentication server, use the following
commands:
awplus#
awplus(config)#
Validation show running-config
Commands
Related show auth-web-server
Commands
auth-web-server mode (deleted)
auth-web-server redirect-delay-time
1078 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
blocking-mode
no
configure terminal
auth-web-server blocking-mode
configure terminal
no auth-web-server blocking-mode
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Use blocking authentication server process.
Disable blocking mode.
C613-50057-01 REV A