Table of Contents
Advertisement
GVRP C
OMMANDS
SHOW DEBUGGING GVRP
show debugging gvrp
Overview
Use this command to see what debugging is turned on for GVRP.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show debugging gvrp
Mode
User Exec and Privileged Exec
Example
Enter the following commands to display GVRP debugging output on the console:
awplus#
awplus(config)#
awplus(config)#
awplus#
Output
See sample output from the show debugging gvrp command after entering
debug gvrp all:
Related
debug gvrp
commands
C613-50644-01 Rev B
configure terminal
debug gvrp all
exit
show debugging gvrp
GVRP debugging status:
GVRP Event debugging is on
GVRP CLI debugging is on
GVRP Timer debugging is on
GVRP Packet debugging is on
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
803
Advertisement
Table of Contents
