A
C
UTHENTICATION
OMMANDS
-
-
AUTH
WEB
SERVER PAGE SUCCESS
auth-web-server page success-message
Overview
This command sets the success message on the web-authentication page.
Use the no variant of this command to remove the success message.
Syntax
auth-web-server page success-message text <success-message>
no auth-web-server page success-message
Default
No success message is set by default.
Mode
Global Configuration
Examples
To set the success message on the web-authentication page, use the commands:
awplus#
awplus(config)#
success message
To unset the success message on the web-authentication page, use the
commands:
awplus#
awplus(config)#
Validation
show auth-web-server page
Commands
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
-
MESSAGE
Parameter
<success-message>
configure terminal
auth-web-server page success-message text Your
configure terminal
no auth-web-server page success-message
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Text string of the success message
1091