Gvrp Commands; Introduction - Allied Telesis AT-x510-28GTX Command Reference Manual

19

Introduction

Overview With GVRP enabled the switch can exchange VLAN configuration information with
other GVRP enabled switches. VLANs can be dynamically created and managed
through trunk ports.
•
•
•
This chapter provides an alphabetical reference for commands used to configure
GVRP. For information about GVRP, including configuration, see the
Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
C613-50102-01 REV C

GVRP Commands

There is a limit of 400 VLANs supported by the AlliedWare Plus GVRP
implementation. VLANs may be numbered 1-4094, but a limit of 400 of these
VLANs are supported.
MSTP is not supported by the AlliedWare Plus GVRP implementation. GVRP
and MSTP are mutually exclusive. STP and RSTP are supported by GVRP.
VCStack is not supported by the current AlliedWare Plus GVRP
implementation.
"clear gvrp statistics" on page 672
"debug gvrp" on page 673
"gvrp (interface)" on page 675
"gvrp dynamic-vlan-creation" on page 676
"gvrp enable (global)" on page 677
"gvrp registration" on page 678
"gvrp timer" on page 679
"show debugging gvrp" on page 681
"show gvrp configuration" on page 682
"show gvrp machine" on page 683
"show gvrp statistics" on page 684
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Guide.
GVRP Feature
670