Service Power-Inline - Allied Telesis x510-28GTX Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
SERVICE POWER INLINE

service power-inline

Overview This command enables Power over Ethernet (PoE) globally on the switch, for all
PoE ports.
service power-inline
Syntax
no service power-inline
Default PoE functionality is enabled by default
Mode Global Configuration
Usage In a stack, issuing this command enables PoE globally for all PoE ports.
In a stack configuration, only stack members containing PoE hardware will have
PoE enabled by default in software.
Examples To disable PoE, use the following commands:
awplus#
awplus(config)#
To re-enable PoE, if PoE has been disabled, use the following commands:
awplus#
awplus(config)#
Related show power-inline
Commands
show running-config
C613-50170-01 Rev B
configure terminal
no service power-inline
configure terminal
service power-inline
power-inline
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
738