Service Power-Inline - Allied Telesis IE340 Series Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
SERVICE POWER INLINE

service power-inline

Overview This command enables Power over Ethernet (PoE) globally on the switch, for all
PoE ports.
service power-inline
Syntax
no service power-inline
Default PoE functionality is enabled by default
Mode Global Configuration
Examples To disable PoE, use the following commands:
awplus#
awplus(config)#
To re-enable PoE, if PoE has been disabled, use the following commands:
awplus#
awplus(config)#
Related show power-inline
commands
show running-config
Command Version 5.4.8-0.2: added to x550 series products
changes
C613-50631-01 Rev A
configure terminal
no service power-inline
configure terminal
service power-inline
power-inline
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
824