Table of Contents
Advertisement
Chapter 7: Powering On the Chassis
If there are two system power supplies, you may power on either
supply first. The illustration in Figure 109 shows the connection of an
AC power cord to connector D.
Figure 109. Connecting the AC Power Cord for the AT-SBxPWRSYS1
Power Supply
3. Use the twist tie included with the power supply to secure the cord to
an anchor on the chassis to protect it from being accidentally pulled
out, as shown in Figure 110 on page 157.
156
Download from Www.Somanuals.com. All Manuals Search And Download.
Advertisement
Table of Contents
