Show Ipv6 Dhcp Binding - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
26-13 show ipv6 dhcp
This command is used to display the DHCPv6 related setting for interfaces.
show ipv6 dhcp [interface [INTERFACE-ID]]
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the device's DHCPv6 DUID or use the show ipv6 dhcp interface
command to display the DHCPv6 related settings for interfaces. If the interface ID is not specified, all
interfaces that are enabled with the DHCPv6 function will be displayed.
Example
This example shows how to display the DHCPv6 information for interface VLAN 1, when VLAN 1 is not in
the DHCPv6 mode.
Switch# show ipv6 dhcp interface vlan1
vlan1 is not in DHCPv6 mode
Switch#
This example shows how to display the DHCPv6 client for interface VLAN 1, when VLAN 1 is DHCPv6
server enabled.
Switch# show ipv6 dhcp interface vlan1
Vlan1 is in server mode
IPv6 DHCP pool is pool1
Rapid-Commit is disabled
Switch#
26-14

show ipv6 dhcp binding

This command is used to display the IPv6 prefix binding entry.
(Optional) Specifies the VLAN interface to display the DHCPv6 related
setting.
402