Show Ip Ospf Database External - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Network Mask: /0
TOS: 0
Total Entries: 2
Switch#
71-29

show ip ospf database external

This command is used to display information about the external LSAs.
show ip ospf [vrf VRF-NAME] database external [LINK-STATE-ID | self-originate | adv-router IP-
ADDRESS]
Parameters
vrf VRF-NAME
LINK-STATE-ID
self-originate
adv-router
IP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the Autonomous System Boundary Router (ASBR)
external LSAs.
Example
This example shows how to display information about the Autonomous System Boundary Router (ASBR)
external LSAs.
Switch# show ip ospf database external
LS age: 1056
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: AS-external-LSA
Link State ID: 1.0.0.0 (External Network Number)
Advertising Router: 10.47.65.160
LS Seq Number: 80000001
Checksum: 0x17e4
Length: 36
Metric: 1
(Optional) Specifies the IPv4 OSPF VRF process.
Specifies the link state ID (as an IP address).
Specifies the self-originated link states.
Specifies to display all the LSAs of the specified router.
Specifies the advertise router IP address.
AS External Link States
828