D-Link DXS-3600 Series Reference Manual page 212

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
all
rd RD-VALUE
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the CIDR routing entry information in the BGP routing table.
Example
This example shows how to display the CIDR routing entry information the BGP routing table.
Switch# show ip bgp cidr-only
BGP table version is 13, local router ID is 10.1.1.99
Status codes:s suppressed,d damped,h history,* valid,> best,i – internal
Origin codes: i – IGP, e – EGP, ? – incomplete
Network
*> 10.10.10.0/24
*> 10.10.20.0/24
* 10.20.10.0/24
*dh 30.10.1.1/24
Switch#
Display Parameters
BGP table version
local router ID
Status codes
Origin codes
(Optional) Specifies to display all the VPNv4 routing entries.
(Optional) Specifies to display the VPNv4 routing entries that match
the specified RD.
(Optional) Specifies to display the VPNv4 routing entries associated
with the VRF.
Next Hop Metric LocPrf
172.16.10.1 0
172.16.10.1 0
172.16.10.1 0
172.3.3.2 100
The version number of the table. This number is incremented
whenever the table changes.
The IP address of the router.
The status of the path. It can be one of the following values:
s - The path is suppressed.
d - The path is dampened.
h - The entry is a history path.
* - The path is valid.
> - The entry is the best path to that network.
i - The path was learned via an iBGP session.
The origin of the path. It can be one of the following values:
i - Path originated from IGP.
e - Path originated from EGP.
212
Weight Path
300 10 i
300 10 i
0 300 10 i
50 200 20 i