D-Link DXS-3600 Series Reference Manual page 26

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
2-14 show cpu utilization
This command is used to display the CPU utilization information.
show cpu utilization
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the system's CPU utilization information in 5 second, 1 minute, and 5 minute
intervals.
Example
This example shows how to display the information about CPU utilization.
Switch# show cpu utilization
CPU Utilization
Five seconds -
Switch#
2-15 show version
This command is used to display the switch's software version information.
show version
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
8 % One minute -
26
8 % Five minutes - 8 %