D-Link DXS-3600 Series Reference Manual page 13

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Left Arrow
Right Arrow
CTRL+R
Return
Space
ESC
Display Result Output Modifiers
Results displayed by show commands can be filtered using the following parameters:
•
begin FILTER-STRING - This parameter is used to start the display with the first line that
matches the filter string.
•
include FILTER-STRING - This parameter is used to display all the lines that match the filter
string.
•
exclude FILTER-STRING - This parameter is used to exclude the lines that match the filter string
from the display.
The example below shows how to use the begin FILTER-STRING parameter in a show command.
Switch#show running-config | begin # DEVICE
# DEVICE
configure terminal
end
# AAA
configure terminal
# AAA START
no aaa new-model
# AAA END
end
Switch#
The example below shows how to use the include FILTER-STRING parameter in a show command.
Switch#show running-config | include # DEVICE
# DEVICE
Switch#
The example below shows how to use the exclude FILTER-STRING parameter in a show command.
Switch#show running-config | exclude # DEVICE
Building configuration...
Current configuration : 56102 bytes
Moves the cursor to the left.
Moves the cursor to the right.
Toggles the insert text function on and off. When on, text can be
inserted in the line and the remainder of the text will be shifted to the
right. When off, text can be inserted in the line and old text will
automatically be replaced with the new text.
Scrolls down to display the next line or used to issue a command.
Scrolls down to display the next page.
Escapes from the displaying page.
13