D-Link DXS-3600 Series Reference Manual page 946

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Uptime: 0DT16H52M39S, expires: 0DT00H02M50S
Group(s): 225.0.0.0/8
RP: 1.1.1.10
Info source: static
Switch#
Display Parameters
RP
Info source
Via bootstrap
Priority
Uptime
Expires
79-20 show ip pim rp-hash
This command is used to display the rendezvous point (RP) to be chosen based on the group selected.
show ip pim rp-hash GROUP-ADDRESS
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the RP selected for the specified group.
Example
This example shows how to display the RP with the group address 238.10.10.10.
Switch# show ip pim rp-hash 238.10.10.10
RP: 10.20.30.1
Info source: 10.20.30.1, via bootstrap
Uptime: 0DT01H42M15S, expires: 0DT00H02M16S
The address of the RP for the group specified.
Indicates from which system the router learned this RP information.
The RP mapping information is learned from the BSR.
The RP priority.
The length of time (in day, hours, minutes, and seconds) that the
router has known about this RP.
The time (in day, hours, minutes, and seconds) after which the
information about this RP expires. If the router does not receive any
refresh messages in this time, it will discard information about this RP.
Specifies the group address to display the selected RP for the group.
946