D-Link DXS-3600 Series Reference Manual page 395

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
domain-name DOMAIN-NAME
no domain-name DOMAIN-NAME
Parameters
DOMAIN-NAME
Default
None.
Command Mode
DHCPv6 Pool Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to configure the domain name to be assigned to the requesting DHCPv6 client. Only
one domain name can be specified.
Example
This example shows how to configure the domain name in a DHCPv6 server pool named "pool1".
Switch# configure terminal
Switch(config)# ipv6 dhcp pool pool1
Switch(config-dhcp)# domain-name v6domain
Switch(config-dhcp)#
26-5 dns-server
This command is used to configure the DNS IPv6 server list to be assigned to the requesting IPv6 client.
Use the no form of this command to remove a DNS server from the server list.
dns-server IPV6-ADDRESS
no dns-server IPV6-ADDRESS
Parameters
IPV6-ADDRESS
Default
None.
Command Mode
DHCPv6 Pool Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Specifies the domain name.
Specifies the IPv6 address of the DNS server.
395