Page 2
Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written permission of D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Intended Readers The DXS-3610 Series 100 Gigabit Ethernet Managed Switch Hardware Installation Guide contains detailed information about the hardware specifications of the switches in this series. It also contains brief information on how to configure and manage a switch in this series.
Switch Description The DXS-3610 series is the latest generation of Managed switches from D-Link. Switches in this series feature a wide selection of different ports types and speeds that can be used to interconnect a variety of networking devices to communicate with each other.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide 2. Hardware Components Front Panel Components Rear Panel Components Side Panel Components Front Panel Components The front panel features components like LED indicators, a Console port, an MGMT port, a micro-USB port, a reset button, and a variety of Ethernet ports.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 2-2 DXS-3610-54S Front Panel This following table lists the front panel components unique to the DXS-3610-54S: Port Type Port Number Description SFP+ Ports Ports 1 to 48 This switch is equipped with 48 SFP+ ports that can operate...
Page 9
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Color Status Description Amber On (Blinking) Fan error Power off Link/Act Green On (Solid) Active connection through the port (Out-Of-Band port) On (Blinking) Data transmitted and received through the port...
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Phase LED(s) Behavior Turns off during this phase. Port Link/Act Lights solid amber during this phase. Phase 3 Locator Lights solid green during this phase. Power Lights solid green during this phase.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Port Description • DXS-PWR1000DC-B (-48V DC PSU with Back-to-Front airflow) When two PSU modules are installed, they will share the power load between them. Rear Panel LED Indicators The LED indicators provide valuable information in a variety of ways like their color, blinking times, and location.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide 3. Installation Installation Guidelines Installing the Switch without a Rack Installing the Switch in a Standard 19" Rack Installing Transceivers into the Transceiver Ports Installing PSU Modules into the PSU Module Slots...
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide heat dissipation from and adequate ventilation around the Switch. Leave at least 10 cm (4 inches) of space at the front, sides, and rear of the Switch for ventilation.
Page 14
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Slide the rear rack-mounting slider brackets into place, as illustrated below. Figure 3-4 Positioning the rear rack-mounting brackets Fasten the mounting brackets in any available open space in the rack using the screws provided.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Installing Transceivers into the Transceiver Ports Switches in this series are equipped with QSFP28 ports and the DGS-3610-54S is equipped with SFP+ ports. These ports can be used to connect various networking devices to this switch that do not support the standard RJ45 wiring connection.
Page 16
The figure below illustrates how to properly insert SFP/SFP+ transceivers into the 10GE SFP+ ports. Figure 3-7 Inserting SFP/SFP+ transceivers into the SFP+ ports NOTE: For the full list of D-Link SFP/SFP+/QSFP+/QSFP28 transceivers that are supported on the Switch, refer to the Supported SFP/SFP+/QSFP+/QSFP28 Transceivers table on page 30.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Installing PSU Modules into the PSU Module Slots The Switch supports the installation of AC PSU (Power Supply Unit) modules and/or DC PSU modules into the PSU module slots.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 3-9 Installed AC PSU Module A second AC PSU module can be installed into the second PSU module slot labelled PSU-2. If the primary AC PSU fails, the second AC PSU is used to provide AC power to the Switch. This takes place immediately and automatically.
Page 19
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Insert the new DC PSU module into the power supply module slot until the release clip securely clicks into place. Figure 3-10 Installing a DC PSU Module Figure 3-11 Installed DC PSU Module A second DC PSU module can be installed into the second PSU module slot labelled PSU-2.
Page 20
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide When the DC PSU module is securely installed, insert the one end of the DC power cord, with the plug, into the matching DC power socket on the DC PSU module and the other end of the DC power cord to the DC power source (- 48VDC/5.2A).
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Installing Fan Modules into the Fan Module Slots This section guides the user through installing fan modules into the fan module slots. On the rear panel of the Switch, there are five fan module slots.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Figure 3-14 Installed Fan Module Smart Fans The fan modules are capable to automatically adjust their speed depending on the IC sensor reading of the temperature required. This feature is so sensitive that it can even adjust the speed of the fan to accurately control the internal temperature.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide 4. Switch Connections Stacking the Switch Switch to Server Switch to Switch Switch to End Node Stacking the Switch Switches in this series support stacking up to 12 switches together while being managed through one console connection or MGMT connection on the master switch or through any of the RJ45/SFP+/QSFP28 ports using Telnet, the Web UI, and SNMP.
Page 24
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide In the following diagram, switches are stacked in the Duplex Ring topology. Figure 4-2 Duplex Ring Stacking Topology Physical stacking needs to be enabled and can be configured to support a 2-port, 4-port, or 6-port stacking configuration.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Switch to Switch The Switch can be used to connect to any other switch or hub in the network. This network topology is used when the Switch does not have enough ports to cater for all the end nodes in the network.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Switch to End Node An end node is a generic name for edge networking devices that will be connected to this switch. Typical examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more. Each end node should be fitted with an RJ45 networking port.
Enter key. The Console port offers an Out-Of-Band (OOB) connection to the CLI and the LAN ports offers an in-band connection to the CLI using Telnet or SSH. NOTE: For more information about the CLI, refer to the DXS-3610 Series CLI Reference Guide. Connecting to the Console Port The Console port is used to connect to the CLI of the Switch.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Logging into the CLI At the login screen, enter the Username and Password and press Enter after each entry to access the CLI. DXS-3610-54S TenGigabit Ethernet Switch Command Line Interface Firmware: Build 1.00.028...
Microsoft’s Internet Explorer, Mozilla Firefox, Google Chrome, or Safari. The LAN ports offers an in-band connection to the Web UI using HTTP or HTTPS (SSL). NOTE: For more information about the Web UI, refer to the DXS-3610 Series Web UI Reference Guide. Connecting to the Web UI To access the Web UI, open a standard web browser, enter the IP address of the Switch into the address bar of the browser, and press the Enter key.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Web Interface Navigation After accessing the Web UI, the following is displayed: AREA 1 AREA 2 AREA 4 AREA 3 Figure 5-4 Web User Interface Areas (Standard Mode) The Web UI is divided into four distinct areas that are described in the table below:...
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide SNMP-based Management The Switch can be managed with an SNMP-compatible console program. The Switch supports Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. An SNMP agent decodes the incoming SNMP messages and responds to requests with MIB objects stored in the database.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Appendix A - Technical Specifications Physical Specifications Feature Description Dimensions DXS-3610-54T 441 mm (W) x 487.4 mm (D) x 44 mm (H) DXS-3610-54S 441 mm (W) x 487.4 mm (D) x 44 mm (H)
Page 33
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Physical Specifications 1 KV DC Power 0.5 KV Signal 1 KV (10G RJ45 Port) USB Port Connector Type Micro USB Standard Compliance USB 2.0 (5V/1A) Environment Specifications Feature Description Temperature Operating: 0°C to 45°C (32°F to 113°F)
Page 34
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Performance Specification • Maximum of 1K static IPv4 routes • Maximum of 512 static IPv6 routes Access Control List Supports the following: (ACL) Entries • Maximum of 2304 MAC ingress ACL entries •...
Page 35
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Port Type Specifications • Only full-duplex operation • IEEE 802.3X flow control for the full-duplex mode All QSFP28 ports are backwards compatible to support QSFP+ transceivers. Supported SFP/SFP+/QSFP+/SFP28 Transceivers...
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Appendix B - Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge, or hub, a straight-through Category 5/5e/6a/7 cable is necessary. The following diagrams and tables show the standard RJ45 receptacle/connector and their pin assignments.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Console Cable A console cable is used to connect to the RJ45 console port of the Switch to access the command line interface. The following diagram and table show the standard RJ45 to RS-232cable and pin assignments.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Safety/Sécurité Safety Instructions Consignes de sécurité General Precautions for Rack-Mountable Products Protecting Against Electrostatic Discharge Safety Instructions Please pay careful attention to the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide • Observe the extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
Page 41
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide • Un objet est tombé dans le produit. • Le produit a été exposé à l'eau. • Le produit est tombé ou a été endommagé. • Le produit ne fonctionne pas correctement lorsque les instructions d'utilisation sont correctement suivies.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide • 100 V/50 Hz est utilisé principalement dans l'est du Japon et 100 V/ 60 Hz dans l'ouest du Japon. • 230 V/50 Hz est principalement utilisé en Europe, au Moyen-Orient, en Afrique et en Extrême-Orient.
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide Protecting Against Electrostatic Discharge Static electricity can harm delicate components inside the system. To prevent static damage, discharge static electricity from your body before touching any of the electronic components, such as the microprocessor. This can be done by periodically touching an unpainted metal surface on the chassis.
The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
Page 45
D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
Page 46
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Page 47
This guide is only for initial configuration. Please refer to the user manual to learn more or visit http://www.mydlink.com for more information. Also feel free to contact us. U.S. and Canadian customers can contact D-Link Technical Support through our website. http://support.dlink.com Canada...
Page 48
Europe customers TECHNICAL SUPPORT TECHNISCHE UNTERSTÜTZUNG ASSISTANCE TECHNIQUE ASISTENCIA TÉCNICA SUPPORTO TECNICO TECHNISCHE ONDERSTEUNING POMOC TECHNICZNA TECHNICKÁ PODPORA TECHNIKAI TÁMOGATÁS eu.dlink.com/support TEKNISK STØTTE TEKNISK SUPPORT TEKNINEN TUKI TEKNISK SUPPORT ASSISTÊNCIA TÉCNICA ΤΕΧΝΙΚΉ ΥΠΟΣΤΉΡΙΞΗ TEHNIČKA PODRŠKA TEHNIČNA PODPORA SUPORT TEHNIC ТЕХНИЧЕСКА ПОДДРЪЖКА TECHNICKÁ...
Page 49
Indonesia - www.dlink.co.id Malaysia - www.dlink.com.my Philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea customers Tel : 1899-3540 Monday to Friday 9:30am to 6:30pm Web : http://d-link.co.kr E-mail : support@kr.dlink.com New Zealand customers Tel: 0800-900-900 24/7 Technical Support Web: http://www.dlink.co.nz E-mail: support@dlink.co.nz...
Page 50
D-Link Middle East Dubai, U.A.E. Tel: +971-4-8809022 Fax: +971-4-8809066 / 8809069 Technical Support: +971-4-8809033 General Inquiries: info.me@me.dlink.com Tech Support: support.me@me.dlink.com Egypt Technical Support Call Center: +20 2258 66777 General Inquiries: info.eg@me.dlink.com Tech Support : support.eg@me.dlink.com Kingdom of Saudi Arabia: Technical Support: +966 1121 70009 General Inquiries: info.sa@me.dlink.com...
Page 51
Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка компании D-Link работает в круглосуточном режиме ежедневно, кроме официальных праздничных дней. Звонок...
Page 52
Офисы Россия Հայաստան Москва, Графский переулок, 14 Երևան, Դավթաշեն 3-րդ Тел. : +7 (495) 744-00-99 թաղամաս, 23/5 E-mail: mail@dlink.ru Հեռ.՝ +374 (10) 39-86-67 Էլ. փոստ՝ info@dlink.am Україна Київ, вул. Межигірська, 87-А Latvija Тел.: +38 (044) 545-64-40 Rīga, Lielirbes iela 27 E-mail: ua@dlink.ua Tel.: +371 (6) 761-87-03 E-mail: info@dlink.lv...
Page 53
Soporte Técnico Para Usuarios En Latino America Por favor revise el número telefónico del Call Center de su país en http://www.dlinkla.com/soporte/call-center Soporte Técnico de D-Link a través de Internet Horario de atención Soporte Técnico en www.dlinkla.com e-mail: soporte@dlinkla.com & consultas@dlinkla.com Clientes de Brasil Caso tenha dúvidas na instalação do produto, entre em contato com o...
Page 55
Pelanggan Indonesia Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Tel: 0800-14014-97 (Layanan Bebas Pulsa) Dukungan Teknis D-Link melalui Internet: Pertanyaan Umum: sales@id.dlink.com Bantuan Teknis: support@id.dlink.com Website : http://www.dlink.co.id 日本のお客様 この度は弊社製品をお買い上げいただき、誠にありがとうございます。 製品に同梱されている保証書の購入元にお問い合わせください。...
Page 56
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...