D-Link DXS-3600 Series Reference Manual page 431

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
IPV6-ADDRESS
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The host name specified in this command needs to be qualified. To delete a static host entry, use the no
command.
Example
This example shows how to configure the mapping of the host name "www.abc.com" and the IP address
192.168.5.243.
Switch# configure terminal
Switch(config)# ip host www.abc.com 192.168.5.243
Switch(config)#
31-6 ip name-server
This command is used to configure the IP address of a domain name server. Use the no form of this
command to delete the configured domain name server.
ip name-server [vrf VRF-NAME] {IP-ADDRESS | IPV6-ADDRESS} [{IP-ADDRESS2 | IPV6-
ADDRESS2}]
no ip name-server [vrf VRF-NAME] {IP-ADDRESS | IPV6-ADDRESS} [{IP-ADDRESS2 | IPV6-
ADDRESS2}]
Parameters
VRF-NAME
IP-ADDRESS
IPV6-ADDRESS
IP-ADDRESS2...IP-
ADDRESS6
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Specifies the IPv6 address of the equipment.
(Optional) Specifies the name of the VRF instance.
Specifies the IPv4 address of the domain name server.
Specifies the IPv6 address of the domain name server.
Specifies multiple IP addresses, separated by spaces. Up to four
servers can be specified.
431