Show Ip Dhcp Relay - D-Link xStack DWS-3200 Series Cli Manual

show ip dhcp relay

The show ip dhcp relay Privileged EXEC mode command displays the defined DHCP relay server addresses
available for DHCP relay.
Syntax
show ip dhcp relay
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command is only functional if the device is in Router mode.
Example
The following example displays DHCP relay server addresses.
Example
Console# show ip dhcp relay
DHCP relay is enabled.
Servers: 172.16.1.11, 172.16.8.11
Page 166
IP Routing Commands
ip route