Show Dhcp Binding - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index Begin Address
----- -------------
1 192.168.0.1
2 10.10.10.10
Total Entries : 2
DGS-3000-26TC:admin#
21-34

show dhcp binding

Description
This command is used to display dynamic binding entries.
Format
show dhcp binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter a DHCP pool name.
Restrictions
None.
Example
To display dynamic binding entries for "engineering":
DGS-3000-26TC:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name IP Addresss
------------ -------------- ------------------ --------
engineering 192.168.0.1
engineering 192.168.0.2
engineering 192.168.0.3
engineering 192.168.0.4
Total Entries: 4
DGS-3000-26TC:admin#
End Address
--------------
192.168.0.100
10.10.10.11
Hardware Address
00-80-C8-08-13-88
00-80-C8-08-13-99
00-80-C8-08-13-A0
00-80-C8-08-13-B0
267
Type Status Lifetime
------- ---------
Ethernet Manual
Ethernet Automatic 86400
Ethernet Automatic 86400
Ethernet Automatic 86400
86400