D-Link DXS-3600 Series Reference Manual page 221

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
MAX Suppress Time
Unreachable route's Half-life
Switch#
10-84 show ip bgp filter-list
This command is used to display routes that conform to a specified AS path access list.
show ip bgp [ipv4 unicast | vpnv4 {all | rd RD-VALUE | vrf VRF-NAME}] filter-list ACCESS-LIST-
NAME
Parameters
ipv4
vpnv4
unicast
all
rd RD-VALUE
vrf VRF-NAME
ACCESS-LIST-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the BGP routes that conform to a specific access list. If no option is
specified for the command, the information for IPv4 unicast address family will be displayed.
Example
This example shows how to displays the BGP routes that conform to the AS path access-list, as-ACL-HQ.
Switch# show ip bgp filter-list as-ACL-HQ
BGP table version is 1738, local router ID is 172.16.72.24
Status codes: s suppressed,d damped,h history,* valid,> best,i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network
: 60 mins
: 15 mins
(Optional) Specifies the IPv4 address family. The type of address
family determines the routing table that is displayed.
(Optional) Specifies to display the VPNv4 address family routing
entries.
Specifies to display the unicast routing information.
(Optional) Specifies to display all the VPNv4 routing entries.
(Optional) Specifies to display the VPNv4 routing entries that match
the specified RD.
(Optional) Specifies to display the VPNv4 routing entries associated
with the VRF.
Specifies an AS path access list and only the routes match the access
list are displayed.
Next Hop Metric
221
LocPrf Weight Path