D-Link DXS-3600 Series Reference Manual page 305

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to display the content of the debug buffer or utilization information of the debug
buffer.
debug show buffer [utilization]
Parameters
utilization
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the content of the debug buffer or utilization information of the debug buffer.
Example
This example shows how to display the debug buffer information.
Switch# debug show buffer
Debug buffer is empty
Switch#
This example shows how to display the debug buffer utilization.
Switch# debug show buffer utilization
Debug buffer is allocated from system memory
Total size is 2M
Utilization is 30%
Switch#
17-8 debug show output
This command is used to display the debug status and output information of the modules.
debug show output
Parameters
None.
Default
(Optional) Specifies to display the utilization of the debug buffer. If not
specified, this will display the content in the buffer.
305