D-Link DXS-3600 Series Reference Manual page 587

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
show ip multicast-statistics [igmp] [pim] [dvmrp] [interface [INTERFACE-ID]]
Parameters
INTERFACE-ID
igmp
pim
dvmrp
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the counters of both received and sent multicast protocol packets on the
switch according to the message type.
Example
This example shows how to display the multicast protocol packets counter on the switch.
Switch# show ip multicast-statistics
IGMP Packets Counter
IGMP Query v1/v2/v3
IGMP Report v1/v2/v3
IGMP Leave
Unknown IGMP
PIM Packets Counter
PIM Hello
PIM Register
PIM Register-Stop
PIM Join/Prune
PIM Bootstrap
PIM Assert
PIM Graft
PIM Graft-Ack
PIM C-RP-Adv
PIM State Refresh
Unknown PIM
DVMRP Packets Counter
(Optional) Specifies the interface name for which to display IP
multicast statistics counter.
(Optional) Specifies to display both received and sent IGMP packets
counter.
(Optional) Specifies to display both received and sent PIM packets
counter.
(Optional) Specifies to display both received and sent DVMRP packets
counter.
Received
0/0/0 0/0/0
0/0/0 0/0/0
0
0
Received Sent
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Received Sent
587
Sent
0
0