D-Link DXS-3600 Series Reference Manual page 279

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
CFM MD Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to configure the default transmission of the sender ID TLV by MPs contained by
the MD. An enumerated value indicates what, if anything, is to be included in the sender ID TLV
transmitted by MPs configured in this maintenance domain.
Example
This example shows how to configure sender ID TLV by MPs. Transmit the sender ID TLV with the
chassis ID information.
Switch# configure terminal
Switch(config)# cfm domain op-domain level 2
Switch(config-cfm-md)# sender-id chassis
Switch(config-cfm-md)#
14-24 sender-id (cfm ma configuration)
This command is used to configure the transmission of the sender ID TLV by MPs for an MA. To reset the
configuration of the transmission of the sender ID TLV to default setting, use the no command
sender-id {none | chassis | manage | chassis-manage | defer}
no sender-id
Parameters
none
chassis
manage
chassis-manage
defer
Default
By default, this option is defer.
Command Mode
CFM MA Configuration Mode.
Command Default Level
Level: 12.
Specifies not to transmit the sender ID TLV. In the CFM hardware
mode, the value is fixed to none.
Specifies to transmit the sender ID TLV with the chassis ID
information.
Specifies to transmit the sender ID TLV with the managed address
information.
Specifies to transmit the sender ID TLV with the chassis ID information
and the managed address information.
Specifies to inherit the setting configured for the maintenance domain
that the MA is associated with. This is the default value.
279