DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
POLICY-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the policy name is specified, only the specified policy information is displayed. If the policy name is not
specified, information is displayed for all policies.
Example
This example shows how to displayed for all policies.
Switch# show ipv6 dhcp guard policy
DHCP guard policy: default
Device Role: DHCP client
Target: eth1/0/3
DHCP guard policy: test1
Device Role: DHCP server
Source Address Match Access List: acl1
Target: eth1/0/1
Switch#
Display Parameters
Device Role
Target
Source Address Match
Access List
(Optional) Specifies the DHCPv6 guard policy name.
The role of the device. The role is either client or server.
The name of the target. The target is an interface.
The IPv6 access list of the specified policy.
385