D-Link DXS-3600 Series Reference Manual page 219

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
ipv4
vpnv4
unicast
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to show flap entries in the BGP routing table. If no option is specified for the command,
the information for IPv4 unicast address family will be displayed.
Example
This example shows how to show flap entries in the BGP routing table.
Switch# show ip bgp dampening flap-statistics
BGP table version is 1538, local router ID is 172.29.232.182
Status codes: s suppressed, d damped, h history, * valid, > best, i –internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network
*d 10.10.0.0/8
*d 10.20.0.0/16
Switch#
Display Parameters
BGP table version
local router ID
Status codes
Origin codes
(Optional) Specifies to display the IPv4 address family routing entries.
(Optional) Specifies to display the VPNv4 address family routing
entries.
Specifies to display the unicast routing entries.
(Optional) Specifies to display the VPNv4 routing entries associated
with the VRF.
From Flaps
172.33.22. 77 6
172.339.22. 77 6
The internal version number of the table. This number is incremented
whenever the table changes.
The IP address of the router.
The status of the path. It can be one of the following values:
s - The path is suppressed.
d - The path is dampened.
h - The entry is a history path.
* - The path is valid.
> - The entry is the best path to that network.
i - The path was learned via an iBGP session.
The origin of the entry. It can be one of the following values:
i - Entry originated from IGP.
e - Path originated from EGP.
219
Duration Reuse
00:15:41 00:28:10
00:02:43 00:23:20
Path
100i
100i