D-Link DXS-3600 Series Reference Manual page 958

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Level: 1.
Usage Guideline
The routing table gathers routes learned from different protocols. If multiple routes can reach the same
network, the one with the best distance and the next hop is reachable will be chosen as the best and set
to hardware for routing of packets. They are the route entry currently at work. That is, if the route with the
best distance is with the unreachable next hop, then the route with the next preferred distance will be
chosen.
Example
This example shows how to display the routing table.
Switch# show ip route
Codes: C - connected, S - static, R - RIP, B - BGP O - OSPF,
IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2,
* - candidate default
Gateway of last resort is 10.2.2.2 to network 0.0.0.0
O E2 10.110.0.0/8
R 10.67.10.0/8
O E2 10.68.132.0/8 [160/5]
O E2 10.130.0.0/8
R 10.128.0.0/8
R 10.129.0.0/8
R 10.65.129.0/8 [200/128] via 10.119.254.244, vlan2, 0DT0H2M22S
R 10.10.0.0/8
R 10.75.139.0/8 [200/129] via 10.119.254.240, vlan2, 0DT0H2M23S
R 10.16.208.0/8 [200/128] via 10.119.254.244, vlan2, 0DT0H2M22S
R 10.84.148.0/8 [200/129] via 10.119.254.240, vlan2 0DT0H2M23S
R 10.31.223.0/8 [200/128] via 10.119.254.244, , vlan2 0DT0H2M22S
Total Entries: 11 entries, 11 routes
Switch#
Display Parameters
Code
Sub Code
[160/5] via 10.119.254.6, vlan2,
[200/128] via 10.119.254.244, vlan2, 0DT0H2M22S
via 10.119.254.6,
[160/5] via 10.119.254.6,
[200/128] via 10.119.254.244, vlan2, 0DT0H2M22S
[200/129] via 10.119.254.240, vlan2, 0DT0H2M22S
[200/128] via 10.119.254.244, vlan2, 0DT0H2M22S
Indicates the source type that the route is derived from. It can be one
of the following values:
C - Connected.
S - Static.
R - Routing Information Protocol (RIP) derived.
B - Border Gateway Protocol (BGP) derived.
O - Open Shortest Path First (OSPF) derived.
C - Connected.
The type of route. It can be one of the following values:
IA - OSPF interarea route.
E1 - OSPF external type 1 route.
E2 - OSPF external type 2 route.
958
0DT0H1M
vlan2, 0DT0H0M59S
vlan2, 0DT0H0M59S