D-Link DXS-3600 Series Reference Manual page 48

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
If an IP access group is already configured on the interface, the command applied later will overwrite the
previous setting. Only one access list of the same type can be applied to the same interface; but access-
lists of different types can be applied to the same interface.
The association of an access group with an interface will consume the filtering entry resource in the
switch controller. If the resources are insufficient to commit the command, then an error message will be
displayed. There is a limitation on the number of port operator resources. If applying the command
exhausts the available port selectors, then an error message will be displayed.
Example
This example shows how to specify the IP access list "Strict-Control" as an IP access group for an
Ethernet port 6/0/2.
Switch# configure terminal
Switch(config)# interface eth6/0/2
Switch(config-if-gi)#ip access-group Strict-Control
The remaining applicable IP related access entries are 2500
The remaining applicable port operators are 10
Switch(config-if-gi)#
4-8 ip access-list
This command is used to create or modify an IP access list. This command will enter into the IP access
list configuration mode. Use the no command to remove an IP access list.
ip access-list [extended] NAME [NUMBER]
no ip access-list [extended] {NAME | NUMBER}
Parameters
extended
NAME
NUMBER
Default
egress direction.
(Optional) Specifies that without this option the IP access list is a
standard IP access list. When using the extended option, more fields
can be chosen for the filter.
Specifies the name of the IP access list to be configured. The
maximum length is 32 characters. The first character must be a letter.
(Optional) Specifies the ID number of the IP access list. For standard
IP access lists, this value is from 1 to 1999. For extended IP access
lists, this value is from 2000 to 3999.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents