D-Link DXS-3600 Series Reference Manual page 98

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
No AAA authentication method is configured.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to configure the default authentication method list for 802.1X authentication. Initially,
the default method list is not configured. The authentication of 802.1X requests will be performed based
on the local database.
Example
This example shows how to set the default methods list for authenticating dot1X users.
Switch#configure terminal
Switch(config)# aaa authentication dot1x default group radius
7-7 aaa authentication login
This command is used to configure the method list used for login authentication. Use the no command to
remove a login method list.
aaa authentication login {default | LIST-NAME} METHOD1 [METHOD2...]
no aaa authentication login {default | LIST-NAME}
Parameters
default
LIST-NAME
METHOD1 [METHOD2...]
group GROUP-NAME – Specifies to use the server groups defined by
the AAA group server.
none - Normally, the method is listed as the last method. The user will
pass authentication if it is not denied by previous method
authentication.
Specifies to configure the default method list for login authentication.
Specifies the name of the method list other than the default method
list. This name can be up to 32 characters long.
Specifies the list of methods that the authentication algorithm tries in
the given sequence. Enter at least one method or enter up to four
methods. The following are keywords that can be used to specify a
method.
local – Specifies to use the local database for authentication.
group radius – Specifies to use the servers defined by the RADIUS
server host command.
group tacacs+ - Specifies to use the servers defined by the
TACACS+ server host command.
group GROUP-NAME – Specifies to use the server groups defined by
the AAA group server command.
none - Normally, the method is listed as the last method. The user will
98

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents