Debug Ip Bgp Show Network - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to check the internal status and detailed information of a BGP peer group.
Example
This example shows how to display internal detailed information about a BGP peer group:
Switch# debug ip bgp show peer-group
BGP Peer Group :local1
-------------------------------------------------------
Session State : Enabled
Session Activity : Enabled
Members : 10.1.1.3
Remote AS : Not Set
Holdtime Interval : 180 seconds
Keepalive Interval : 60 seconds
Advertisement Interval : 0 seconds
AS Origination Interval : 0 Seconds
Connect Retry Interval : 0 Seconds
EBGP Multihop : 255
Weight : 0
Update Source : loopback1
Next Hop Self : Disabled
Remove Private As : Disabled
Allowas In : Disabled
Soft Reconfiguration Inbound : Disabled
Community Sent to this Neighbor : None
Default Originate : Disabled
Capability ORF Prefix List : None
Pass Word:
Prefix Max Count: 12000
Prefix Warning Threshold: 75
Prefix Max Warning: Disabled
Switch#
10-108

debug ip bgp show network

This command is used to display internal detailed information about the BGP network.
debug ip bgp show network [vrf VRF-NAME]
of VPNv4.
245