D-Link xStack DGS-3120 Series Manuals

Manuals and User Guides for D-Link xStack DGS-3120 Series. We have 7 D-Link xStack DGS-3120 Series manuals available for free PDF download: Cli Reference Manual, Manual, Reference Manual, Product Manual, Hardware Installation Manual, How To Set Up

D-Link xStack DGS-3120 Series Cli Reference Manual (1150 pages)

DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch

Brand: D-Link | Category: Switch | Size: 5.41 MB

Table of Contents
2
Chapter 1 Using Command Line Interface

6
Chapter 2 Basic Command List

13
- Enable Clipaging
  15
- Disable Clipaging
  16
- Config Terminal Width
  23
- Show Terminal Width
  24
- Config Ports
  24
- Show Ports
  26
Chapter 3 802.1Q VLAN Command List

28
- Create Vlan
  28
- Create Vlan Vlanid
  29
- Delete Vlan
  30
- Delete Vlan Vlanid
  30
- Config Vlan
  31
- Config Vlan Vlanid
  32
- Show Vlan
  33
- Show Vlan Ports
  34
- Show Vlan Vlanid
  35
- Enable Pvid Auto Assign
  37
- Disable Pvid Auto Assign
  37
- Config Gvrp
  38
- Show Gvrp
  39
- Enable Gvrp
  40
- Disable Gvrp
  40
- Show Private Vlan
  42
Chapter 4 802.1X Command List

43
- Config Radius Add
  58
- Config Radius Delete
  59
- Config Radius
  60
- Show Radius
  61
Chapter 5 Access Authentication Control Command List

67
- Enable Password Encryption
  69
- Disable Password Encryption
  70
- Config Authen Application
  78
- Show Authen Application
  79
- Config Authen Parameter Attempt
  86
- Show Authen Parameter
  87
- Enable Admin
  88
- Show Accounting
  94
- Show Aaa
  104
- Config Accounting Service
  105
- Show Accounting Service
  106
Chapter 6 Access Control List (ACL) Command List

108
Chapter 7 Access Control List (ACL) Egress Command List (RI and EI Mode Only)

128
Chapter 8 Address Resolution Protocol (ARP) Command List

147
- Config Arpentry
  148
- Clear Arptable
  149
- Show Arpentry
  150
Chapter 9 ARP Spoofing Prevention Command List

152
Chapter 10 Asymmetric VLAN Command List

154
Chapter 11 Auto-Configuration Command List

156
- Enable Autoconfig
  156
- Disable Autoconfig
  156
- Show Autoconfig
  157
Chapter 12 Basic Commands Command List

158
- Create Account
  158
- Config Account
  159
- Show Account
  160
- Delete Account
  161
- Show Switch
  162
- Enable Telnet
  163
- Disable Telnet
  163
- Enable Web
  164
- Disable Web
  164
- Config Firmware Image
  166
- Config Ipif
  168
- Delete Ipif
  170
- Enable Ipif
  170
- Disable Ipif
  171
- Show Ipif
  172
Chapter 13 BPDU Attack Protection Command List

176
Chapter 14 Cable Diagnostics Command List

181
Chapter 15 Command Logging Command List

184
- Enable Command Logging
  184
- Disable Command Logging
  184
- Show Command Logging
  185
Chapter 16 Compound Authentication Command List

187
- Config Authentication Ports
  189
- Show Authentication Ports
  192
- Enable Authorization Attributes
  193
- Disable Authorization Attributes
  194
- Show Authorization
  194
- Config Authentication Server Failover
  195
- Show Authentication
  195
Chapter 17 Configuration Command List

198
- Show Config
  198
- Config Configuration
  200
- Show Boot File
  201
Chapter 18 Configuration Trap Command List

203
Chapter 19 Connectivity Fault Management (CFM) Command List (RI and EI Mode Only)

205
- Create Cfm MD
  206
- Config Cfm MD
  206
- Create Cfm Ma
  207
- Config Cfm Ma
  208
- Create Cfm Mep
  209
- Config Cfm Mep
  210
- Delete Cfm Mep
  212
- Delete Cfm Ma
  213
- Delete Cfm MD
  214
- Enable Cfm
  214
- Disable Cfm
  215
- Config Cfm Ports
  216
- Show Cfm Ports
  216
- Show Cfm
  217
- Show Cfm Fault
  219
- Show Cfm Port
  220
- Cfm Loopback
  221
- Cfm Linktrace
  222
- Show Cfm Linktrace
  223
- Delete Cfm Linktrace
  225
- Show Cfm Mipccm
  226
Chapter 20 Connectivity Fault Management (CFM) Extension Command List (RI and EI Mode Only)

233
- Config Cfm Ais
  233
- Config Cfm Lock
  234
Chapter 21 CPU Interface Filtering Command List

237
Chapter 22 Debug Software Command List

248
- Debug Buffer
  251
- Debug Output
  252
- Debug Config State
  254
- Debug Show Status
  257
Chapter 23 Denial-Of-Service (Dos) Attack Prevention Command List

291
Chapter 24 DHCP Local Relay Command List

295
Chapter 25 DHCP Relay Command List

299
Chapter 26 DHCP Server Command List (RI Mode Only)

323
- Clear Dhcp Binding
  335
- Show Dhcp Binding
  336
Chapter 27 DHCP Server Screening Command List

342
Chapter 28 Dhcpv6 Relay Command List

354
Chapter 29 Digital Diagnostic Monitoring (DDM) Command List (RI and EI Mode Only)

364
- Show DDM
  369
Chapter 30 Distance Vector Multicast Routing Protocol (DVMRP) Command List (RI Mode Only)

371
- Enable Dvmrp
  372
Chapter 31 Domain Name System (DNS) Resolver Command List

378
Chapter 32 D-Link License Management System (DLMS) Command List

385
Chapter 33 D-Link Unidirectional Link Detection (DULD) Command List (RI and EI Mode Only)

387
Chapter 34 Energy Efficient Ethernet (EEE) Command List

389
Chapter 35 Ethernet Ring Protection Switching (ERPS) Command List (RI and EI Mode Only)

391
Chapter 36 FDB Command List

401
- Create Fdb Vlanid
  402
- Delete Fdb
  406
- Clear Fdb
  406
- Show Fdb
  408
Chapter 37 Filter Command List

411
Chapter 38 Flash File System (FFS) Command List

414
- Change Drive
  415
Chapter 39 Gratuitous ARP Command List

425
Chapter 40 Internet Group Management Protocol (IGMP) Command List (RI Mode Only)

431
- Show Igmp
  432
- Show Igmp Group
  433
Chapter 41 IGMP Proxy Command List (RI Mode Only)

439
Chapter 42 IGMP Snooping Command List

444
Chapter 43 IP-MAC-Port Binding (IMPB) Command List (RI and EI Mode Only)

468
Chapter 44 IP Multicast (IPMC) Command List (RI Mode Only)

495
Chapter 45 IP Route Filter Command List (RI Mode Only)

497
Chapter 46 IP Tunnel Command List (RI Mode Only)

504
Chapter 47 Ipv6 Neighbor Discover Command List

512
- Show Ipv6 Nd
  515
Chapter 48 Ipv6 Route Command List

519
- Delete Ipv6Route
  520
- Show Ipv6Route
  520
Chapter 49 Japanese Web-Based Access Control (JWAC) Command List

522
Chapter 50 Jumbo Frame Command List

546
Chapter 51 Layer 2 Protocol Tunneling (L2PT) Command List

548
Chapter 52 Link Aggregation Command List

552
Chapter 53 Link Layer Discovery Protocol (LLDP) Command List

559
- Enable Lldp
  559
- Disable Lldp
  560
- Config Lldp
  561
- Config Lldp Ports
  562
- Show Lldp
  567
- Show Lldp Ports
  568
- Show Lldp Statistics
  576
- Show Lldp Statistics Ports
  576

D-Link xStack DGS-3120 Series Manual (852 pages)

Layer 2 Managed Stackable Gigabit Switch

Brand: D-Link | Category: Switch | Size: 4.39 MB

Table of Contents

2
- Chapter 1 Using Command Line Interface
  
  5
  - Command Syntax Symbols
    10
  - Line Editing Keys
    10
- Chapter 2 Basic Command List
  
  12
  - Enable Clipaging
    14
  - Disable Clipaging
    15
  - Config Terminal Width
    22
  - Show Terminal Width
    23
  - Config Ports
    23
  - Show Ports
    25
- Chapter 3 802.1Q VLAN Command List
  
  27
  - Create Vlan
    27
  - Create Vlan Vlanid
    28
  - Delete Vlan
    29
  - Delete Vlan Vlanid
    29
  - Config Vlan
    30
  - Config Vlan Vlanid
    31
  - Show Vlan
    32
  - Show Vlan Ports
    33
  - Show Vlan Vlanid
    34
  - Enable Pvid Auto Assign
    36
  - Disable Pvid Auto Assign
    36
  - Config Gvrp
    37
  - Show Gvrp
    38
  - Enable Gvrp
    39
  - Disable Gvrp
    39
  - Show Private Vlan
    41
- Chapter 4 802.1X Command List
  
  43
  - Config Radius Add
    57
  - Config Radius Delete
    58
  - Config Radius
    59
  - Show Radius
    60
  - Config Accounting Service
    66
  - Show Accounting Service
    67
Chapter 5 Access Authentication Control Command List

68
Chapter 7 Access Control List (Acl) Egress Command List (Ei Mode Only)

111
- Create Egress_Access_Profile Profile_Id <Value 1-4> Profile_Name <Name
  112
- Show Current_Config Egress_Access_Profile
  121
- Show Egress_Flow_Meter {[Profile_Id <Value 1-4> | Profile_Name <Name 1-32>] {Access_Id
  125
- Chapter 8 Address Resolution Protocol (ARP) Command List
  
  130
  - Config Arpentry
    131
  - Clear Arptable
    132
  - Show Arpentry
    133
- Chapter 9 ARP Spoofing Prevention Command List
  
  135
- Chapter 10 Asymmetric VLAN Command List
  
  137
- Chapter 11 Auto-Configuration Command List
  
  139
  - Enable Autoconfig
    139
  - Disable Autoconfig
    139
  - Show Autoconfig
    140
- Chapter 12 Basic Commands Command List
  
  141
  - Create Account
    141
  - Config Account
    142
  - Show Account
    143
  - Delete Account
    144
  - Show Switch
    145
  - Enable Telnet
    146
  - Disable Telnet
    146
  - Enable Web
    147
  - Disable Web
    147
  - Config Firmware Image
    149
  - Config Ipif
    151
  - Show Ipif
    155
- Chapter 13 BPDU Attack Protection Command List
  
  158
- Chapter 14 Cable Diagnostics Command List
  
  163
- Chapter 15 Command Logging Command List
  
  166
  - Enable Command Logging
    166
  - Disable Command Logging
    166
  - Show Command Logging
    167
- Chapter 16 Compound Authentication Command List
  
  169
  - Config Authentication Ports
    171
  - Show Authentication Ports
    174
  - Enable Authorization Attributes
    175
  - Disable Authorization Attributes
    175
  - Show Authorization
    176
  - Config Authentication Server Failover
    176
  - Show Authentication
    177
- Chapter 17 Configuration Command List
  
  179
  - Show Config
    179
  - Config Configuration
    181
  - Show Boot File
    182
- Chapter 18 Configuration Trap Command List
  
  184
- Chapter 19 Connectivity Fault Management (CFM) Command List (EI Mode Only)
  
  186
  - Create Cfm MD
    187
  - Config Cfm MD
    187
  - Create Cfm Ma
    188
  - Config Cfm Ma
    189
  - Create Cfm Mep
    190
  - Config Cfm Mep
    191
  - Delete Cfm Mep
    193
  - Delete Cfm Ma
    194
  - Delete Cfm MD
    195
  - Enable Cfm
    195
  - Disable Cfm
    196
  - Config Cfm Ports
    197
  - Show Cfm Ports
    197
  - Show Cfm
    198
  - Show Cfm Fault
    200
  - Show Cfm Port
    201
  - Cfm Loopback
    202
  - Cfm Linktrace
    203
  - Show Cfm Linktrace
    204
  - Delete Cfm Linktrace
    206
  - Show Cfm Mipccm
    207
- Chapter 20 Connectivity Fault Management (CFM) Extension Command List (EI Mode Only)
  
  214
  - Config Cfm Ais
    214
  - Config Cfm Lock
    215
- Chapter 21 CPU Interface Filtering Command List
  
  218
- Chapter 22 Debug Software Command List
  
  229
  - Debug Buffer
    231
  - Debug Output
    232
  - Debug Config State
    234
  - Debug Show Status
    237
- Chapter 23 DHCP Local Relay Command List
  
  244
- Chapter 24 DHCP Relay Command List
  
  248
- Chapter 25 DHCP Server Screening Command List
  
  265
- Chapter 26 Dhcpv6 Relay Command List (EI Mode Only)
  
  269
- Chapter 27 Digital Diagnostic Monitoring (DDM) Command List (EI Mode Only)
  
  274
  - Show DDM
    278
- Chapter 28 D-Link License Management System (DLMS) Command List
  
  281
- Chapter 29 D-Link Unidirectional Link Detection (DULD) Command List (EI Mode Only)
  
  283
- Chapter 30 Ethernet Ring Protection Switching (ERPS) Command List (EI Mode Only)
  
  285
- Chapter 31 Filter Command List
  
  295
- Chapter 32 Filter Database (FDB) Command List
  
  298
  - Create Fdb
    298
  - Create Fdb Vlanid
    299
  - Delete Fdb
    303
  - Clear Fdb
    303
  - Show Fdb
    305
- Chapter 33 Flash File System (FFS) Command List
  
  308
  - Change Drive
    309
- Chapter 34 Gratuitous ARP Command List
  
  319
- Chapter 35 IGMP / MLD Snooping Command List
  
  325
- Chapter 36 IP-MAC-Port Binding (IMPB) Command List (EI Mode Only)
  
  369
- Chapter 37 Ipv6 Neighbor Discover Command List (EI Mode Only)
  
  385
  - Show Ipv6 Nd
    388
- Chapter 38 Ipv6 Route Command List (EI Mode Only)
  
  389
  - Create Ipv6Route
    389
  - Delete Ipv6Route
    390
  - Show Ipv6Route
    390

D-Link xStack DGS-3120 Series Reference Manual (813 pages)

Layer 2 Managed Stackable Gigabit Switch

Brand: D-Link | Category: Switch | Size: 4.18 MB

Table of Contents

2
- Chapter 1 Using Command Line Interface
  
  5
  - Command Syntax Symbols
    9
  - Line Editing Keys
    10
- Chapter 2 Basic Command List
  
  12
  - Enable Clipaging
    14
  - Disable Clipaging
    15
  - Config Terminal Width
    22
  - Show Terminal Width
    23
  - Config Ports
    23
  - Show Ports
    25
- Chapter 3 802.1Q VLAN Command List
  
  27
  - Create Vlan
    27
  - Create Vlan Vlanid
    28
  - Delete Vlan
    29
  - Delete Vlan Vlanid
    29
  - Config Vlan
    30
  - Config Vlan Vlanid
    31
  - Show Vlan
    32
  - Show Vlan Ports
    33
  - Show Vlan Vlanid
    34
  - Enable Pvid Auto Assign
    36
  - Disable Pvid Auto Assign
    36
  - Config Gvrp
    37
  - Show Gvrp
    38
  - Enable Gvrp
    39
  - Disable Gvrp
    39
  - Show Private Vlan
    41
- Chapter 4 802.1X Command List
  
  43
  - Config Radius Add
    57
  - Config Radius Delete
    58
  - Config Radius
    59
  - Show Radius
    60
  - Config Accounting Service
    66
  - Show Accounting Service
    67
- Chapter 5 Access Authentication Control Command List
  
  68
  - Disable Password Encryption
    69
  - Config Authen Application
    77
  - Show Authen Application
    78
  - Config Authen Parameter Attempt
    86
  - Show Authen Parameter
    86
  - Enable Admin
    87
- Chapter 6 Access Control List (ACL) Command List
  
  89
- Chapter 7 Access Control List (ACL) Egress Command List (EI Mode Only)
  
  109
- Chapter 8 Address Resolution Protocol (ARP) Command List
  
  128
  - Config Arpentry
    129
  - Clear Arptable
    130
  - Show Arpentry
    131
- Chapter 9 ARP Spoofing Prevention Command List
  
  133
- Chapter 10 Asymmetric VLAN Command List
  
  135
- Chapter 11 Auto-Configuration Command List
  
  137
  - Show Autoconfig
    138
- Chapter 12 Basic Commands Command List
  
  139
  - Config Account
    140
  - Show Account
    141
  - Delete Account
    142
  - Show Switch
    143
  - Enable Telnet
    144
  - Disable Telnet
    144
  - Enable Web
    145
  - Disable Web
    145
  - Config Firmware Image
    147
  - Config Ipif
    149
  - Show Ipif
    153
- Chapter 13 BPDU Attack Protection Command List
  
  156
- Chapter 14 Cable Diagnostics Command List
  
  161
- Chapter 15 Command Logging Command List
  
  164
  - Show Command Logging
    165
- Chapter 16 Compound Authentication Command List
  
  166
  - Config Authentication Ports
    168
  - Show Authentication Ports
    170
  - Show Authorization
    172
  - Config Authentication Server Failover
    173
  - Show Authentication
    173
- Chapter 17 Configuration Command List
  
  175
  - Config Configuration
    177
  - Show Boot File
    178
- Chapter 18 Configuration Trap Command List
  
  180
- Chapter 19 Connectivity Fault Management (CFM) Command List (EI Mode Only)
  
  182
  - Create Cfm MD
    183
  - Config Cfm MD
    183
  - Create Cfm Ma
    184
  - Config Cfm Ma
    185
  - Create Cfm Mep
    186
  - Config Cfm Mep
    187
  - Delete Cfm Mep
    189
  - Delete Cfm Ma
    190
  - Delete Cfm MD
    191
  - Enable Cfm
    191
  - Disable Cfm
    192
  - Config Cfm Ports
    193
  - Show Cfm Ports
    193
  - Show Cfm
    194
  - Show Cfm Fault
    196
  - Show Cfm Port
    197
  - Cfm Loopback
    198
  - Cfm Linktrace
    199
  - Show Cfm Linktrace
    200
  - Delete Cfm Linktrace
    202
  - Show Cfm Mipccm
    203
- Chapter 20 Connectivity Fault Management (CFM) Extension Command List (EI Mode Only)
  
  210
  - Config Cfm Lock
    211
- Chapter 21 CPU Interface Filtering Command List
  
  214
- Chapter 22 Debug Software Command List
  
  225
  - Debug Buffer
    226
  - Debug Output
    228
  - Debug Config State
    229
- Chapter 23 DHCP Local Relay Command List
  
  237
- Chapter 24 DHCP Relay Command List
  
  241
- Chapter 25 DHCP Server Screening Command List
  
  258
- Chapter 26 Dhcpv6 Relay Command List (EI Mode Only)
  
  262
- Chapter 27 D-Link Unidirectional Link Detection (DULD) Command List (EI Mode Only)
  
  267
- Chapter 28 Ethernet Ring Protection Switching (ERPS) Command List (EI Mode Only)
  
  269
- Chapter 29 Filter Command List
  
  279
- Chapter 30 Filter Database (FDB) Command List
  
  282
  - Create Fdb Vlanid
    283
  - Delete Fdb
    287
  - Clear Fdb
    287
  - Show Fdb
    289
- Chapter 31 Flash File System (FFS) Command List
  
  292
  - Change Drive
    293
- Chapter 32 Gratuitous ARP Command List
  
  303
- Chapter 33 IGMP / MLD Snooping Command List
  
  309
- Chapter 34 IP-MAC-Port Binding (IMPB) Command List (EI Mode Only)
  
  353
- Chapter 35 Ipv6 Neighbor Discover Command List (EI Mode Only)
  
  369
  - Show Ipv6 Nd
    372
- Chapter 36 Ipv6 Route Command List (EI Mode Only)
  
  373
  - Delete Ipv6Route
    374
  - Show Ipv6Route
    374

D-Link xStack DGS-3120 Series Reference Manual (509 pages)

xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide

Brand: D-Link | Category: Switch | Size: 14.7 MB

Table of Contents
3
Intended Readers
11
Typographical Conventions
11
Notes, Notices and Cautions
11
Chapter 1 Web-Based Switch Configuration

12
- Introduction
  12
- Login to the Web Manager
  12
- Web-Based User Interface
  13
  - Areas of the User Interface
    13
- Web Pages
  15
Chapter 2 System Configuration

16
- Device Information
  16
- System Information Settings
  18
- Port Configuration
  18
  - DDM (RI and EI Mode Only)
    19
    
    DDM Temperature Threshold Settings
    20
    
    DDM Voltage Threshold Settings
    21
    
    DDM Bias Current Threshold Settings
    22
    
    DDM Tx Power Threshold Settings
    23
    
    DDM Rx Power Threshold Settings
    23
  - Port Settings
    25
  - Port Description Settings
    27
  - Port Error Disabled
    28
  - Port Media Type
    29
  - Port Auto Negotiation Information
    30
  - Jumbo Frame Settings
    30
  - EEE Settings
    31
- Poe (DGS-3120-24PC and DGS-3120-48PC Only)
  31
  - Poe System Settings
    32
  - Poe Port Settings
    33
- Serial Port Settings
  35
- Warning Temperature Settings
  35
- Trap Settings
  36
- System Log Configuration
  36
  - System Log Settings
    36
  - System Log Server Settings
    37
  - System Log
    38
  - System Log & Trap Settings
    38
  - System Severity Settings
    39
- Time Range Settings
  40
- Port Group Settings (RI and EI Mode Only)
  40
- Time Settings
  41
- User Accounts Settings
  41
- Command Logging Settings
  42
- Configuration Trap Settings
  43
- Stacking (EI and si Mode Only)
  43
  - Stacking Device Table
    45
  - Stacking Mode Settings
    45
- Reboot Schedule Settings
  46
- Turn on Leds
  47
Chapter 3 Management

48
- Arp
  48
  - Static ARP Settings
    48
  - Proxy ARP Settings (RI and EI Mode Only)
    49
  - ARP Table
    49
- Gratuitous ARP
  50
  - Gratuitous ARP Global Settings
    50
  - Gratuitous ARP Settings
    50
- Ipv6 Neighbor Settings
  51
- IP Interface
  52
- Management Settings
  58
- Session Table
  59
- Single IP Management
  60
  - Single IP Settings
    62
  - Topology
    62
  - Firmware Upgrade
    68
  - Configuration File Backup/Restore
    68
  - Upload Log File
    69
- SNMP Settings
  69
  - SNMP Global Settings
    70
  - SNMP Traps Settings
    71
  - SNMP Linkchange Traps Settings
    71
  - SNMP View Table Settings
    72
  - SNMP Community Table Settings
    73
  - SNMP Group Table Settings
    74
  - SNMP Engine ID Settings
    75
  - SNMP User Table Settings
    75
  - SNMP Host Table Settings
    76
  - SNMP V6Host Table Settings
    77
  - RMON Settings
    78
  - SNMP Community Encryption Settings
    78
  - SNMP Community Masking Settings
    78
- Telnet Settings
  79
- Web Settings
  79
- Power Saving
  80
  - LED State Settings
    80
  - Power Saving Settings
    80
  - Power Saving LED Settings
    81
  - Power Saving Port Settings
    82
- SD Card Management
  82
  - SD Card Backup Settings
    82
  - SD Card Execute Settings
    83
Chapter 4 L2 Features

84
- Vlan
  84
  - 802.1Q VLAN Settings
    89
  - 802.1V Protocol VLAN
    92
  - V Protocol Vlan Settings
    93
  - Asymmetric VLAN Settings
    94
  - Gvrp
    94
  - Gvrp Port Settings
    95
  - MAC-Based VLAN Settings
    96
  - Private VLAN Settings
    96
  - PVID Auto Assign Settings
    98
  - VLAN Counter Settings (RI and EI Mode Only)
    98
  - Voice VLAN
    99
    
    Voice Vlan Port Settings
    100
    
    Voice Vlan Oui Settings
    100
    
    Voice Vlan Device
    101
  - Surveillance VLAN
    102
  - VLAN Trunk Settings
    104
  - Browse VLAN
    105
  - Show VLAN Ports
    105
- Qinq (RI and EI Mode Only)
  106
  - Qinq Settings
    108
  - VLAN Translation Settings
    109
- Layer 2 Protocol Tunneling Settings
  109
- Spanning Tree
  110
  - STP Bridge Global Settings
    112
  - STP Port Settings
    113
  - MST Configuration Identification
    115
  - STP Instance Settings
    116
  - MSTP Port Information
    116
- Link Aggregation
  117
  - Port Trunking Settings
    118
  - LACP Port Settings
    119
- Fdb
  120
  - Static FDB Settings
    120
  - MAC Notification Settings
    121
  - MAC Address Aging Time Settings
    122
  - MAC Address Table
    123
  - ARP & FDB Table
    124
- L2 Multicast Control
  125
  - IGMP Proxy (RI Mode Only)
    125
  - IGMP Snooping
    126
    
    Igmp Snooping Settings
    127
    
    Igmp Snooping Rate Limit Settings
    130
    
    Igmp Snooping Static Group Settings
    130
    
    Igmp Router Port
    131
    
    Igmp Snooping Group
    132
    
    Igmp Snooping Forwarding Table
    133
    
    Igmp Snooping Counter
    133
    
    Cpu Filter L3 Control Packet Settings
    134
  - MLD Proxy (RI Mode Only)
    135
  - MLD Snooping
    137
    
    Mld Snooping Settings
    138
    
    Mld Snooping Rate Limit Settings
    140
    
    Mld Snooping Static Group Settings
    141
    
    Mld Router Port
    142
    
    Mld Snooping Group
    143
    
    Mld Snooping Forwarding Table
    143
    
    Mld Snooping Counter
    144
  - Multicast VLAN
    145
    
    Igmp Snooping Multicast Vlan Settings
    146
    
    Mld Multicast Group Profile Settings
    149
    
    Mld Snooping Multicast Vlan Settings
    149
- Multicast Filtering
  152
  - Ipv4 Multicast Filtering
    152
    
    Ipv4 Limited Multicast Range Settings
    153
    
    Ipv4 Max Multicast Group Settings
    153
  - Ipv6 Multicast Filtering
    154
  - Ipv6 Limited Multicast Range Settings
    155
  - Multicast Filtering Mode
    156
- ERPS Settings (RI and EI Mode Only)
  157
- Lldp
  160
  - Lldp Port Settings
    161
  - Lldp Basic Tlvs Settings
    163
  - Lldp Management Address List
    163
  - Lldp Dot1 Tlvs Settings
    164
  - Lldp Dot3 Tlvs Settings
    165
  - Lldp Statistic System
    166
  - Lldp Local Port Information
    167
  - Lldp Remote Port Information
    168
  - Lldp-Med
    169
- NLB FDB Settings
  172
Chapter 5 L3 Features

173
- Ipv4 Default Route Settings (si Mode Only)
  173
- Ipv4 Static/Default Route Settings (RI and EI Mode Only)
  174
- Ipv4 Route Table
  175
- Ipv6 Default Route Settings (si Mode Only)
  176
- Ipv6 Static/Default Route Settings (RI and EI Mode Only)
  176
- Ipv6 Route Table
  177
- Policy Route Settings (RI Mode Only)
  178
- IP Forwarding Table
  180
- IP Multicast Forwarding Table (RI Mode Only)
  181
- IP Multicast Interface Table (RI Mode Only)
  181
- Static Multicast Route Settings (RI Mode Only)
  182
- Route Preference Settings (RI Mode Only)
  182
- ECMP Algorithm Settings (RI Mode Only)
  183
- Route Redistribution (RI Mode Only)
  184
  - Route Redistribution Settings
    184
  - Ipv6 Route Redistribution Settings
    184
- IP Tunnel (RI Mode Only)
  185
  - IP Tunnel Settings
    185
  - IP Tunnel GRE Settings
    186
- OSPF (RI Mode Only)
  187
  - Ospfv2
    207
    
    Ospf Interface Settings
    208
    
    Ospf Virtual Link Settings
    210
    
    Ospf Area Aggregation Settings
    211
    
    Ospf Host Route Settings
    212
    
    Ospf Lsdb Table
    213
    
    Ospf Neighbor Table
    214
  - Ospfv3
    215
  - Ospfv3 Neighbor Table
    225
- RIP (RI Mode Only)
  226
  - RIP Settings
    228
  - Ripng
    229
  - Ripng Interface Settings
    230
- IP Multicast Routing Protocol (RI Mode Only)
  231
  - Igmp
    231
  - Igmp Group Table
    233
  - Mld
    234
  - Dvmrp
    237
    
    Dvmrp Routing Table
    238
    
    Dvmrp Neighbor Table
    238
    
    Dvmrp Routing Next Hop Table
    238
  - Pim
    239
    
    Pim Global Settings
    241
    
    Pim Interface Settings
    242
    
    Pim Candidate Bsr Settings
    242
    
    Pim Candidate Rp Settings
    243
    
    Pim Static Rp Settings
    244
    
    Pim Register Checksum Settings
    245
    
    Pim Neighbor Table
    245
- VRRP (RI Mode Only)
  257
  - VRRP Global Settings
    257
  - VRRP Virtual Router Settings
    258
  - VRRP Authentication Settings
    259
- IP Route Filter (RI Mode Only)
  260
  - IP Standard Access List Settings
    260
  - Route Map Settings
    261
- MD5 Settings (RI Mode Only)
  263
- IGMP Static Group Settings (RI Mode Only)
  264

D-Link xStack DGS-3120 Series Product Manual (339 pages)

Product Manual

Brand: D-Link | Category: Switch | Size: 15.12 MB

Table of Contents
3
Intended Readers
9
Typographical Conventions
9
Notes, Notices and Cautions
9
Chapter 1 Web-Based Switch Configuration

10
- Introduction
  10
- Login to the Web Manager
  10
- Web-Based User Interface
  10
  - Areas of the User Interface
    11
- Web Pages
  12
Chapter 2 System Configuration

13
- Device Information
  13
- System Information Settings
  14
- Port Configuration
  15
  - Port Settings
    15
  - Port Description Settings
    16
  - Port Error Disabled
    17
  - Jumbo Frame Settings
    17
- Poe
  18
  - Poe System Settings
    18
  - Poe Port Settings
    19
- Serial Port Settings
  21
- Warning Temperature Settings
  21
- System Log Configuration
  22
  - System Log Settings
    22
  - System Log Server Settings
    23
  - System Log
    24
  - System Log & Trap Settings
    24
  - System Severity Settings
    25
- Time Range Settings
  26
- Port Group Settings (EI Mode Only)
  26
- Time Settings
  27
- User Accounts Settings
  27
- Command Logging Settings
  29
- Stacking
  29
  - Stacking Device Table
    31
  - Stacking Mode Settings
    31
Chapter 3 Management

33
- Arp
  33
  - Static ARP Settings
    33
  - Proxy ARP Settings (EI Mode Only)
    34
  - ARP Table
    34
- Gratuitous ARP
  35
  - Gratuitous ARP Global Settings
    35
  - Gratuitous ARP Settings
    35
- Ipv6 Neighbor Settings (EI Mode Only)
  36
- IP Interface
  37
  - System IP Address Settings
    37
  - Interface Settings
    38
- Management Settings
  41
- Session Table
  42
- Single IP Management
  43
  - Single IP Settings
    45
  - Topology
    45
  - Firmware Upgrade
    51
  - Configuration File Backup/Restore
    52
  - Upload Log File
    52
- SNMP Settings
  52
  - SNMP Global Settings
    53
  - SNMP Traps Settings
    54
  - SNMP Linkchange Traps Settings
    54
  - SNMP View Table Settings
    55
  - SNMP Community Table Settings
    56
  - SNMP Group Table Settings
    57
  - SNMP Engine ID Settings
    58
  - SNMP User Table Settings
    59
  - SNMP Host Table Settings
    60
  - Snmpv6 Host Table Settings (EI Mode Only)
    61
  - RMON Settings
    61
- Telnet Settings
  62
- Web Settings
  62
Chapter 4 L2 Features

63
- Vlan
  63
  - 802.1Q VLAN Settings
    68
  - 802.1V Protocol VLAN
    71
  - V Protocol Vlan Settings
    72
  - Asymmetric VLAN Settings
    73
  - Gvrp
    73
  - Gvrp Port Settings
    74
  - MAC-Based VLAN Settings
    75
  - Private VLAN Settings
    75
  - PVID Auto Assign Settings
    77
  - Voice VLAN
    77
    
    Voice Vlan Port Settings
    78
    
    Voice Vlan Oui Settings
    79
    
    Voice Vlan Device
    79
  - VLAN Trunk Settings
    80
  - Browse VLAN
    80
  - Show VLAN Ports
    81
- Qinq (EI Mode Only)
  81
  - Qinq Settings
    83
  - VLAN Translation Settings
    84
- Spanning Tree
  85
  - STP Bridge Global Settings
    86
  - STP Port Settings
    88
  - MST Configuration Identification
    89
  - STP Instance Settings
    90
  - MSTP Port Information
    91
- Link Aggregation
  91
  - Port Trunking Settings
    93
  - LACP Port Settings
    93
- Fdb
  95
  - Static FDB Settings
    95
  - MAC Notification Settings
    96
  - MAC Address Aging Time Settings
    97
  - MAC Address Table
    98
  - ARP & FDB Table
    98
- L2 Multicast Control
  99
  - IGMP Snooping
    99
    
    Igmp Snooping Rate Limit Settings
    102
    
    Igmp Snooping Static Group Settings
    103
    
    Igmp Router Port
    104
    
    Igmp Snooping Group
    104
    
    Igmp Snooping Forwarding Table
    105
    
    Igmp Snooping Counter
    106
  - MLD Snooping
    107
    
    Mld Snooping Settings
    108
    
    Mld Snooping Rate Limit Settings
    110
    
    Mld Snooping Static Group Settings
    110
    
    Mld Router Port
    111
    
    Mld Snooping Group
    112
    
    Mld Snooping Forwarding Table
    113
    
    Mld Snooping Counter
    113
  - Multicast VLAN
    114
    
    Igmp Multicast Group Profile Settings
    115
    
    Igmp Snooping Multicast Vlan Settings
    116
    
    Mld Multicast Group Profile Settings
    118
    
    Mld Snooping Multicast Vlan Settings
    119
- Multicast Filtering
  121
  - Ipv4 Multicast Filtering
    121
    
    Ipv4 Limited Multicast Range Settings
    122
    
    Ipv4 Max Multicast Group Settings
    123
  - Ipv6 Multicast Filtering
    124
  - Ipv6 Limited Multicast Range Settings
    125
  - Multicast Filtering Mode
    126
- ERPS Settings (EI Mode Only)
  127
- Lldp
  131
  - LLDP Global Settings
    131
  - LLDP Port Settings
    132
  - LLDP Management Address List
    133
  - LLDP Basic Tlvs Settings
    133
  - LLDP Dot1 Tlvs Settings
    134
  - LLDP Dot3 Tlvs Settings
    135
  - LLDP Statistic System
    136
  - LLDP Local Port Information
    137
  - LLDP Remote Port Information
    138
- NLB FDB Settings
  139
Chapter 5 L3 Features

140

D-Link xStack DGS-3120 Series Hardware Installation Manual (71 pages)

XStack DGS-3120 Series Layer 3 Managed Gigabit Switch

Brand: D-Link | Category: Switch | Size: 2.81 MB

Table of Contents
3
Intended Readers
5
Typographical Conventions
5
Notes, Notices, and Cautions
5
Safety Instructions
6
- Safety Cautions
  6
General Precautions for Rack-Mountable Products
7
Protecting against Electrostatic Discharge
8
Chapter 1 Introduction

9
- Switch Description
  9
- Features
  10
- Ports
  12
- Front Panel Components
  13
  - LED Indicators
    14
- Rear Panel Description
  17
- Side Panel Description
  18
Chapter 2 Installation

19
- Package Contents
  19
- Installation Guidelines
  19
- Power on (AC Power)
  21
  - Power Failure (AC Power)
    21
- Connecting DC Power to the DGS-3120-24SC-DC
  22
- Installing SFP Ports
  23
- Connecting to a Redundant Power Supply
  24
- Installing the RPS into a Rack-Mount Chassis
  25
  - Dps-700
    25
  - Dps-800
    26
  - Dps-900
    27
Chapter 3 Connecting the Switch

29
Chapter 4 Introduction to Switch Management

32
- Management Options
  32
- Connecting the Console Port
  32
- First Time Connecting to the Switch
  34
- Password Protection
  34
- IP Address Assignment
  35
- SNMP Settings
  35
  - Traps
    36
  - Mibs
    36
  - Management Information Base
    36
Chapter 5 Web-Based Switch Configuration

37
- Introduction
  37
- Logging Onto the Web Manager
  37
- Web-Based User Interface
  38
  - Areas of the User Interface
    38
- Web Pages
  39

D-Link xStack DGS-3120 Series How To Set Up (2 pages)

Stack on Switch

Brand: D-Link | Category: Switch | Size: 0.32 MB

D-Link Categories

Network Router

Switch Wireless Router Adapter

Security Camera

More D-Link Manuals

D-Link xStack DGS-3120 Series Manuals

D-Link xStack DGS-3120 Series Cli Reference Manual (1150 pages)

Table of Contents

Chapter 1 Using Command Line Interface

Chapter 2 Basic Command List

Chapter 3 802.1Q VLAN Command List

Chapter 4 802.1X Command List

Chapter 5 Access Authentication Control Command List

Chapter 6 Access Control List (ACL) Command List

Chapter 7 Access Control List (ACL) Egress Command List (RI and EI Mode Only)

Chapter 8 Address Resolution Protocol (ARP) Command List

Chapter 9 ARP Spoofing Prevention Command List

Chapter 10 Asymmetric VLAN Command List

Chapter 11 Auto-Configuration Command List

Chapter 12 Basic Commands Command List

Chapter 13 BPDU Attack Protection Command List

Chapter 14 Cable Diagnostics Command List

Chapter 15 Command Logging Command List

Chapter 16 Compound Authentication Command List

Chapter 17 Configuration Command List

Chapter 18 Configuration Trap Command List

Chapter 19 Connectivity Fault Management (CFM) Command List (RI and EI Mode Only)

Chapter 20 Connectivity Fault Management (CFM) Extension Command List (RI and EI Mode Only)

Chapter 21 CPU Interface Filtering Command List

Chapter 22 Debug Software Command List

Chapter 23 Denial-Of-Service (Dos) Attack Prevention Command List

Chapter 24 DHCP Local Relay Command List

Chapter 25 DHCP Relay Command List

Chapter 26 DHCP Server Command List (RI Mode Only)

Chapter 27 DHCP Server Screening Command List

Chapter 28 Dhcpv6 Relay Command List

Chapter 29 Digital Diagnostic Monitoring (DDM) Command List (RI and EI Mode Only)

Chapter 30 Distance Vector Multicast Routing Protocol (DVMRP) Command List (RI Mode Only)

Chapter 31 Domain Name System (DNS) Resolver Command List

Chapter 32 D-Link License Management System (DLMS) Command List

Chapter 33 D-Link Unidirectional Link Detection (DULD) Command List (RI and EI Mode Only)

Chapter 34 Energy Efficient Ethernet (EEE) Command List

Chapter 35 Ethernet Ring Protection Switching (ERPS) Command List (RI and EI Mode Only)

Chapter 36 FDB Command List

Chapter 37 Filter Command List

Chapter 38 Flash File System (FFS) Command List

Chapter 39 Gratuitous ARP Command List

Chapter 40 Internet Group Management Protocol (IGMP) Command List (RI Mode Only)

Chapter 41 IGMP Proxy Command List (RI Mode Only)

Chapter 42 IGMP Snooping Command List

Chapter 43 IP-MAC-Port Binding (IMPB) Command List (RI and EI Mode Only)

Chapter 44 IP Multicast (IPMC) Command List (RI Mode Only)

Chapter 45 IP Route Filter Command List (RI Mode Only)

Chapter 46 IP Tunnel Command List (RI Mode Only)

Chapter 47 Ipv6 Neighbor Discover Command List

Chapter 48 Ipv6 Route Command List

Chapter 49 Japanese Web-Based Access Control (JWAC) Command List

Chapter 50 Jumbo Frame Command List

Chapter 51 Layer 2 Protocol Tunneling (L2PT) Command List

Chapter 52 Link Aggregation Command List

Chapter 53 Link Layer Discovery Protocol (LLDP) Command List

D-Link xStack DGS-3120 Series Manual (852 pages)

Table of Contents

Table of Contents

Chapter 1 Using Command Line Interface

Chapter 2 Basic Command List

Chapter 3 802.1Q VLAN Command List

Chapter 4 802.1X Command List

Chapter 5 Access Authentication Control Command List

Chapter 6 Access Control List (ACL) Command List

Chapter 7 Access Control List (Acl) Egress Command List (Ei Mode Only)

Chapter 8 Address Resolution Protocol (ARP) Command List

Chapter 9 ARP Spoofing Prevention Command List

Chapter 10 Asymmetric VLAN Command List

Chapter 11 Auto-Configuration Command List

Chapter 12 Basic Commands Command List

Chapter 13 BPDU Attack Protection Command List

Chapter 14 Cable Diagnostics Command List

Chapter 15 Command Logging Command List

Chapter 16 Compound Authentication Command List

Chapter 17 Configuration Command List

Chapter 18 Configuration Trap Command List

Chapter 19 Connectivity Fault Management (CFM) Command List (EI Mode Only)

Chapter 20 Connectivity Fault Management (CFM) Extension Command List (EI Mode Only)

Chapter 21 CPU Interface Filtering Command List