Show Ip Bgp Parameters - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
vpnv4 vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the networks advertised by BGP.
Example
This example shows how to display the networks advertised by BGP.
Switch# show ip bgp network
Network Address
--------------------------
20.0.0.0/24
Total Network Number:
Switch# show ip bgp vpnv4 vrf VPN-A network
Network Address
-------------------------------------
20.0.0.0/8
Total Network Number:
Switch#
10-89

show ip bgp parameters

This command is used to display the parameters of BGP.
show ip bgp parameters
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
specified, all IP addresses will be displayed.
(Optional) Specifies a VRF name. The length of the VRF name is 12
characters.
Route Map
-
1
VRF-Name Route Map
VPN-A -
1
228