Show Ip Bgp Neighbors - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
show ip bgp vpnv4 {all | rd RD-VALUE | vrf VRF-NAME} labels
Parameters
all
rd RD-VALUE
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the BGP private labels of the routes.
Example
This example shows how to display the BGP private labels of the routes that match the RD 1:1.
Switch# show ip bgp rd 1:1 labels
BGP table version is 1738, BGP Local Router ID is 11.11.11.11
Status codes:s suppressed,d damped,h history,* valid,> best,i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
Route Distinguisher: 1:1 (default for VRF my)
*> 88.1.2.0/24
*> 88.1.5.0/24
*> 89.1.1.0/24
*> 89.1.2.0/24
*> 99.1.1.0/24
Route Distinguisher: 1:1 (VPN route(s))
*> 89.1.1.0/24
*> 89.1.2.0/24
Switch#
10-87

show ip bgp neighbors

This command is used to display information about the TCP and Border Gateway Protocol (BGP)
connections to neighbors.
Specifies to display all the VPNv4 routes labels.
Specifies to display the VPNv4 routes labels that match the specified
RD.
Specifies to display the VPNv4 routes labels associated with the VRF.
From In Label/Out Label
100.1.1.2 1000/no
100.1.1.2 1000/no
10.1.1.3 no/16
10.1.1.3 no/17
Self Peer 1000/no
10.1.1.3 no/16
10.1.1.3 no/17
224