D-Link DXS-3600 Series Reference Manual page 732

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all configurations and information of the multicast VLAN by not specifying
the VLAN ID.
Example
This example shows how to display all multicast VLAN configurations and information on the switch.
Switch# show mvlan
IPv4 Multicast VLAN State
IPv6 Multicast VLAN State
Forward Unmatched: Disabled
Ignore VLAN : Enabled
MVLAN 100
Untagged Receiver
Tagged Receiver
Untagged Source
Tagged Source
Replace Source IP
Replace priority
MVLAN 200
Untagged Receiver
Tagged Receiver
Untagged Source
Tagged Source
Replace Source IP
Replace priority
Total Entries: 2
Switch#
Display Parameters
IPv4 Multicast VLAN State
IPv6 Multicast VLAN State
Forward Unmatched
Auto Assign VLAN
Untagged/Tagged
Receiver/Source
: Enabled
: Disabled
: eth1/0/15
: eth1/0/1-4
: eth1/0/18
:
: 0.0.0.0 (from source)/FE80::32 (from receiver)
: 4
: eth2/0/1-5
:
:
: eth1/0/10
: 1.0.0.1 (from both)/Not replace
: Not replace
The state of the multicast VLAN function to process IPv4 packet. It can
be Disabled or Enabled.
The state of the multicast VLAN function to process IPv6 packets. It
can be Disabled or Enabled.
The forwarding mode for Multicast VLAN unmatched packets. Enabled
means forward, and Disabled means not forward.
Automatically assign the IGMP control packets to the right multicast
VLAN.
The receiver/source ports configured in the multicast VLAN and the
VLAN tagged or untagged attribute for multicast packets forwarded
towards them.
732