D-Link DXS-3600 Series Reference Manual page 477

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the Ethernet ring G.8032 command to create or modify a G.8032 ring and enter the ERP
configuration mode. The ring created by the command represents a physical ring.
Example
This example shows how to create a G.8032 ring named major-ring.
Switch# configure terminal
Switch(config)# ethernet ring g8032 major-ring
Switch(config-erp)#
37-3 ethernet ring g8032 profile
This command is used to create a G.8032 profile and enter the G.8032 profile configuration mode. Use
the no form of this command to delete a G.8032 profile.
ethernet ring g8032 profile PROFILE-NAME
no ethernet ring g8032 profile PROFILE-NAME
Parameters
PROFILE-NAME
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to create or modify a G.8032 profile and enter the G.8032 profile configuration mode.
Example
This example shows how to create a G.8032 profile named "campus".
Switch# configure terminal
Switch(config)# ethernet ring g8032 profile campus
Switch(config-g8032–ring-profile)# timer guard 700 hold-off 1 wtr 1
Switch(config-g8032–ring-profile)#
Specifies the name of the G.8032 profile with a maximum of 32
characters.
477