D-Link DXS-3600 Series Reference Manual page 844

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch# debug ip ospf lsa-originating
Switch#
Build Router LSA id 100.1.1.2 for area 0.0.0.0 seq 80000001 tic 10
71-43 debug ip ospf lsa-flooding
This command is used to turn on the OSPF LSA flooding debug switch. Use the no form of the command
to turn off the OSPF LSA flooding debug switch.
debug ip ospf lsa-flooding
no debug ip ospf lsa-flooding
Parameters
None.
Default
By default the OSPF LSA flooding debug switch is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the OSPF LSA flooding debug switch. When the LSA is received,
added into local database, or flooded to neighboring router, the debug information will print if the OSPF
debug function is turned on.
Example
This example shows how to turn on the OSPF LSA flooding debug switch.
Switch# debug ip ospf lsa-flooding
Switch#
Received LSA type 1 id 2.2.2.2 from nbr 2.2.2.2 in area 0.0.0.0 seq 80000001 csum fe3a
tic 15
Flood LSAs in area 0.0.0.0 tic 15
71-44 debug ip ospf packet-receiving
This command is used to turn on the OSPF packet receiving debug switch. Use the no form of the
command to turn off the OSPF packet receiving debug switch.
debug ip ospf packet-receiving
no debug ip ospf packet-receiving
Parameters
844