Page 2: Table Of Contents
Table of Contents Table of Contents DXS/DWS-3227/3227P, DXS/DWS-3250 User Guide Overview ............ 7 Intended Audience........................... 8 Device Description ........................9 Viewing the Device .......................... 9 DXS-3250/DWS Front Panel ........................9 DXS/DWS-3227 Front Panel ........................10 DXS/DWS-3227P Front Panel.........................10 Back Panels.............................11 Ports Description ........................... 12 1000Base-T Gigabit Ethernet Ports......................12 10G XFP Fiber port..........................12 Optional Modules.............................12...
Page 3 Starting the D-Link Embedded Web Interface................52 Understanding the D-Link Embedded Web Interface..............54 Device Representation..........................55 Using the D-Link Embedded Web Interface Management Buttons ............56 Using Screen and Table Options ....................57 Adding Configuration Information ......................57 Modifying Configuration Information ....................... 57 Deleting Configuration Information ......................
Page 4 Table of Contents Configuring Device Security....................77 Configuring Management Security ....................78 Configuring Authentication Methods......................78 Configuring Passwords..........................95 Configuring Network Security ......................99 Network Security Overview........................99 Defining Network Authentication Properties ..................101 Defining Port Authentication ........................103 Configuring Traffic Control........................108 Defining DOS Protection Security ....................113 Configuring Ports ........................
Page 5 DXS/DSW 3200 Series User Guide Viewing WLAN Stations ........................169 Configuring IP Information ....................171 Configuring IP Interfaces......................171 Defining IP Addresses .......................... 172 Defining Default Gateways ........................174 Configuring DHCP ..........................175 Configuring ARP ........................... 177 Configuring Domain Name Servers .................... 179 Defining DNS Servers...........................
Page 6 Table of Contents Configuring Quality of Service .................... 237 Quality of Service Overview ......................238 VPT Classification Information.......................238 CoS Services ............................238 Defining General QoS Settings ....................238 Configuring QoS General Settings ......................238 Restoring Factory Default QoS Interface Settings.................241 Configure Bandwidth Settings .......................241 Defining Queues ............................243 Configuring QoS Mapping ......................244 Mapping CoS Values to Queues ......................244...
Page 7 Appendix A, WLAN Country Settings ..................317 Appendix B, Device Specifications & Features ................ 325 Appendix B, Troubleshooting ....................333 Problem Management......................... 334 Troubleshooting Solutions......................334 Contacting D-Link Technical Support..................337 Warranty............................365 Product Registration........................369 International Offices ........................371 Page 6...
Page 8: Dxs/Dws-3227/3227P, Dxs/Dws-3250 User Guide Overview
Intended Audience DXS/DWS-3227/3227P, DXS/DWS-3250 User Guide Overview This section provides an overview to the D-Link Web System Interface User Guide. The D-Link Web System Inter- face User Guide provides the following sections: • Section 1, Device Description — Provides a system description including the hardware components.
Page 9: Intended Audience
DXS/DWS 3200 Series User Guide • Section 18, Configuring Quality of Service — Provides information about configuring Quality of Service on the device. • Section 19, Managing System Files — Provides information about downloading, uploading, and copying system files. • Section 20, Managing System Logs —...
Page 10: Device Description
DXS-3250/DWS Front Panel The D-Link DXS/DWS-3250 is a 48 port Gigabit Ethernet Managed Switch. The device contains 48 gigabit net- work ports and 4 SFP Ports on the front panel for network connectivity, and 2 stacking ports on the back panel.
Page 11: Dxs/Dws-3227 Front Panel
DXS/DWS-3227 Front Panel The D-Link DXS-3227 is a 24 port Gigabit Ethernet Managed Switch. The device contains 24 gigabit network ports, 4 SFP ports and 1XFP 10G port on the front panel for network connectivity, and 2 optional stacking or uplink module bays on the back panel.
Page 12: Back Panels
Device Description Viewing the Device The following figure illustrates the DXS-3227 front panel: Figure 3: DXS/DWS-3227P Front Panel The device front panel is configured as follows: • 24 Gigabit Ethernet ports — RJ-45 ports designated as 10/100/1000Base-T . The RJ-45 ports are desig- nated as ports Ports 1-24.
Page 13: Ports Description
DXS/DWS 3200 Series User Guide Figure 5: DXS/DWS-3227P Back Panel The DXS-3200 series back panel is configured as follows: • Reset Button — Resets the device. The Reset button does not extend beyond the device’s front panel sur- face. This it to avoid accidental device resetting. •...
Page 14: Sfp Ports
An optional 10Gigabit fiber port that can be inserted to the modules bays located on the back panel. The following figure describes the DEM - 411X module used for a fiber port: Transceivers can be purchased sepa- rately from D-Link. Figure 7:...
Page 15: Rs-232 Console Port
DXS/DWS 3200 Series User Guide Figure 8: Inserting an SFP into the Device RS-232 Console Port The RS-232 port is an asynchronous serial console port supporting the RS-232 electrical specification. The port is used to connect the device to a console managing the device. This interface configuration is as follows: •...
Page 16 Device Description Ports Description Figure 9: Stacking Kit (Optional) Figure 10: Inserting a Module Into a Device To insert a module into a device: Release bay cover bolts. Remove bay cover. Carefully Insert module into its proper slot. Ensure that the module is inserted correctly. Secure module bolts.
Page 17: Cable Specifications
Multi-mode fiber module (550m) 1000BASE-LH Single-mode fiber module (40km) 1000BASE-ZX Single-mode fiber module (80km) 10Gigabit - XFP Please refer to the D-Link Single/Multiple fiber XFP transceiver datasheet for DEM-421XT and DEM-422XT should there be any questions LED Definitions The device front panels contain Light Emitting Diodes (LED) that indicate the device status.The different LED types are as follows: •...
Page 18 Device Description LED Definitions Figure 10: DXS-3250 1000Base-T Gigabit Ethernet RJ-45 Port LEDs The DXS-3227 device has the LED indications on a LED panel on the left side of the device. The following figure illustrates the port LEDs: Figure 11: DXS-3227 1000Base-T Gigabit Ethernet RJ-45 Port LEDs The RJ-45 ports on both devices have two LEDs, one for speed, and one for Link /activity.
Page 19: Sfp Leds
DXS/DWS 3200 Series User Guide SFP LEDs The following figure illustrates the port LEDs. Figure 12: SFP LEDs The Fiber ports each have one LED. The LED indications are described in the following table: Table 3: SFP LED Indications LED I nd ic at io n D es cr i pt i on Green A link is established on the port.
Page 20 Device Description LED Definitions DXS/DWS-3227/3227P The sytstem LEDs are on the DXS/DWS-3227/3227P device in on the left side of the device. The following figure illustrates the DXS/DWS-3227/3227P system LEDs: Figure 14: DXS/DWS-3227/3227P LEDs The LED indications are described in the following table: Table 4: System’s LED Indications LED Des cription...
Page 21: Cable, Port, And Pinout Information
DXS/DWS 3200 Series User Guide Table 4: System’s LED Indications LED Des cription L ED Desc ription I nd i c a t i on Amber An error is occurred at this port There is no error at this port alternating Green An error is occurred at this port and Amber...
Page 22 Device Description Cable, Port, and Pinout Information Figure 16: CX-4 Pin Allocation The following table describes the pin allocation Table 6: CX-4 Port Pin Connections U se Rx 0+ Rx 0- Rx 1+ Rx 1- Rx 2+ Rx 2- Rx 3+ Rx 3- Tx 3- Tx 3+...
Page 23: Physical Dimensions
DXS/DWS 3200 Series User Guide Figure 17: DB-9 Pin Allocation The following table describes the pin allocation Table 7: DB-9 Port Pin Connections U se Physical Dimensions The device has the following physical dimensions: DXS/DWS - 3250 / DXS/DWS - 3227P •...
Page 24 Device Description Physical Dimensions This page is left blank intentionally. Page 23...
Page 25 DXS/DWS 3200 Series User Guide Page 24...
Page 26: Mounting Device
Mounting Device Preparing for Installation Section 2. Mounting Device This section contains information for installing the device, and includes the following sections: • Preparing for Installation • Installing the Device • Connecting the Device • Rack Installation Preparing for Installation This section provides an explanation for preparing the installation site, and includes the following topics: •...
Page 27: Site Requirements
Carefully remove the device from the container and place it on a secure and clean surface. Remove all packing material. Inspect the product for damage. Report any damage immediately. If any item is found missing or damaged, please contact your local D-Link reseller for replacement. Page 26...
Page 28: Installing The Device
Mounting Device Installing the Device Installing the Device The device can be installed on a flat surface or mounted in a rack. This section includes the following topics: • Desktop or Shelf Installation • Rack Installation Desktop or Shelf Installation When installing the switch on a desktop or shelf, the rubber feet included with the device should first be attached.
Page 29 DXS/DWS 3200 Series User Guide Notes • Disconnect all cables from the unit before mounting the device in a rack or cabinet. • When mounting multiple devices into a rack, mount the devices from the bottom up. To install the device in a rack, perform the following: Place the supplied rack-mounting bracket on one side of the device ensuring the mounting holes on the device line up to the mounting holes on the rack mounting bracket.
Page 30 Mounting Device Installing the Device Figure 20: Mounting Device in a Rack Secure the unit to the rack with the rack screws (not provided). Fasten the lower pair of screws before the upper pair of screws. This ensures that the weight of the unit is evenly distributed during installation. Ensure that the ventilation holes are not obstructed.
Page 31: Connecting The Device
DXS/DWS 3200 Series User Guide Connecting the Device This section describes how to connect the device, and includes the following sections: • Connecting the Switch to a Terminal • AC Power Connection Connecting the Switch to a Terminal The device is connected to a terminal through an console port on the front panel, which enables a connection to a terminal desktop system running terminal emulation software for monitoring and configuring the device.
Page 32: Initial Configuration
Initial Configuration General Configuration Information Section 3. Initial Configuration This section describes the initial device configuration and includes the following topics: • General Configuration Information • Booting the Switch • Configuration Overview • Advanced Configuration • Software Download and Reboot •...
Page 33: Device Port Default Settings
DXS/DWS 3200 Series User Guide Device Port Default Settings The following table describes the device port default settings:. Table 8: Device Port Default Settings Function Default Settings Port speed and mode 1000M Auto-negotiation Port forwarding state Enabled Head of line blocking On (Enabled) prevention Flow Control...
Page 34 Initial Configuration Booting the Switch As the switch boots, the bootup test first counts the device memory availability and then continues to boot. The fol- lowing screen is an example of the displayed POST. ------ Performing the Power-On Self Test (POST) ------ UART Channel Loopback Test......PASS Testing the System SDRAM......PASS Boot1 Checksum Test.......PASS...
Page 35: Configuration Overview
DXS/DWS 3200 Series User Guide Note The following screen is an example configuration.Items such as addresses, versions, and dates may differ for each device. Preparing to decompress... Decompressing SW from image-1 638000 Running from RAM... ********************************************************************* *** Running SW Ver. x.x.x.x Date 11-Jan-200x Time 15:43:13 *** ********************************************************************* HW version is Base Mac address is: 00:00:b0:24:11:80...
Page 36: Initial Configuration
Initial Configuration Configuration Overview After making any configuration changes, the new configuration must be saved before rebooting. To save the con- figuration, enter the following CLI command: copy running-config startup-config Console# Initial Configuration Initial configuration, which starts after the device has booted successfully, includes static IP address and subnet mask configuration, and setting user name and privilege level to allow remote management.
Page 37: User Name
DXS/DWS 3200 Series User Guide User Name A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified. Note Only the administrator (super-user) with the highest privilege level (15) is allowed to manage the device through the Web browser interface.
Page 38 Initial Configuration Configuration Overview The following screen displays the default device configuration: console# show snmp Community-String Community-Access View name IP address -------------------- ------------------ -------------- ------------ Community-String Group name IP address Type ------------------ ------------ ------------------- ------ Traps are enabled. Authentication-failure trap is enabled. Version 1,2 notifications Target Address Type...
Page 39: Advanced Configuration
DXS/DWS 3200 Series User Guide console# configure console(config)# snmp-server community priate rw 10.1.1.1 view bobi console(config)# exit console# show snmp Community-String Community-Access View name IP address -------------------- ------------------ -------------- ------------ priate read write bobi 10.1.1.1 private read write bobi 10.1.1.2 Community-String Group name IP address...
Page 40: Receiving An Ip Address From A Bootp Server
Initial Configuration Advanced Configuration The interface receives the IP address automatically. To verify the IP address, enter the show IP interface command at the system prompt as shown in the follow- ing example. show ip interface Console# Gateway IP Address Activity status Type --------...
Page 41: Security Management And Password Configuration
DXS/DWS 3200 Series User Guide The following example illustrates the process: enable Console> delete startup-config Console# Startup file was deleted reload Console# You haven’t saved your changes. Are you sure you want to continue (y/n)[n]? This command will reset the whole system and disconnect your current session.Do you want to continue (y/n)[n]? ****************************************************** /*the device reboots */...
Page 42: Configuring An Initial Telnet Password
Initial Configuration Advanced Configuration Configuring an Initial Telnet Password To configure an initial Telnet password, enter the following commands: aaa authentication login default line Console(config)# aaa authentication enable default line Console(config)# line telnet Console(config)# login authentication default Console(config-line)# enable authentication default Console(config-line)# password Console(config-line)#...
Page 43: Software Download And Reboot
DXS/DWS 3200 Series User Guide Software Download and Reboot Software Download through XModem This section contains instructions for downloading device software (system and boot images) using XModem, which is a data transfer protocol for updating back-up configuration files. To download a boot file using XModem: Enter the command “xmodem:boot”.
Page 44: Boot Image Download
Initial Configuration Software Download and Reboot Enter the command “copy tftp://{tftp address}/{file name}image” to copy a new system image to the device. When the new image is downloaded, it is saved in the area allocated for the other copy of system image (image-2, as given in the example).
Page 45: Configuring Stacking
DXS/DWS 3200 Series User Guide Enter the command “reload”. The following message is displayed: Console# reload This command will reset the whole system and disconnect your current session. Do you want to continue (y/n)[n]? Enter “Y” to reboot the switch. Configuring Stacking Configuring stacking is performed during the bootup process.
Page 46 Initial Configuration Configuring Stacking On the Startup Menu, press “6”. The following Stack Menu is displayed: Stack menu [1] Set unit number in stack [2] Change stacking ports [3] Stack info [4] Back Enter your choice or press 'ESC' to exit: To Set a unit number press “1”...
Page 47: Startup Menu Functions
DXS/DWS 3200 Series User Guide 16. From the Stack menu, press “4”. The Startup menu is displayed. 17. From the Startup menu, press “10”. The Startup menu is closed and the device continues the Startup process. Note Once the device is booted up and operational in the stack, the configuration can be modified through the Web or CLI.
Page 48: Erase Flash File
Initial Configuration Startup Menu Functions Erase FLASH File In some cases, the device configuration must be erased. If the configuration is erased, all parameters configured via CLI, Web browser interface, or SNMP must be reconfigured. To erase the device configuration: From the Startup menu, press “2”...
Page 49: Password Recovery
DXS/DWS 3200 Series User Guide Password Recovery If a password is lost, use the Password Recovery option on the Startup menu. The procedure enables the user to enter the device once without a password. To recover a lost password for the local terminal only: From the Startup menu, select “4 and press .
Page 50 Initial Configuration Startup Menu Functions The following Licence Menu is displayed: License menu Add license Remove license Show license Back Enter your choice or press 'ESC' to exit: From the License Menu, press “1”. The following prompt is displayed: Enter licence: Enter the licence key.
Page 51 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 50...
Page 52: Getting Started
Getting Started Section 4. Getting Started This section provides an introduction to the user interface, and includes the following topics: • Starting the D-Link Embedded Web Interface • Understanding the D-Link Embedded Web Interface • Using Screen and Table Options •...
Page 53: Starting The D-Link Embedded Web Interface
Notes • Disable the popup blocker before beginning device configuration using the EWS. This section contains information on starting the D-Link Embedded Web interface. To access the D-Link user interface: Open an Internet browser. Ensure that pop-up blockers are disabled. If pop-up blockers are enable, edit, add, and device information messages may not open.
Page 54 Starting the D-Link Embedded Web Interface Notes • The screen captures in this Guide represent the 48 port device. The Web pages in the 24 port device may vary slightly. Figure 22: D-Link Embedded Web Interface Home Page Page 53...
Page 55: Understanding The D-Link Embedded Web Interface
DXS/DWS 3200 Series User Guide Understanding the D-Link Embedded Web Interface The D-Link Embedded Web Interface Home Page contains the following views: • Port LED Indicators — Located at the top of the home page, the port LED indicators provide a visual repre- sentation of the ports on the D-Link front panel.
Page 56: Device Representation
EWS. This section provides the following additional information: • Device Representation — Provides an explanation of the D-Link user interface buttons, including both man- agement buttons and task icons. • Using the D-Link Embedded Web Interface Management Buttons — Provides instructions for adding, modifying, and deleting configuration parameters.
Page 57: Using The D-Link Embedded Web Interface Management Buttons
DXS/DWS 3200 Series User Guide Using the D-Link Embedded Web Interface Management Buttons Configuration Management buttons and icons provide an easy method of configuring device information, and include the following: Table 10: D-Link Web Interface Configuration Buttons Button Button Na me...
Page 58: Using Screen And Table Options
• Deleting Configuration Information Adding Configuration Information User-defined information can be added to specific D-Link Web Interface pages, by opening a new Add page. To add information to tables or D-Link Web Interface pages: Open an D-Link Web Interface page.
Page 59: Deleting Configuration Information
Modify the fields. Click . The fields are modified, and the information is saved to the device. Deleting Configuration Information Open The D-Link Embedded Web Interface page. Select a table row. Select the Remove checkbox. Click . The information is deleted, and the device is updated.
Page 60: Resetting The Device
Getting Started Resetting the Device Resetting the Device The Reset page enables resetting the device from a remote location. Note To prevent the current configuration from being lost, save all changes from the running configuration file to the startup configuration file before resetting the device. For instructions, see Copying Files. To reset the device: Click System >...
Page 61: Logging Off From The Device
DXS/DWS 3200 Series User Guide Logging Off from the Device Click . The Logout Page opens. Click . The D-Link Embedded Web Interface Home Page closes. Page 60...
Page 62: Managing Device Information
Managing Device Information Defining the System Description Section 5. Managing Device Information This section contains information for setting general system information, and includes the following sections: • Defining the System Description • Defining Advanced System Settings Defining the System Description The System Description Page contains parameters for configuring general device information, including the sys- tem name, location, and contact, the system MAC Address, System Object ID, System Up Time, and MAC addresses, and both software, boot, and hardware versions.
Page 63 DXS/DWS 3200 Series User Guide • System Object ID — Displays the vendor’s authoritative identification of the network management sub- system contained in the entity. • System Up Time — Displays the amount of time since the most recent device reset. The system time is dis- played in the following format: Days, Hours, Minutes, and Seconds.
Page 64: Defining Advanced System Settings
Managing Device Information Defining Advanced System Settings Defining Advanced System Settings The Mode Page allows network managers to enable Jumbo Frames on the device. Jumbo Frames enable the transportation of identical data in fewer frames. This ensures less overhead, lower processing time, and fewer interruptions.
Page 65 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 64...
Page 66: Managing Power Over Ethernet Devices
Managing Power over Ethernet Devices Section 6. Managing Power over Ethernet Devices Power over Ethernet (PoE) provides power to devices over existing LAN cabling, without updating or modifying the network infrastructure. Power over Ethernet removes the necessity of placing network devices next to power sources.
Page 67: Defining Poe System Information
DXS/DWS 3200 Series User Guide Defining PoE System Information The PoE Properties Page contains system PoE information for enabling PoE on the device, monitoring the current power usage, and enabling PoE traps.To enable PoE on the device: Click the System > Power over Ethernet > Properties tab. The PoE Properties Page opens: Figure 30: PoE Properties Page The PoE Properties Page contains the following fields: •...
Page 68 Managing Power over Ethernet Devices Defining PoE System Information Define the Unit No. and the System Usage Threshold field. Check the Traps checkbox. Click . The system PoE parameters are defined, and the device is updated. Page 67...
Page 69: Displaying And Editing Poe System Information
DXS/DWS 3200 Series User Guide Displaying and Editing PoE System Information The PoE Interface Page displays system PoE information on the device, monitoring the current power usage, and enabling PoE traps. To display system PoE information on the device: Click the System > Power over Ethernet > Interface tab. The PoE Interface Page opens: Figure 31: PoE Interface Page The PoE Interface Page contains the following fields: •...
Page 70 Managing Power over Ethernet Devices Displaying and Editing PoE System Information – Searching — Indicates that the device is currently searching for a powered device. Searching is the default PoE operational status. – Fault — Indicates that the device has detected a fault on the powered device. For example, the powered device memory could not be read.
Page 71 DXS/DWS 3200 Series User Guide • Invalid Signature Counter — Indicate the times an invalid signature was received. Signatures are the means by which the powered device identifies itself to the PSE. Signature are generated during powered device detection, classification, or maintenance. Modify the PoE Admin Status, Power Priority Level, and Powered Device fields.
Page 72: Managing Stacking
Managing Stacking Section 7. Managing Stacking Stacking provides multiple switch management through a single point as if all stack members are a single unit. All stack members are accessed through a single IP address through which the stack is managed. The stack is can be managed from the following: •...
Page 73: Understanding The Stack Topology
DXS/DWS 3200 Series User Guide Understanding the Stack Topology The 32XX series Stacked devices operate in a Ring topology. A stacked Ring topology is where all devices in the stack are connected to each other forming a circle. Each stacked device accepts data and sends it to the device to which it is physically connected.
Page 74: Removing And Replacing Stacking Members
Managing Stacking Stacking Failover Topology Notes • If two members are discovered with the same Unit ID the stack continues to function, however only the unit with the older join time joins the stack. A message is sent to the user, notifying that a unit failed to join the stack.
Page 75: Exchanging Stacking Members
DXS/DWS 3200 Series User Guide • Units toggle between Stacking Mode and Stand-alone Mode Each time the system reboots, the Startup Configuration file in the Master unit is used to configure the stack. If a stack member is removed from the stack, and then replaced with a unit with the same Unit ID, the stack member is configured with the original device configuration.
Page 76: Configuring Stacking
Managing Stacking Configuring Stacking Configuring Stacking The Stack Page allows network managers to either reset the entire stack or a specific device. Device configuration changes that are not saved before the device is reset are not saved. If the Stacking Mas- ter is reset, the entire stack is reset.
Page 77 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 76...
Page 78: Configuring Device Security
Configuring Device Security Section 8. Configuring Device Security This section provides access to security pages that contain fields for setting security parameters for ports, device management methods, users, and server security. This section contains the following topics: • Configuring Management Security •...
Page 79: Configuring Management Security
DXS/DWS 3200 Series User Guide Configuring Management Security This section provides information for configuring device management security. This section includes the following topics: • Configuring Authentication Methods • Configuring Passwords Configuring Authentication Methods This section provides information for configuring device authentication methods. This section includes the topics: •...
Page 80: Defining Access Profiles
Configuring Device Security Configuring Management Security Defining Access Profiles Access profiles are profiles and rules for accessing the device. Access to management functions can be limited to user groups. User groups are defined for interfaces according to IP addresses or IP subnets. Access profiles con- tain management methods for accessing and managing the device.
Page 81 DXS/DWS 3200 Series User Guide – Unchecked — Maintains the access profiles. Click . The Add Access Profile Page opens: Figure 36: Add Access Profile Page In addition to the fields in the Access Profile Page, the Add Access Profile Page contains the following fields: •...
Page 82 Configuring Device Security Configuring Management Security • Source IP Address — Defines the interface source IP address to which the access profile applies. The Source IP Address field is valid for a subnetwork. Define the Access Profile Name, Rule Priority, Management Method, Interface, Source IP Address, Network Mask or Prefix Length, and Action fields.
Page 83: Defining Profile Rules
DXS/DWS 3200 Series User Guide Defining Profile Rules Access profiles can contain up to 128 rules that determine which users can manage the switch module, and by which methods. Users can also be blocked from accessing the device. Rules are composed of filters including: •...
Page 84 Configuring Device Security Configuring Management Security – Telnet — Assigns Telnet access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. – Secure Telnet (SSH) — Assigns SSH access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device.
Page 85 DXS/DWS 3200 Series User Guide To modify a Profile Rule: Click System > Management Security > Authentication > Profile Rules. The Access Profile Page opens Click . The Profile Rules Setting Page opens: Modify the fields. Click . The profile rule is modified, and the device is updated. Page 84...
Page 86: Defining Authentication Profiles
Configuring Device Security Configuring Management Security Defining Authentication Profiles Authentication profiles allow network administrators to assign authentication methods for user authentication. User authentication can be performed either locally or on an external server. User authentication occurs in the order the methods are selected. If the first authentication method is not available, the next selected method is used.
Page 87 DXS/DWS 3200 Series User Guide Click . The Add Authentication Profile Page opens. Figure 40: Add Authentication Profile Page Define the Profile Method, Profile Name and Authentication Methods fields. Click . The authentication profile is defined, and the device is updated. To modify an authentication profile: Click System >...
Page 88: Mapping Authentication Methods
Configuring Device Security Configuring Management Security Mapping Authentication Methods After authentication profiles are defined, they can be applied to management access methods. For example, con- sole users can be authenticated by Authentication Profile List 1, while Telnet users are authenticated by Authenti- cation Method List 2.
Page 89 DXS/DWS 3200 Series User Guide – None — Indicates that no authentication method is used for access. – RADIUS — Indicates that authentication occurs at the RADIUS server. – TACACS+ — Indicates that authentication occurs at the TACACS+ – Local — Indicates that authentication occurs locally. •...
Page 90: Defining Radius Settings
Configuring Device Security Configuring Management Security Defining RADIUS Settings Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks. RADIUS servers provide a centralized authentication method for web access. The default parameters are user-defined, and are applied to newly defined RADIUS servers. If new default param- eters are not defined, the system default values are applied to newly defined RADIUS servers.
Page 91 DXS/DWS 3200 Series User Guide • Authentication Port — Identifies the authentication port. The authentication port is used to verify the RADIUS server authentication. The authenticated port default is 1812. • Number of Retries — Defines the number of transmitted requests sent to the RADIUS server before a failure occurs.
Page 92 Configuring Device Security Configuring Management Security To edit RADIUS Server Settings: Click System > Management Security > Authentication > Radius. The RADIUS Page opens. Click . The RADIUS Server Settings Page opens: Figure 44: RADIUS Server Settings Page Define the Host IP Address, Priority, Source IP Address, Key String, Number of Retries, Authentication Port, Timeout for Reply, Dead Time, and Usage Type fields.
Page 93 DXS/DWS 3200 Series User Guide Defining TACACS+ Authentication Terminal Access Controller Access Control System (TACACS+) provides centralized security user access valida- tion. The sytem supports up-to 4 TACACS+ servers. TACACS+ provides a centralized user management system, while still retaining consistency with RADIUS and other authentication processes.
Page 94 Configuring Device Security Configuring Management Security The TACACS+ Page also contains the following fields: • Host IP Address — Defines the TACACS+ Server IP address. • Priority — Defines the order in which the TACACS+ servers are used. The field range is 0-65535. The default is 0.
Page 95 DXS/DWS 3200 Series User Guide To edit a TACACS+ server settings: Click System > Management Security >Authentication > TACACS+. The TACACS+ Page opens. Select TACACS+ server entry. Click . The Add TACACS+ Host Page opens. Figure 47: TACACS+ Host Settings Page Define the fields.
Page 96: Configuring Passwords
Configuring Device Security Configuring Management Security Configuring Passwords This section contains information for defining device passwords, and includes the following topics. • Defining Local Users • Defining Line Passwords • Defining Enable Passwords Defining Local Users define users, passwords, and access levels for users using the Local User Network administrators can Page.
Page 97 DXS/DWS 3200 Series User Guide In addition to the fields in the Local User Page, the Add Local User Page contains the following fields: • User Name — Defines the user name. • Access Level — Define the user access level. The lowest user access level is 1 and the highest is 15. Users with access level 15 are Privileged Users.
Page 98: Defining Line Passwords
Configuring Device Security Configuring Management Security Defining Line Passwords Network administrators can define line passwords in the Line Password Page. After the line password is defined, a management method is assigned to the password. The device can be accessed using the following methods: •...
Page 99: Defining Enable Passwords
DXS/DWS 3200 Series User Guide Defining Enable Passwords The Enable Password Page sets a local password for a particular access level. To enable passwords: Click System > Management Security > Passwords > Enable Password. The Enable Password Page opens: Figure 52: Enable Password Page The Enable Password Page contains the following fields: •...
Page 100: Configuring Network Security
Configuring Device Security Configuring Network Security Configuring Network Security Network security manages both access control lists and locked ports. This section contains the following topics: • Network Security Overview • Defining Network Authentication Properties • Defining Port Authentication • Configuring Traffic Control Network Security Overview This section provides an overview of network security and contains the following topics: •...
Page 101 DXS/DWS 3200 Series User Guide ple, a network administrator can use Guest VLANs to deny network access via port-based authentication, but grant Internet access to unauthorized users. • Unauthenticated VLANS — Are available to users, even if the ports attached to the VLAN are defined as unauthorized.
Page 102: Defining Network Authentication Properties
Configuring Device Security Configuring Network Security Defining Network Authentication Properties The Network Authentication Properties Page allows network managers to configure network authentication parameters. In addition, Guest VLANs are enabled from the Network Authentication Properties Page. To define the network authentication properties: Click Advanced Setup >...
Page 103 DXS/DWS 3200 Series User Guide • VLAN List — Contains a list of VLANs. The Guest VLAN is selected from the VLAN list. Define the Port-based Authentication State, Authentication Method, Guest VLAN, and VLAN List fields. Click . The network authentication properties are set, and the device is updated. Page 102...
Page 104: Defining Port Authentication
Configuring Device Security Configuring Network Security Defining Port Authentication The Port Authentication Page allows network managers to configure port-based authentication global parameters. To define the port-based authentication global properties: Click Advanced Setup > Security Suite > Authentication > Port Authentication. The Port Authentication Page opens.
Page 105 DXS/DWS 3200 Series User Guide • Quiet Period — Defines the time (in seconds) after an authentication failure (for example, a wrong password) before the switch tries to authenticate the client again. The default value is 60 seconds. During this time the switch acts as defined in the 'Action on Violation' parameter (may forward, drop the packets from the client or shut down the port).
Page 106: Configuring Multiple Hosts
Configuring Device Security Configuring Network Security Configuring Multiple Hosts The Multiple Host Page allows network managers to configure advanced port-based authentication settings for specific ports and VLANs. For more information on advanced port-based authentication, see Advanced Port- Based Authentication. To define the network authentication global properties: Click Advanced Setup >...
Page 107 DXS/DWS 3200 Series User Guide • Status — Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The pos- sible field values are: – Unauthorized — Indicates that either the port control is Force Unauthorized and the port link is down, or the port control is Auto but a client has not been authenticated via the port.
Page 108: Defining Authentication Hosts
Configuring Device Security Configuring Network Security Defining Authentication Hosts The Authenticated Host Page contains a list of authenticated users. To define authenticated users: Click Advanced Setup > Security Suite > Authentication > Authenticated Host. The Authenticated Host Page opens: Figure 58: Authenticated Host Page The Authenticated Host Page contains the following fields: •...
Page 109: Configuring Traffic Control
DXS/DWS 3200 Series User Guide Configuring Traffic Control This section contains information for managing both port security and storm control, and includes the following topics: • Managing Port Security • Enabling Storm Control Page 108...
Page 110: Managing Port Security
MAC addresses. These addresses are either manually defined on the port, or learned on that port up to the point when it is locked. When a packet is received on a locked port, and the packet D-Link source MAC address is not tied to that port (either it was learned on a different port, or it is unknown to the system), the protec- tion mechanism is invoked, and can provide various options.
Page 111 DXS/DWS 3200 Series User Guide – Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port access. – Single-host Lock — Indicates that the port control is Auto and a single client has been authenticated via the port.
Page 112: Enabling Storm Control
Configuring Device Security Configuring Network Security Enabling Storm Control Storm control limits the amount of Multicast and Broadcast frames accepted and forwarded by the device. When Layer 2 frames are forwarded, Broadcast, and Multicast frames are flooded to all ports on the relevant VLAN. This occupies bandwidth, and loads all nodes on all ports.
Page 113 DXS/DWS 3200 Series User Guide – Unknown Unicast, Multicast & Broadcast — Counts Unicast, Multicast, and Broadcast traffic. – Multicast & Broadcast — Counts Broadcast and Multicast traffic together. – Broadcast Only — Counts only Broadcast traffic. • Broadcast Rate Threshold — Indicates the maximum rate (kilobits per second) at which unknown packets are forwarded.
Page 114: Defining Dos Protection Security
Configuring Device Security Defining DOS Protection Security Defining DOS Protection Security Denial of Service (DOS) protection provides Security Suite for DWS/DXS-3200 systems allows administrators to match, discard, and redirect packets based on packet header values. Packets which are redirected are analyzed for viruses and Trojans.
Page 115 DXS/DWS 3200 Series User Guide • Include Well Known Martian Addresses — Indicates that packets arriving from Martian addresses are dropped. When enabled, the following IP addresses are included: – 0.0.0.0/8 (except 0.0.0.0/32 ), 127.0.0.0/8 – 192.0.2.0/24 , 224.0.0.0/4 – 240.0.0.0/4 ( except 255.255.255.255/32) •...
Page 116: Configuring Ports
Configuring Ports Section 9. Configuring Ports The Interface Configuration Page contains fields for defining port parameters. To define port parameters: Click Basic Setup > Interface > Interface Configuration. The Interface Configuration Page opens. Figure 65: Interface Configuration Page The Interface Configuration Ports Table contains the following fields: •...
Page 117 DXS/DWS 3200 Series User Guide – 10000 — Indicates the port is currently operating at 10000 Mbps. • Duplex Mode — Displays the port duplex mode. This field is configurable only when auto negotiation is dis- abled, and the port speed is set to 10M or 100M. This field cannot be configured on LAGs. The possible field values are: –...
Page 118 Configuring Ports Modify the fields. Click . The parameters are saved, and the device is updated. Page 117...
Page 119: Viewing Port Properties
DXS/DWS 3200 Series User Guide Viewing Port Properties The Interface Properties Page contains fields for defining port parameters. To define port parameters: Click Basic Setup > Interface > Interface Properties. The Interface Properties Page opens: Figure 67: Interface Properties Page The Interface Properties Page is contains the following fields: •...
Page 120 Configuring Ports Viewing Port Properties Figure 68: Port Properties Page Define the Port and Description fields. Click . The interface properties are modified, and the device is updated. Page 119...
Page 121 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 120...
Page 122: Aggregating Ports
Aggregating Ports Section 10. Aggregating Ports Link Aggregation optimizes port usage by linking a group of ports together to form a single LAG. Aggregating ports multiplies the bandwidth between the devices, increases port flexibility, and provides link redundancy. The device supports both static LAGs and Link Aggregation Control Protocol (LACP) LAGs. LACP LAGs negotiate aggregating port links with other LACP ports located on a different device.
Page 123: Configuring Lacp
DXS/DWS 3200 Series User Guide Configuring LACP LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be set up manually or automatically established by enabling LACP on the relevant links. Aggregate ports can be linked into link-aggregation port-groups.
Page 124 Aggregating Ports Configuring LACP Figure 70: LACP Parameters Settings Page Edit the Port Priority and LACP Timeout fields. Click . The LACP settings are saved, and the device is updated Page 123...
Page 125: Defining Lag Members
DXS/DWS 3200 Series User Guide Defining LAG Members The LAG Membership Page contains fields for configuring parameters for configured LAGs. To define LAG parameters: Click Advanced Setup > Interface > LAG Membership. The LAG Membership Page opens. Figure 71: LAG Membership Page The LAG Membership Page contains the following fields: •...
Page 126: Configuring Vlans
Configuring VLANs Section 11. Configuring VLANs VLANs are logical subgroups with a Local Area Network (LAN) which combine user stations and network devices into a single unit, regardless of the physical LAN segment to which they are attached. VLANs allow network traffic to flow more efficiently within subgroups.
Page 127: Defining Vlan Properties
DXS/DWS 3200 Series User Guide Defining VLAN Properties The VLAN Properties Page provides information and global parameters for configuring and working with VLANs. To define VLAN properties: Click Basic Setup > VLAN > Membership > Properties. The VLAN Properties Page opens. Figure 72: VLAN Properties Page The VLAN Properties page contains the following fields: •...
Page 128 Configuring VLANs Defining VLAN Properties • Remove— Removes VLANs. The possible field values are: – Checked — Removes the selected VLAN. – Unchecked — Maintains VLANs. Click . The Add VLAN page opens: Figure 73: Add VLAN Page Define the VLAN ID and VLAN Name fields. Click .
Page 129: Defining Vlan Membership
DXS/DWS 3200 Series User Guide Defining VLAN Membership The VLAN Membership Page contains a table that maps VLAN parameters to ports. Ports are assigned VLAN membership by toggling through the Port Control settings. To define VLAN membership: Click Basic Setup > VLAN > Membership > Membership. The VLAN Membership Page opens. Figure 74: VLAN Membership Page The VLAN Membership Page contains the following fields: •...
Page 130 Configuring VLANs Defining VLAN Membership • Include (Green) — Includes the port in the VLAN. • Exclude (Red) — Excludes the interface from the VLAN. However, the interface can be added to the VLAN through GARP. • Forbidden (Purple) — Denies the interface VLAN membership, even if GARP indicates the port is to be added.
Page 131: Defining Vlan Interface Settings
DXS/DWS 3200 Series User Guide Defining VLAN Interface Settings The VLAN Interface Settings Page contains fields for managing ports that are part of a VLAN. The Port Default VLAN ID (PVID) is configured on the VLAN Interface Settings Page. All untagged packets arriving at the device are tagged with the port PVID.
Page 132 Configuring VLANs Defining VLAN Interface Settings – Admit All — Both tagged and untagged packets are accepted on the port. • Ingress Filtering— Indicates whether ingress filtering is enabled on the port. The possible field values are: – Enable — Enables ingress filtering on the device. Ingress filtering discards packets that are defined to VLANs of which the specific port is not a member.
Page 133: Configuring Garp
DXS/DWS 3200 Series User Guide Configuring GARP This section contains information for configuring Generic Attribute Registration Protocol (GARP). This section includes the following topics: • Defining GARP • Defining GVRP Defining GARP Generic Attribute Registration Protocol (GARP) protocol is a general-purpose protocol that registers any network connectivity or membership-style information.
Page 134 Configuring VLANs Configuring GARP • Join Timer— Indicates the amount of time, in centiseconds, that PDUs are transmitted. The default value is 20 centiseconds. • Leave Timer— Indicates the amount of time lapse, in centiseconds, that the device waits before leaving its GARP state.
Page 135: Defining Gvrp
DXS/DWS 3200 Series User Guide Defining GVRP GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to individually configure each bridge and register VLAN membership. To define GARP.
Page 136 Configuring VLANs Configuring GARP • Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on the interface. The possible field values are: – Enable — Enables Dynamic VLAN creation on the interface. – Disable — Disables Dynamic VLAN creation on the interface. •...
Page 137: Configuring Multicast Vlans
DXS/DWS 3200 Series User Guide Configuring Multicast VLANs Network Manager can enhance Multicast TV services by catapulting networking into the next generation of IT services by combining cable television, VoIP, and high speed inter-net connections via a single cable. Triple Play service ensure that Layer 2 isolation between subscribers remains intact.
Page 138: Defining Vlan Groups
Configuring VLANs Defining VLAN Groups Defining VLAN Groups VLAN groups increase network flexability and portability. For example, network users grouped by MAC address can log on to the network from multiple locations without moving between VLANs. VLANs can be grouped by MAC address, Subnets, and Protocols. Once a user logs on, the system attempts to classify the user by MAC address.
Page 139 DXS/DWS 3200 Series User Guide • Prefix – Defines the IP address’s prefix. The possible field range is 0-32. Click . The Add Protocol Group opens. Figure 82: Add Protocol Group Define the fields. Click . The Protocol based VLAN group is defined, and the device is updated. Page 138...
Page 140 Configuring VLANs Defining VLAN Groups Defining VLAN Protocol Ports The Protocol Group Page adds interfaces to Protocol groups. To define VLAN protocol ports: Click Advaned Setup > VLAN > Protocol Port. The VLAN Protocol Port Page opens. Figure 83: VLAN Protocol Port Page The VLAN Protocol Port Page contains the following fields: •...
Page 141 DXS/DWS 3200 Series User Guide Figure 84: VLAN Protocol Port Setting Page Define the fields. Click . The Protocol based VLAN port is defined, and the device is updated. Click . The Protocol Group Settings Page opens: Figure 85: Protocol Group Settings Page Define the fields.
Page 142: Defining Wlan
D-Link WLAN feature requires a licence key. The DWS series devices are preconfigured with a license for 10 access points, however, the DXS series devices require a license key. For more information about obtaining a APs or 25APs licences key, contact Sales Department for how to purchase a wireless license key.
Page 143: Defining Wlan System Properties
DXS/DWS 3200 Series User Guide Defining WLAN System Properties This section contains information for configuring and viewing general WLAN parameters, and includes the follow- ing topics: • Enabling WLAN • Defining WLAN Security • Viewing WLAN Rogues • Viewing WLAN Stations Enabling WLAN The WLAN Main Configuration Page provides information for starting and enabling WLAN.
Page 144: Defining Wlan Security
Defining WLAN Defining WLAN System Properties • Idle Station Timeout — Indicates the amount of time (minutes) that elapses before an idle station is timed out. Idle stations that are timed out must login to the system. The default value is 30 minutes. •...
Page 145 DXS/DWS 3200 Series User Guide • VLAN — Displays the VLAN mapped to the ESS. The default is VLAN 1. • QoS Mode — Indicates if QoS is enabled for the ESS. The possible field values are: – None — Indicates that QoS is not enabled for ESS. –...
Page 146 Defining WLAN Defining WLAN System Properties In addition to the field in the ESS Security Page, the Create ESS Configuration Page contains the following addi- tional fields: • Enable MAC Address Control — Indicates if MAC address filtering is enabled on the ESS. MAC address can be filtered when the MAC address attempts to access the ESS.
Page 147 DXS/DWS 3200 Series User Guide In addition to the field in the ESS Security Page, the ESS Settings Page contains the following additional fields: • Load Balancing — Indicates if load balancing type enabled for the wireless network. The possible field val- ues are: –...
Page 148: Viewing Wlan Rogues
Defining WLAN Defining WLAN System Properties Viewing WLAN Rogues Rogue AP is an unauthorized Access Point that presents potential security threat. When connected to a corporate network, the AP rogus, as a resulte of security breaches, may allow access to corporate network for unauthorized parties.
Page 149 DXS/DWS 3200 Series User Guide – Mitigate — Indicates that a disassociation instruction is sent for the SSID. – Known — Indicates that the SSID is already known to the system. • Remove — Removes detected rogue AP. The possible field values for: –...
Page 150: Viewing Wlan Stations
Defining WLAN Defining WLAN System Properties Viewing WLAN Stations The Monitor WLAN Stations Page provides information to network manager regarding the stations associated with the access point. To view the WLAN stations: Click WLAN > System >Stations. The Monitor WLAN Stations Page opens: Figure 91: Monitor WLAN Stations Page The Monitor WLAN Stations Page contains the following fields: •...
Page 151: Defining Wlan Access Points
DXS/DWS 3200 Series User Guide – Unchecked — Maintains the WLAN stations. Defining WLAN Access Points Access Points act as communication hubs for wireless networks. In additional, access points provide both encryp- tion and bridging between 802.11 and ethernet points. Access points also extend the physical size of wireless net- works.
Page 152: Defining Wlan Access Point Properties
Defining WLAN Defining WLAN Access Points Defining WLAN Access Point Properties The WLAN Access Point Properties Page displays information regarding the currently configured WLAN stations, including the SSID, the access point MAC address, the current access point status, and the discovery time. Ensure that the Wireless Controller Software (WCS) has been activated.
Page 153: Adding A New Access Point
DXS/DWS 3200 Series User Guide – Unchecked — Maintains the access points. • Remove — Removes access points. The possible field values are: – Checked — Removes the selected access point. – Unchecked — Maintains the current access points. Adding a New Access point Connect the AP to the switch.
Page 154: Configuring Wlan Vlans
Defining WLAN Defining WLAN Access Points Configuring WLAN VLANs The WLAN Access Point VLANs Page allows network mangers to configure VLANs from access points. The switch provides VLAN ID of the station. The AP VLAN ID is stored per station basis in the AP tags frames.To define WLAN VLANs: Click WLAN >...
Page 155: Configuring Wlan Template Settings
DXS/DWS 3200 Series User Guide Configuring WLAN Template Settings The WLAN Templates Page allows network managers to define WLAN templates. Templates contains the Basic Service Set parameters, and can be applied to access points. To define WLAN templates: Click WLAN > Access Points > Templates. The WLAN Templates Page opens: Figure 95: WLAN Template Page The WLAN Template Page contains the following fields: •...
Page 156 Defining WLAN Defining WLAN Access Points Figure 96: Create WLAN Template Page The Create WLAN Template Page contains the following fields: • Template Name — Defines the WLAN template name. Template names can contain up-to 32 characters. • Enable Wide Area Support — Enables using remote access points which are connect by Wide Area Net- works (WAN) or the internet.
Page 157: Configuring Wlan Radio Settings
DXS/DWS 3200 Series User Guide Configuring WLAN Radio Settings Access Points can have up-to two radio interfaces. However, each radio interface is configured and controlled separately. Radio interfaces inherit the common configuration parameters from the ESS configuration. This sec- tion contains information for defining WLAN Radio settings, and includes the following topics: •...
Page 158 Defining WLAN Configuring WLAN Radio Settings – Half — Defines half of the maximum power relative to the selected country’s device power regulations. – Quarter — Defines a quarter of the maximum power relative to the selected country’s device power regulations.
Page 159: Defining Bss Settings
DXS/DWS 3200 Series User Guide Defining BSS Settings The BSS Settings Page allows network managers to define Basic Service Sets (BSS). BSS are a set of stations that directly communicate with each other. The logical connection between the WLAN stations determines a set, not the station location.
Page 160 Defining WLAN Configuring WLAN Radio Settings – 1 — Indicates non-Unicast traffic is transferred at 1000 Kbps. – 2 — Indicates non-Unicast traffic is transferred at 2000 Kbps. – 5.5 — Indicates non-Unicast traffic is transferred at 5500 Kbps. – 6 —...
Page 161 DXS/DWS 3200 Series User Guide Figure 99: Create AP BSS Configuration Page Define the fields. Click . The AP BSS configuration is saved, and the device is updated. To modify BSS settings: Click WLAN > Configuration > Radio > BSS Settings. The BSS Settings Page opens. Click .
Page 162 Defining WLAN Configuring WLAN Radio Settings Figure 100:Edit BSS Settings Page In addition to the fields in the BSS Settings page, the Create BSS Settings page contains the following fields: • Enable SSID Advertisement — Indicates if SSID advertisement is enabled. •...
Page 163: Defining Wlan Power Settings
DXS/DWS 3200 Series User Guide Defining WLAN Power Settings The WLAN Radio Power Settings Page allows network managers to define WLAN radio power settings.To define WLAN radio power settings: Click WLAN > Radio > Power Settings. The WLAN Radio Power Settings Page opens: Figure 101:WLAN Radio Power Settings Page The WLAN Radio Power Settings Page contains the following fields: •...
Page 164 Defining WLAN Configuring WLAN Radio Settings – Unchecked — Disables the device Minimum Signal Loss default value. Define the fields. Click . The WLAN power settings are saved, and the device is updated. Page 163...
Page 165: Viewing Wlan Statistics
DXS/DWS 3200 Series User Guide Viewing WLAN Statistics This section contains information for viewing WLAN statistics, and includes the following topics: • Viewing Access Point Statistics • Viewing Radio Interfaces Statistics • Viewing BSS Statistics • Viewing WLAN Stations Viewing Access Point Statistics The WLAN Access Points Statistics Page contains information for viewing and monitoring the WLAN Access points.
Page 166 Defining WLAN Viewing WLAN Statistics • Management Sent Frames — Displays the number of management packets that were sent from the access point. • Received Unicast Packets — Displays the number of Unicast frames that were received on the access point.
Page 167: Viewing Radio Interfaces Statistics
DXS/DWS 3200 Series User Guide Viewing Radio Interfaces Statistics The WLAN Radio Interface Statistics Page contains information for helping network administrators to manage radio transmission statistics. To the open the WLAN Radio Interface Statistics Page: Click WLAN > Statistics > Radio Interface. The WLAN Radio Interface Statistics Page opens: Figure 103:WLAN Radio Interface Statistics Page The WLAN Radio Interface Statistics Page contains the following fields: •...
Page 168 Defining WLAN Viewing WLAN Statistics • Sent Bytes — Displays the amount of bytes sent from interface. • Data Packets Received — Displays the amount of management data packets received on the interface. • Data Packets Sent — Displays the amount of data packets sent from interface. •...
Page 169: Viewing Bss Statistics
DXS/DWS 3200 Series User Guide Viewing BSS Statistics The BSS Information Page allows network managers to monitor Basic Service Set activity. To view BSS statistics: Click WLAN > Monitor > BSS. The BSS Information Page opens: Figure 104: BSS Information Page The BSS Information Page contains the following fields: •...
Page 170: Viewing Wlan Stations
Defining WLAN Viewing WLAN Statistics Viewing WLAN Stations The WLAN Stations Statistics Page contains statistics regarding WLAN stations. To view WLAN station statistics: Click WLAN > Statistics >Stations. The WLAN Stations Statistics Page opens: Figure 105:WLAN Stations Statistics Page The WLAN Stations Statistics Page contains the following fields: •...
Page 171 DXS/DWS 3200 Series User Guide Page 170...
Page 172: Configuring Ip Information
Configuring IP Information Configuring IP Interfaces Section 13. Configuring IP Information This section provides information for defining device IP addresses, and includes the following topics: • Configuring IP Interfaces • Configuring Domain Name Servers Configuring IP Interfaces This section contains information for defining IP interfaces, and includes the following sections: •...
Page 173: Defining Ip Addresses
DXS/DWS 3200 Series User Guide Defining IP Addresses The IP Interface Page contains fields for assigning IP addresses. Packets are forwarded to the default IP when frames are sent to a remote network. The configured IP address must belong to the same IP address subnet of one of the IP interfaces.
Page 174 Configuring IP Information Configuring IP Interfaces Figure 107:Add IP Interface Page Define the Source IP Address, Network Mask or Prefix Length, and Interface fields. Click . The IP configuration fields are saved, and the device is updated. To modify an IP interface: Click Basic Setup >...
Page 175: Defining Default Gateways
DXS/DWS 3200 Series User Guide Defining Default Gateways Packets are forwarded to the default IP when frames are sent to a remote network via the default gateway. The configured IP address must belong to the same subnet of one of the IP interfaces. To define a default gateway: Click Basic Setup >...
Page 176: Configuring Dhcp
Configuring IP Information Configuring IP Interfaces Configuring DHCP The Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on a network. DHCP ensures that network devices can have a different IP address every time the device connects to the network. To define a DHCP Interface: Click Basic Setup >...
Page 177 DXS/DWS 3200 Series User Guide Figure 111: Add DHCP IP Interface Page Define the Interface and Host Name fields. Click . The DHCP interface is added, and the device is updated. Page 176...
Page 178: Configuring Arp
Configuring IP Information Configuring IP Interfaces Configuring ARP The Address Resolution Protocol (ARP) converts IP addresses into physical addresses, and maps the IP address to a MAC address. ARP allows a host to communicate with other hosts only when the IP address of its neighbors is known.
Page 179 DXS/DWS 3200 Series User Guide – VLAN — Indicates the VLAN for which ARP parameters are defined. • IP Address — Indicates the station IP address, which is associated with the MAC address filled in below. • MAC Address — Displays the station MAC address, which is associated in the ARP table with the IP address.
Page 180: Configuring Domain Name Servers
Configuring IP Information Configuring Domain Name Servers Configuring Domain Name Servers Domain Name System (DNS) converts user-defined domain names into IP addresses. Each time a domain name is assigned, the DNS service translates the name into a numeric IP address. For example, www.ipexample.com is translated into 192.87.56.2.
Page 181 DXS/DWS 3200 Series User Guide – Dynamic — The IP address is dynamically created. – Static — The IP address is a static IP address. • Remove — Removes DNS servers. The possible field values are: – Checked — Removes the selected DNS server –...
Page 182: Defining Dns Host Mapping
Configuring IP Information Configuring Domain Name Servers Defining DNS Host Mapping DNS Host Mapping Page provides information for defining DNS Host Mapping. To define DNS host map- ping: 1. Click Basic Setup > IP Configuration > Domain Name System > Host Mapping. The DNS Host Mapping Page opens: Figure 116: DNS Host Mapping Page DNS Host Mapping Page...
Page 183 DXS/DWS 3200 Series User Guide Figure 117: Add DNS Host Page Define the Host Name and IP Address fields. Click . The DNS host is added, and the device is updated. Page 182...
Page 184: Defining The Forwarding Database And Static Routes
Defining the Forwarding Database and Static Routes Section 14. Defining the Forwarding Database and Static Routes Packets addressed to destinations stored in either the Static or Dynamic databases are immediately forwarded to the port. The Dynamic MAC Address Table can be sorted by interface, VLAN, or MAC Address, whereas MAC addresses are dynamically learned as packets from sources that arrive at the device.
Page 185: Defining Static Forwarding Database Entries
DXS/DWS 3200 Series User Guide Defining Static Forwarding Database Entries The Forwarding Database Static Addresses Page contains parameters for defining the age interval on the device. To prevent static MAC addresses from being deleted when the device is reset, ensure that the port attached to the MAC address is locked.
Page 186 Defining the Forwarding Database and Static Routes Defining Static Forwarding Database Entries To add a new static forwarding database entry: Click Advanced Setup > Forwarding Database > Static Addresses. The Forwarding Database Static Addresses Page opens. Click . The Add Forwarding Database Page opens: Figure 119: Add Forwarding Database Page Define the Interface, MAC Address, VLAN ID or VLAN Name, and Status fields.
Page 187: Defining Dynamic Forwarding Database Entries
DXS/DWS 3200 Series User Guide Defining Dynamic Forwarding Database Entries The Dynamic Addresses Page contains parameters for querying information in the Dynamic MAC Address Table, including the interface type, MAC addresses, VLAN, and table storing. The Dynamic MAC Address table contains information about the aging time before a dynamic MAC address is erased, and includes parameters for querying and viewing the Dynamic MAC Address table.
Page 188 Defining the Forwarding Database and Static Routes Defining Dynamic Forwarding Database Entries • Address Table Sort Key —Specifies the means by which the Dynamic MAC Address Table is sorted. The address table can be sorted by address, VLAN, or interface. Define the fields.
Page 189: Configuring Routing
IP routes. To configure an IP static route: Note For configuring the switch as a router, please reffer to the D-Link CLI WLAN CLI Reference Guide Click Basic Setup > Routing > IP Static Route. The IP Static Route Page opens.
Page 190 Defining the Forwarding Database and Static Routes Configuring Routing Click . The Add IP Static Route page opens: Define the fields. Click . The IP static route is defined and the device is updated. Page 189...
Page 191 DXS/DWS 3200 Series User Guide Page 190...
Page 192: Configuring Spanning Tree
Configuring Spanning Tree Section 15. Configuring Spanning Tree Spanning Tree Protocol (STP) provides tree topography for any arrangement of bridges. STP also provides a sin- gle path between end stations on a network, eliminating loops. Loops occur when alternate routes exist between hosts. Loops in an extended network can cause bridges to for- ward traffic indefinitely, resulting in increased traffic and reducing network efficiency.
Page 193: Defining Classic Spanning Tree
DXS/DWS 3200 Series User Guide Defining Classic Spanning Tree The STP Properties Page contains parameters for enabling STP on the device. To enable STP on the device: Click Advanced Setup > Spanning Tree > STP > Properties. The STP Properties Page opens: Figure 122:STP Properties Page The STP Properties Page contains the following fields: •...
Page 194 Configuring Spanning Tree Defining Classic Spanning Tree – Short — Specifies 1 through 65,535 range for port path cost. This is the default value. – Long — Specifies 1 through 200,000,000 range for port path cost. The default path cost assigned to an interface varies according to the selected method (Hello Time, Max Age, or Forward Delay).
Page 195: Defining Stp On Interfaces
DXS/DWS 3200 Series User Guide Defining STP on Interfaces Network administrators can assign STP settings to specific interfaces using the STP Interface Page. The Global LAGs section displays the STP information for Link Aggregated Groups. To assign STP settings to an interface: Click Advanced Setup >...
Page 196 Designated Bridge ID — Indicates the bridge priority and the MAC Address of the designated bridge. • Designated Port ID — Indicates the selected port D-Link priority and interface. • Designated Cost — Indicates the cost of the port participating in the STP topology. Ports with a lower cost are less likely to be blocked if STP detects loops.
Page 197 DXS/DWS 3200 Series User Guide Define the Fast Link, Enable Root Guard, Path Cost, Default Path Cost, and Priority fields. Click . STP is enabled on the interface, and the device is updated. Page 196...
Page 198: Defining Rapid Spanning Tree
Configuring Spanning Tree Defining Rapid Spanning Tree Defining Rapid Spanning Tree While Classic STP prevents Layer 2 forwarding loops in a general network topology, convergence can take between 30-60 seconds. This time may delay detecting possible loops and propagating status topology changes. Rapid Spanning Tree Protocol (RSTP) detects and uses network topologies that allow a faster STP convergence without creating forwarding loops.
Page 199: Defining Multiple Spanning Tree
DXS/DWS 3200 Series User Guide – STP — Classic STP is enabled on the device. – Rapid STP — Rapid STP is enabled on the device. – Multiple STP — Multiple STP is enabled on the device. • Fast Link Operational Status — Indicates whether Fast Link is enabled or disabled for the port or LAG. If Fast Link is enabled for a port, the port is automatically placed in the forwarding state.
Page 200 Configuring Spanning Tree Defining Multiple Spanning Tree Properties Page contains information for defining global MSTP settings, including region names, MSTP revisions, and maximum hops. To define MSTP: Click Advanced Setup > Spanning Tree > MSTP > Properties. The MSTP Properties Page opens: Figure 127:MSTP Properties Page The MSTP Properties Page contains the following fields: •...
Page 201: Defining Mstp Instance Settings
DXS/DWS 3200 Series User Guide Defining MSTP Instance Settings MSTP maps VLANs into STP instances. Packets assigned to various VLANs are transmitted along different paths within Multiple Spanning Tree Regions (MST Regions). Regions are one or more Multiple Spanning Tree bridges by which frames can be transmitted.
Page 202 Configuring Spanning Tree Defining Multiple Spanning Tree Figure 129:MSTP Instance Configuration Table Define the Instance ID field. Click . The MSTP Instances are assigned, and the device is updated. Page 201...
Page 203: Defining Mstp Interface Settings
DXS/DWS 3200 Series User Guide Defining MSTP Interface Settings Network Administrators can assign MSTP Interface settings in the MSTP Instance Settings Page To define MSTP interface settings: Click Advanced Setup > Spanning Tree > MSTP > Interface Settings. The MSTP Interface Settings Page opens: Figure 130:MSTP Interface Settings Page MSTP Interface Settings Page contains the following fields:...
Page 204 Configuring Spanning Tree Defining Multiple Spanning Tree – Root — Provides the lowest cost path to forward packets to the root device. – Designated — Indicates the port or LAG through which the designated device is attached to the LAN. –...
Page 205 DXS/DWS 3200 Series User Guide This page is left intentionally. Page 204...
Page 206: Configuring Multicast Forwarding
Configuring Multicast Forwarding Section 16. Configuring Multicast Forwarding This section contains information for configuring Multicast forwarding and Multicast TV, and includes the following sections: • Defining IGMP Snooping • Defining Multicast Bridging Groups • Defining Multicast Forward All Settings • Configuring Multicast TV Page 205...
Page 207: Defining Igmp Snooping
DXS/DWS 3200 Series User Guide Defining IGMP Snooping When IGMP Snooping is enabled globally, all IGMP packets are forwarded to the CPU. The CPU analyzes the incoming packets and determines: • Which ports want to join which Multicast groups. • Which ports have Multicast routers generating IGMP queries.
Page 208 Configuring Multicast Forwarding Defining IGMP Snooping • Auto Learn — Indicates if Auto Learn is enabled on the device. If Auto Learn is enabled, the devices auto- matically learns where other Multicast groups are located. Enables or disables Auto Learn on the Ethernet device.The possible field values are: –...
Page 209: Defining Multicast Bridging Groups
DXS/DWS 3200 Series User Guide Defining Multicast Bridging Groups The Multicast Group Page displays the ports and LAGs attached to the Multicast service group in the Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or LAGs joined the Multicast group.
Page 210 Configuring Multicast Forwarding Defining Multicast Bridging Groups • Ports — Displays Port that can be added to a Multicast service. The following table contains the IGMP port and LAG members management settings: Table 12: IGMP Port/LAG Members Table Control Settings Po rt C on tr ol De f in iti o n Dynamically joins ports/LAG to the Multicast group in the Current Row.
Page 211: Defining Multicast Forward All Settings
DXS/DWS 3200 Series User Guide Defining Multicast Forward All Settings The Bridge Multicast Forward All page contains fields for attaching ports or LAGs to a device that is attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the appropriate port or VLAN.
Page 212 Configuring Multicast Forwarding Defining Multicast Bridging Groups The following table summarizes the Multicast settings which can be assigned to ports in the Multicast Forward All Page. Table 13: Bridge Multicast Forward All Router/Port Control Settings Table Port Control D e f i n i t i o n Attaches the port to the Multicast router or switch as a dynamic port.
Page 213: Configuring Multicast Tv
DXS/DWS 3200 Series User Guide Configuring Multicast TV Multicast TV allows subscribers to join the same Multicast stream, even if the subscribers are not members of the same VLAN, eliminating television traffic duplication. Ports which receive Multicast Transmissions, or Receiver Ports, can be defined in any VLAN, and not just in the Multicast VLAN.
Page 214 Configuring Multicast Forwarding Configuring Multicast TV Click . The Add IGMP Snooping Mapping Page opens. Figure 137:Add IGMP Snooping Mapping Page Define the VLAN and Multicast Group fields. Click . IGMP Snooping is defined for Multicast TV groups, and the device is updated. Page 213...
Page 215: Viewing Multicast Tv Members
DXS/DWS 3200 Series User Guide Viewing Multicast TV Members The Multicast TV Membership Page allows network managers to display the ports associated with a Multicast TV VLAN. Ports and trunks are assigned to Multicast VLAN in the . To define IP Interface Page Multicast TV Members: Multicast TV Member-...
Page 216: Configuring Snmp
Configuring SNMP SNMP v1 and v2c Section 17. Configuring SNMP Simple Network Management Protocol (SNMP) provides a method for managing network devices. The device supports the following SNMP versions: • SNMP version 1 • SNMP version 2c • SNMP version 3 SNMP v1 and v2c The SNMP agents maintain a list of variables, which are used to manage the device.
Page 217: Defining Snmp Security
DXS/DWS 3200 Series User Guide • Defining SNMP Group Members • Defining SNMP Communities Defining SNMP Security The SNMP Security Global Parameters Page permits the enabling of both SNMP and Authentication notifications. To define the SNMP security parameters: Click System > SNMP > Security > Global Parameters. The SNMP Security Global Parameters Page opens: Figure 139:SNMP Security Global Parameters Page The SNMP Security Global Parameters Page contains the following fields:...
Page 218: Defining Snmp Views
Configuring SNMP Configuring SNMP Security Defining SNMP Views SNMP Insert space views provide or block access to device features or portions of features. For example, a view can be defined which provides that SNMP group A has Read Only (R/O) access to Multicast groups, while SNMP group B has Read-Write (R/W) access to Multicast groups.
Page 219 DXS/DWS 3200 Series User Guide Figure 141:Add SNMP View Page Define the View Name field. Define the view using Define the View Type field. Click . The view is defined, and the device is updated. Page 218...
Page 220: Defining Snmp Group Profiles
Configuring SNMP Configuring SNMP Security Defining SNMP Group Profiles The SNMP Group Profile Page provides information for creating SNMP groups, and assigning SNMP access con- trol privileges to SNMP groups. Groups allow network managers to assign access rights to specific device fea- tures, or feature aspects.
Page 221 DXS/DWS 3200 Series User Guide – Write — Management access is read-write and changes can be made to the assigned SNMP view. – Notify — Sends traps for the assigned SNMP view. • Remove — Removes SNMP groups. The possible field values are: –...
Page 222 Configuring SNMP Configuring SNMP Security Figure 144:SNMP Group Profile Settings Page Modify the fields. Click . The SNMP group profile is modified, and the device is updated. Page 221...
Page 223: Defining Snmp Group Members
DXS/DWS 3200 Series User Guide Defining SNMP Group Members The SNMP Group Membership Page enables assigning system users to SNMP groups, as well as defining the user authentication method. Click System > SNMP > Security > Group Membership. The SNMP Group Membership Page opens: Figure 145:SNMP Group Membership Page The SNMP Group Membership Page contains the following fields: •...
Page 224 Configuring SNMP Configuring SNMP Security • Remove — Removes users from a specified group. The possible field values are: – Checked — Removes the selected user. – Unchecked — Maintains the list of users. Click . The Add SNMP Group Membership Page opens: Figure 146:Add SNMP Group Membership Page In addition to the fields in the SNMP Group Membership Page, the Add SNMP Group Membership Page contains the following fields:...
Page 225 DXS/DWS 3200 Series User Guide Figure 147:SNMP Group Membership Settings Page Modify the Group Name, Engine ID, Authentication Method, Password, Authentication Key, and Privacy Key fields. Click . The SNMP group membership is modified, and the device is updated. Page 224...
Page 226: Defining Snmp Communities
Configuring SNMP Configuring SNMP Security Defining SNMP Communities Access rights are managed by defining communities in the SNMP Communities Page. When the community names are changed, access rights are also changed. SNMP communities are defined only for SNMP v1 and SNMP v2c.
Page 227 DXS/DWS 3200 Series User Guide – Read Write — Management access is read-write and changes can be made to the device configuration, but not to the community. – SNMP Admin — User has access to all device configuration options, as well as permissions to modify the community.
Page 228: Configuring Snmp Notifications
Configuring SNMP Configuring SNMP Notifications Click . The SNMP Community Settings Page opens: Figure 150: SNMP Community Settings Page Modify the SNMP Management Station, Community String, and Basic or Advanced fields. Click . The SNMP community is modified, and the device is updated. Configuring SNMP Notifications This section contains information for configuring SNMP Notifications, and contains the following topics: •...
Page 229: Defining Snmp Notification Global Parameters
DXS/DWS 3200 Series User Guide Defining SNMP Notification Global Parameters The SNMP Notification Properties Page contains parameters for defining SNMP notification parameters. To define SNMP notification global parameters: Click System > SNMP > Notification > Properties. The SNMP Notification Properties Page opens: Figure 151:SNMP Notification Properties Page The SNMP Notification Properties Page contains the following fields: •...
Page 230: Defining Snmp Notification Filters
Configuring SNMP Configuring SNMP Notifications Defining SNMP Notification Filters TheSNMP Notification Filter Page permits filtering traps based on OIDs. Each OID is linked to a device feature or a portion of a feature. The SNMP Notification Filter Page also allows network managers to filter notifications. To define SNMP notification filters: Click System >...
Page 231 DXS/DWS 3200 Series User Guide Figure 153:Add SNMP Notification Filter Page Define the Filter Name, New Object Identifier Tree, and Filter Type fields. Click . The SNMP notification filter is defined, and the device is updated. Page 230...
Page 232: Defining Snmp Notification Recipients
Configuring SNMP Configuring SNMP Notifications Defining SNMP Notification Recipients The SNMP Notification Receiver Page contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services: •...
Page 233 DXS/DWS 3200 Series User Guide SNMPv1,2c Notification Recipient The SNMP v1, v2c Recipient table contains the following fields: • Recipients IP — Displays the IP address to which the traps are sent. • Notification Type — Displays the notification sent. The possible field values are: –...
Page 234: Snmpv3 Notification Recipient
Configuring SNMP Configuring SNMP Notifications SNMPv3 Notification Recipient The SNMPv3 Notification Recipient table contains the following fields: • Recipient IP — Displays the IP address to which the traps are sent. • Notification Type — Displays the type of notification sent. The possible field values are: –...
Page 235 DXS/DWS 3200 Series User Guide Figure 155:Add SNMP Notification Receiver Page Define the fields. Click . The SNMP Notification recipients are defined, and the device is updated. To modify SNMP notification recipients: Click System > SNMP > Notification > Notification Receiver. The SNMP Notification Receiver Page opens.
Page 236 Configuring SNMP Configuring SNMP Notifications Figure 156:SNMP Notification Receiver Settings Page Modify the fields. Click . The SNMP notification recipients are defined, and the device is updated. Page 235...
Page 237 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 236...
Page 238: Configuring Quality Of Service
Configuring Quality of Service Section 18. Configuring Quality of Service This section contains information for configuring QoS, and includes the following topics: • Quality of Service Overview • Defining General QoS Settings • Configuring QoS Mapping Click . The policy is bound to the interface, and the device is updated. Page 237...
Page 239: Quality Of Service Overview
DXS/DWS 3200 Series User Guide Quality of Service Overview Quality of Service (QoS) provides the ability to implement QoS and priority queuing within a network. For example, certain types of traffic that require minimal delay, such as Voice, Video, and real-time traffic can be assigned a high priority queue, while other traffic can be assigned a lower priority queue.
Page 240 Configuring Quality of Service Defining General QoS Settings Figure 157:CoS Page The CoS Page contains the following: • Quality of Service — Determines whether QoS is enabled on the interface. The possible values are: – Enable — Enables QoS on the interface. –...
Page 241 DXS/DWS 3200 Series User Guide Select Enable in the Quality of Service field. Define the Trust Mode field. Click . Quality of Service is enabled on the device. Page 240...
Page 242: Restoring Factory Default Qos Interface Settings
Configuring Quality of Service Defining General QoS Settings Restoring Factory Default QoS Interface Settings Click Basic Setup > Quality of Service > General Settings > General Settings. The CoS Page opens. Select an interface by clicking the Check the Restore Defaults checkbox. Click .
Page 243 DXS/DWS 3200 Series User Guide The Bandwidth Settings Page contains the following fields: • Unit no— Indicates the stacking members for which the bandwidth settings are displayed. • Port— Indicates the port that is being displayed • Ingress Rate Limit — Indicates the traffic limit for the port. •...
Page 244: Defining Queues
Configuring Quality of Service Defining General QoS Settings Defining Queues The Queue Page contains fields for defining the QoS queue forwarding types. To set the queue settings: Click Basic Setup > Quality of Service > Global Parameters > Queue. The Queue Page opens. Figure 160:Queue Page The Queue Page contains the following fields: •...
Page 245: Configuring Qos Mapping
DXS/DWS 3200 Series User Guide Configuring QoS Mapping This section contains information for mapping CoS and DSCP values to queues, and includes the following sec- tions: • Mapping CoS Values to Queues • Mapping DSCP Values to Queues Mapping CoS Values to Queues The CoS to Queue Page contains fields for mapping CoS values to traffic queues.
Page 246: Mapping Dscp Values To Queues
Configuring Quality of Service Configuring QoS Mapping Mapping DSCP Values to Queues The DSCP to Queue Page contains fields for mapping DSCP settings to traffic queues. For example, a packet with a DSCP tag value of 3 can be assigned to queue 2. To map CoS values to queues: Click Basic Setup >...
Page 247: Configuring Advanced Qos Settings
DXS/DWS 3200 Series User Guide Configuring Advanced QoS Settings This section contains information for configuring advanced QoS features, and includes the following topics: • Defining Policy Properties • Defining Policy Profiles Defining Policy Properties This section contains information for configuring advanced policy properties, and includes the following topics: •...
Page 248 Configuring Quality of Service Configuring Advanced QoS Settings Mapping DSCP Values When traffic exceeds user-defined limits, use the Advanced DSCP to Queue Page to configure the DSCP tag to use in place of the incoming DSCP tags. To define Advance QoS DSCP mapping Click Basic Setup >...
Page 249: Defining Tail Dropping
DXS/DWS 3200 Series User Guide Defining Tail Dropping The Tail Drop Page permits network managers to set the device to drop packets which exceed the threshold size. Tail Drop is configured per queue. • Click Advance Setup > Quality of Service > Policy Properties > Tail Drop. The Tail Drop Page opens. Figure 164:Tail Drop Page The Tail Drop Page contains the following field: •...
Page 250: Creating Class Maps
Configuring Quality of Service Configuring Advanced QoS Settings Creating Class Maps One IP ACL and/or one MAC ACL comprise a class map. Class maps are configured to match packet criteria, and are matched to packets on a first-fit basis. For example, Class Map A is assigned packets based only on an IP-based ACL or To define a MAC-based ACL.
Page 251 DXS/DWS 3200 Series User Guide Figure 166:Add Class Map Page Define the fields. Click . The Class Map is defined, and the device is updated. Page 250...
Page 252 Configuring Quality of Service Configuring Advanced QoS Settings Aggregating Policiers After a packet is classified, the policing process begins. A policier specifies the bandwidth limit for incoming traffic on the classified flow and actions are defined for packets that exceed the limits. These actions include forwarding packets, dropping packets, or remarking packets with a new DSCP value.
Page 253 DXS/DWS 3200 Series User Guide Figure 168:Add Aggregated Policier Page Define the fields. Click . The Aggregated Policier is defined, and the device is updated. Page 252...
Page 254: Defining Policy Profiles
Configuring Quality of Service Configuring Advanced QoS Settings Defining Policy Profiles This section contains information for configuring policy profiles, and includes the following topics: • Defining Policies • Attaching Policies to Interfaces Defining Policies A policy is a collection of classes, each of which is a combination of a class map and a QoS action to apply to matching traffic.
Page 255 DXS/DWS 3200 Series User Guide • Remove — Removes policies. The possible field values are: – Checked — Removes the selected policy. – Unchecked — Maintains policies. Click . The Add QoS Policy Profile Page opens: Figure 170:Add QoS Policy Profile Page In addition to the fields in the Policy Page, the Add QoS Policy Profile Page contains the following fields: •...
Page 256 Configuring Quality of Service Configuring Advanced QoS Settings • — CIR in bits per second. This field is only relevant when the Ingress Committed Information Rate (CIR) value is Police Single • Ingress Committed Burst Size (CBS) — CBS in bytes per second. This field is only relevant when the Police value is Single...
Page 257 DXS/DWS 3200 Series User Guide Select an interface. Define the Policy Name field. Click . The policy is bound to the interface, and the device is updated. Page 256...
Page 258: Managing System Files
Managing System Files File Management Overview Section 19. Managing System Files File maintenance includes both configuration file management as well as device access. This section contains the following topics: • File Management Overview • Downloading System Files • Uploading System Files •...
Page 259: Downloading System Files
DXS/DWS 3200 Series User Guide Downloading System Files There are two types of files, firmware files and configuration files. The firmware files manage the device, and the configuration files configure the device for transmissions. Only one type of download can be performed at any one time.
Page 260: Configuration Download
Managing System Files Downloading System Files Configuration Download The Configuration Download section contains the following fields: • Configuration Download — Indicates that the download is for configuration files. If Configuration Download is selected, the Firmware Download fields are grayed out. •...
Page 261: Uploading System Files
DXS/DWS 3200 Series User Guide Uploading System Files The File Upload Page contains fields for uploading the software from the device to the TFTP server. To upload system files: Click System > File Management > File Upload. The File Upload Page opens: Figure 173:File Upload Page The File Upload Page is divided into the following sections: •...
Page 262: Software Image Upload
Managing System Files Uploading System Files Software Image Upload The Software Image Upload section contains the following fields: • TFTP Server IP Address — Specifies the TFTP Server IP Address to which the Software Image is uploaded. • Destination File Name — Specifies the software image file path to which the file is uploaded. Configuration Upload The Configuration Upload section contains the following fields: •...
Page 263: Activating Image Files
DXS/DWS 3200 Series User Guide Activating Image Files The Active Image Page allows network managers to select and reset the Image files. The Active Image file for each unit in a stacking configuration can be individually selected. Click System > File Management > Active Image. The Active Image Page opens: Figure 174:Active Image Page The Active Image Page contains the following fields: •...
Page 264: Copying Files
Managing System Files Copying Files Copying Files Files can be copied and deleted from the Copy Files Page. To copy files: Click System > File Management > Copy Files. The Copy Files Page opens. Figure 175:Copy Files Page The Copy Files Page contains the following fields: •...
Page 265: Managing System Files
DXS/DWS 3200 Series User Guide Managing System Files The File System Page provides information about files currently stored on the system, including file names, file sizes, files modifications, and file permissions. The file system permits managing up to five files and a total file size of 3MB.
Page 266: Managing System Logs
Managing System Logs Section 20. Managing System Logs This section provides information for managing system logs. The system logs enable viewing device events in real time, and recording the events for later usage. System Logs record and manage events and report errors and informational messages.
Page 267: Enabling System Logs
DXS/DWS 3200 Series User Guide Enabling System Logs The Syslog Properties Page contains fields for defining which events are recorded to which logs. It contains fields for enabling logs globally, and parameters for defining logs. Log messages are listed from the highest severity to the lowest severity level.
Page 268 Managing System Logs Enabling System Logs – Informational — Provides device information. – Debug — Provides debugging messages. Note When a severity level is selected, all severity level choices above the selection are selected automatically. – Console — Defines the minimum severity level from which logs are sent to the console. –...
Page 269: Viewing The Device Memory Logs
DXS/DWS 3200 Series User Guide Viewing the Device Memory Logs The Device Memory Log Page contains all system logs in a chronological order that are saved in RAM (Cache). To open the Device Memory Log Page: • Click System > Syslog > Memory. The Device Memory Log Page opens. Figure 178:Device Memory Log Page The Device Memory Log Page contains the following fields: •...
Page 270: Viewing The Flash Logs
Managing System Logs Viewing the FLASH Logs Viewing the FLASH Logs The Syslog Flash Page contains information about log entries saved to the log file in Flash, including the time the log was generated, the log severity, and a description of the log message. The message log is available after reboot.
Page 271: Defining Servers Log Parameters
DXS/DWS 3200 Series User Guide Defining Servers Log Parameters The Syslog Server Settings Page contains information for viewing and configuring the remote log servers. New log servers can be defined, and the log severity sent to each server. To open the Syslog Server Settings Page: Click System >...
Page 272 Managing System Logs Defining Servers Log Parameters Figure 181:Add Syslog Server Page Define the Log Server IP Address, UDP Port, Facility, Description, and Minimum serverity fields. Click . The Syslog Server is defined, and the device is updated. Page 271...
Page 273 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 272...
Page 274: Managing Device Diagnostics
Managing Device Diagnostics Section 21. Managing Device Diagnostics This section contains the following topics: • Configuring Port Mirroring • Viewing Integrated Cable Tests • Viewing Optical Transceivers • Viewing the CPU Utilization Page 273...
Page 275: Configuring Port Mirroring
DXS/DWS 3200 Series User Guide Configuring Port Mirroring Port mirroring monitors and mirrors network traffic by forwarding copies of incoming and outgoing packets from one port to a monitoring port. Port mirroring can be used as a diagnostic tool as well as a debugging feature. Port mirroring also enables switch performance monitoring.
Page 276 Managing Device Diagnostics Configuring Port Mirroring – Ready — Indicates the port is not currently monitored. • Remove — Removes the port mirroring session. The possible field values are: – Checked — Removes the selected port mirroring sessions. – Unchecked — Maintains the port mirroring session. Click .
Page 277 DXS/DWS 3200 Series User Guide To edit the port mirroring settings: Click System > Diagnostics > Port Mirroring. The Port Mirroring Page opens. Click . The Port Mirroring Settings Page opens: Figure 184:Port Mirroring Settings Page Modify the Type field. Click .
Page 278: Viewing Integrated Cable Tests
Managing Device Diagnostics Viewing Integrated Cable Tests Viewing Integrated Cable Tests The Copper Cable Tests Page contains fields for performing tests on copper cables. Cable testing provides infor- mation about where errors occurred in the cable, the last time a cable test was performed, and the type of cable error, which occurred.
Page 279 DXS/DWS 3200 Series User Guide • Last Update — Indicates the last time the port was tested. • Cable Length — Indicates the approximate cable length. This test can only be performed when the port is up and operating at 1 Gbps. Click .
Page 280: Viewing Optical Transceivers
Managing Device Diagnostics Viewing Optical Transceivers Viewing Optical Transceivers The Optical Transceiver page allows network managers to perform tests on Fiber Optic cables. Optical transceiver diagnostics can be performed only when the link is present. To test cables: • Click System > Diagnostics > Optical Transceivers tab. The Optical Transceivers Page opens: Figure 186: Optical Transceivers Page The Optical Transceivers Page contains the field: •...
Page 281: Viewing The Cpu Utilization
DXS/DWS 3200 Series User Guide Viewing the CPU Utilization The CPU Utilization Page contains information about the system’s CPU utilization. To view the CPU Utilization: • Click System > CPU > CPU Utilization. The CPU Utilization Page opens: Figure 187: CPU Utilization Page The CPU Utilization Page contains the following fields: •...
Page 282: Configuring System Time
Configuring System Time Configuring Daylight Savings Time Section 22. Configuring System Time This section provides information for configuring system time parameters, including: • Configuring Daylight Savings Time • Configuring SNTP Configuring Daylight Savings Time The Time Page contains fields for defining system time parameters for both the local hardware clock and the external SNTP clock.
Page 283 DXS/DWS 3200 Series User Guide • Italy — From the last weekend of March until the last weekend of October. • Japan — Japan does not use Daylight Saving Time. • Jordan — From the last weekend of March until the last weekend of October. •...
Page 284 Configuring System Time Configuring Daylight Savings Time Figure 188:Time Page The Time Page contains the following sections: • Clock Source — The source used to set the system clock. The possible field values are: – None — Indicates that a clock source is not used. The clock is set locally. –...
Page 285 DXS/DWS 3200 Series User Guide – Date — The date on which DST begins. The possible field range is 1-31. – Month — The month of the year in which DST begins. The possible field range is Jan-Dec. – Year — The year in which the configured DST begins. –...
Page 286: Configuring Sntp
Configuring System Time Configuring SNTP Configuring SNTP The device supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network device clock time synchronization up to the millisecond. Time synchronization is performed by a network SNTP server. The device operates only as an SNTP client, and cannot provide time services to other systems. The device can poll the following server types for the server time: •...
Page 287: Defining Sntp Global Settings
DXS/DWS 3200 Series User Guide This section contains the following topics: ² Defining SNTP Global Settings • Defining SNTP Authentication • Defining SNTP Servers • Defining SNTP Interface Settings Defining SNTP Global Settings The SNTP Properties Page provides information for defining SNTP parameters globally. To define SNTP global parameters: Click System >...
Page 288 Configuring System Time Defining SNTP Global Settings • Enable Receive Unicast Servers Updates — Defines whether or not the device polls the SNTP server for Unicast server time information. If the Enable Receive Broadcast Servers Updates, Enable Receive Anycast Servers Updates, and Enable Receive Unicast Servers Updates fields are all enabled, the system time is set according the Unicast server time information.
Page 289: Defining Sntp Authentication
DXS/DWS 3200 Series User Guide Defining SNTP Authentication The SNTP Authentication Page provides parameters for defining the means by which the SNTP server is authen- ticated. To define SNTP authentication: Click System > SNTP > Authentication. The SNTP Authentication Page opens: Figure 190:SNTP Authentication Page The SNTP Authentication Page contains the following fields: •...
Page 290 Configuring System Time Defining SNTP Authentication To define SNTP authentication parameters: Click . The Section Figure 191: "Add SNTP Authentication" page opens: Figure 191:Add SNTP Authentication Define the Encryption Key ID, Authentication Key, and Trusted Key fields. Click . The SNTP Authentication Key is added, and the device is updated. Page 289...
Page 291: Defining Sntp Servers
DXS/DWS 3200 Series User Guide Defining SNTP Servers The SNTP Servers Page contains information for enabling SNTP servers, as well as adding new SNTP servers. In addition, the SNTP Servers Page enables the device to request and accept SNTP traffic from a server. To define an SNTP server: Click System >...
Page 292 Configuring System Time Defining SNTP Servers • Last Response — Displays the last time a response was received from the SNTP server. • Offset — Indicates the time difference between the device local clock and the acquired time from the SNTP server.
Page 293: Defining Sntp Interface Settings
DXS/DWS 3200 Series User Guide Defining SNTP Interface Settings The SNTP Interface Settings Page contains fields for setting SNTP on different interfaces. To define SNTP inter- face settings: Click System > SNTP > Interface Settings. The SNTP Interface Settings Page opens: Figure 194:SNTP Interface Settings Page The SNTP Interface Settings Page contains the following fields: •...
Page 294 Configuring System Time Defining SNTP Interface Settings Figure 195:Add SNTP Interface Page Define the Interface and Receive Server Updates fields. Click . The SNTP interface is added, and the device is updated. Page 293...
Page 295 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 294...
Page 296: Viewing Statistics
Viewing Statistics Viewing Interface Statistics Section 23. Viewing Statistics This section provides device statistics for RMON, interfaces, GVRP, EAP, and Etherlike statistics. This section contains the following topics: • Viewing Interface Statistics • Managing RMON Statistics Viewing Interface Statistics This section contains the following topics: •...
Page 297: Viewing Device Interface Statistics
DXS/DWS 3200 Series User Guide Viewing Device Interface Statistics The Interface Statistics Page contains statistics for both received and transmitted packets. Click Basic Setup > Interface Statistics > Interface. The Interface Statistics Page opens. Figure 196:Interface Statistics Page The Interface Statistics Page contains the following fields: •...
Page 298: Resetting Interface Statistics Counters
Viewing Statistics Viewing Interface Statistics Transmit Statistics • Total Bytes (Octets) — Displays the number of octets transmitted from the selected interface. • Unicast Packets — Displays the number of Unicast packets transmitted from the selected interface. • Multicast Packets — Displays the number of Multicast packets transmitted from the selected interface. •...
Page 299: Viewing Port Utilization Statistics
DXS/DWS 3200 Series User Guide Viewing Port Utilization Statistics The Port Utilization Page contains port utilization information for specific ports. To view the port utilization statis- tics: Click Basic Setup > Interface Statistics > Port Utilization. The Port Utilization Page opens. Figure 197:Port Utilization Page The Port Utilization Page contains the following fields: •...
Page 300: Viewing Etherlike Statistics
Viewing Statistics Viewing Interface Statistics Viewing Etherlike Statistics The Etherlike Statistics Page contains interface statistics. To view Etherlike Statistics: Click Basic Setup > Interfaces Statistics > Etherlike. The Etherlike Statistics Page opens Figure 198:Etherlike Statistics Page The Etherlike Statistics Page contains the following fields: •...
Page 301: Resetting Etherlike Statistics Counters
DXS/DWS 3200 Series User Guide • Internal MAC Transmit Errors — Displays the number of internal MAC transmit errors on the selected interface. • Oversize Packets — Displays the number of oversized packet errors on the selected interface. • Internal MAC Receive Errors — Number of internal MAC received errors on the selected interface. •...
Page 302: Viewing Gvrp Statistics
Viewing Statistics Viewing Interface Statistics Viewing GVRP Statistics The GVRP Statistics Page contains device statistics for GVRP. To view GVRP statistics: • Click Advanced Setup > Interface Statistics > GVRP. The GVRP Statistics Page opens. Figure 199:GVRP Statistics Page The GVRP Statistics Page contains the following fields: •...
Page 303: Resetting Gvrp Statistics Counters
DXS/DWS 3200 Series User Guide • Leave In—Displays the device GVRP Leave in statistics. • Leave All—Displays the device GVRP Leave all statistics. • Invalid Protocol ID—Displays the device GVRP Invalid Protocol ID statistics. • Invalid Attribute Type—Displays the device GVRP Invalid Attribute ID statistics. •...
Page 304: Viewing Eap Statistics
Viewing Statistics Viewing Interface Statistics Viewing EAP Statistics The EAP Statistics Page contains information about EAP packets received on a specific port. To view the EAP Statistics: • Click Advanced Setup > Interface Statistics > EAP. The EAP Statistics Page opens. Figure 200:EAP Statistics Page The EAP Statistics Page contains the following fields: •...
Page 305 DXS/DWS 3200 Series User Guide • Respond ID Frames Receive — Indicates the number of EAP Resp/Id frames that have been received on the port. • Respond Frames Receive — Indicates the number of valid EAP Response frames received on the port. •...
Page 306: Managing Rmon Statistics
Viewing Statistics Managing RMON Statistics Managing RMON Statistics This section contains the following topics: • Viewing RMON Statistics • Configuring RMON History • Configuring RMON Events • Defining RMON Alarms Page 305...
Page 307: Viewing Rmon Statistics
DXS/DWS 3200 Series User Guide Viewing RMON Statistics The Viewing RMON Statistics contains fields for viewing information about device utilization and errors that occurred on the device. To view RMON statistics: Click Advanced Setup > RMON > Statistics. The RMON Statistics Page opens. Figure 201:RMON Statistics Page The RMON Statistics Page contains the following fields: •...
Page 308: Resetting Rmon Statistics Counters
Viewing Statistics Managing RMON Statistics • Received Bytes (Octets) — Displays the number of octets received on the interface since the device was last refreshed. This number includes bad packets and FCS octets, but excludes framing bits. • Received Packets — Displays the number of packets received on the interface, including bad packets, Multicast and broadcast packets, since the device was last refreshed.
Page 309: Configuring Rmon History
DXS/DWS 3200 Series User Guide Configuring RMON History This section contains the following topics: • Defining RMON History Control • Viewing the RMON History Table Defining RMON History Control The RMON History Control Page contains information about samples of data taken from ports. For example, the samples may include interface definitions or polling periods.
Page 310 Viewing Statistics Managing RMON Statistics • Sampling Requested— Displays the number of samples to be saved. The field range is 1-65535. The default value is 50. • Current Number of Samples— Displays the current number of samples taken. • Owner — Displays the RMON station or user that requested the RMON information. The field range is 0-20 characters.
Page 311: Viewing The Rmon History Table
DXS/DWS 3200 Series User Guide Viewing the RMON History Table The RMON History Table Page contains interface specific statistical network samplings. Each table entry repre- sents all counter values compiled during a single sample. To view the RMON History Table: Click Advanced Setup >...
Page 312 Viewing Statistics Managing RMON Statistics • CRC Align Errors — Displays the number of CRC and Align errors that have occurred on the interface since the device was last refreshed. • Undersize Packets — Displays the number of undersized packets (less than 64 octets) received on the interface since the device was last refreshed.
Page 313: Configuring Rmon Events
DXS/DWS 3200 Series User Guide Configuring RMON Events This section includes the following topics: • Defining RMON Events Control • Viewing the RMON Events Logs Defining RMON Events Control The RMON Events Control Page contains fields for defining RMON events. To view RMON events: •...
Page 314 Viewing Statistics Managing RMON Statistics • Owner — Displays the device or user that defined the event. • Remove — Removes a RMON event. The possible field values are: – Checked — Removes a selected RMON event. – Unchecked — Maintains RMON events. Page 313...
Page 315: Viewing The Rmon Events Logs
DXS/DWS 3200 Series User Guide Viewing the RMON Events Logs The RMON Events Logs Page contains a list of RMON events. To view RMON event logs: • Click Advanced Setup > RMON > Events > Events Logs. The RMON Events Logs Page opens. Figure 206:RMON Events Logs Page The RMON Events Logs Page contains the following fields: •...
Page 316: Defining Rmon Alarms
Viewing Statistics Managing RMON Statistics Defining RMON Alarms The RMON Alarm Page contains fields for setting network alarms. Network alarms occur when a network problem, or event, is detected. Rising and falling thresholds generate events. To set RMON alarms: Click Advanced Setup > RMON > Alarm. The RMON Alarm Page opens. Figure 207:RMON Alarm Page The RMON Alarm Page contains the following fields: •...
Page 317 DXS/DWS 3200 Series User Guide – TRAP — Indicates that an SNMP trap is generated, and sent via the Trap mechanism. The Trap can also be saved using the Trap mechanism. – Both— Indicates that both the Log and Trap mechanism are used to report alarms. •...
Page 318: Appendix A, Wlan Country Settings
Appendix A, WLAN Country Settings This appendix contains vital information for configuring WLAN, including the country codes, power regulations, and fre- quency ranges. C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y...
Page 319 DXS/DWS 3200 Series User Guide C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 320 Appendix A, WLAN Country Settings C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 321 DXS/DWS 3200 Series User Guide C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 322 Appendix A, WLAN Country Settings C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 323 DXS/DWS 3200 Series User Guide C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 324 Appendix A, WLAN Country Settings C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 325 DXS/DWS 3200 Series User Guide C o u n t r y C o u n t r y A c c e s s C h a n n e l s M a x i m u m F r e q u e n c y C o d e P o i n t...
Page 326: Appendix B, Device Specifications & Features
Appendix B, Device Specifications & Features Appendix B, Device Specifications & Features This appendix contains the device specifications and features pertaining to the DXS/DWS-3200 series. This sec- tion contains the following topics: • Hardware Specifications • DXS-3227, DXS-3227P, and DXS-3250 Features (any reference to PoE is only specific to the DXS-3227P and DWS-3227P model).
Page 327 DXS/DWS 3200 Series User Guide DXS-3227, DXS-3227P, and DXS-3250 Features This appendix describes the device features. The system supports the following features: F e a t u r e D e s c r i p t i o n Auto negotiation allows an device to advertise modes of opera- Auto Negotiation tion.
Page 328 Appendix B, Device Specifications & Features F e a t u r e D e s c r i p t i o n Domain Name System (DNS) converts user-defined domain Domain Name System names into IP addresses. Each time a domain name is assigned the DNS service translates the name into a numeric IP address.
Page 329 DXS/DWS 3200 Series User Guide F e a t u r e D e s c r i p t i o n Multicast service is a limited broadcast service, which allows one- MAC Multicast Support to-many and many-to-many connections for information distribu- tion.
Page 330 Appendix B, Device Specifications & Features F e a t u r e D e s c r i p t i o n Power over Ethernet (PoE) provide power to devices over exist- Power over Ethernet ing LAN cabling, without updating or modifying the network infra- structure.
Page 331 DXS/DWS 3200 Series User Guide F e a t u r e D e s c r i p t i o n The Simple Network Time Protocol (SNTP) assures accurate net- SNTP work Ethernet Switch clock time synchronization up to the milli- second.
Page 332 Appendix B, Device Specifications & Features F e a t u r e D e s c r i p t i o n VLAN Support VLANs are collections of switching ports that comprise a single broadcast domain. Packets are classified as belonging to a VLAN based on either the VLAN tag or based on a combination of the ingress port and packet contents.
Page 333 DXS/DWS 3200 Series User Guide This page is left blank intentionally. Page 332...
Page 334: Appendix B, Troubleshooting
Appendix B, Troubleshooting Appendix B, Troubleshooting This section describes problems that may arise when installing the and how to resolve these issue. This section includes the following topics: • Problem Management — Provides information about problem management with DXS-3250/DXS-3227P/ DXS-3227. •...
Page 335: Problem Management
DXS/DWS 3200 Series User Guide Problem Management Problem management includes isolating problems, quantifying the problems, and then applying the solution. When a problem is detected, the exact nature of the problem must be determined. This includes how the problem is detected, and what are the possible causes of the problem. With the problem known, the effect of the problem is recorded with all known results from the problem.
Page 336 Troubleshooting Solutions P r o bl em s P os si bl e C au se So lu t io n Self-test exceeds 15 The device may not be Remove and reinstall the device. If that does not seconds correctly installed. help, consult your technical support representative.
Page 337 DXS/DWS 3200 Series User Guide Pr o blems Possible Cau se Sol u tio n Add and Edit pages do A pop-up blocker is Disable pop-up blockers. not open. enabled. Lost password The Password Recovery Procedure enables the user to override the current password configuration, and disables the need for a password to access the con- sole.
Page 338: Contacting D-Link Technical Support
Contacting D-Link Technical Support Contacting D-Link Technical Support Software updates and user documentation can be found on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the warranty duration. For more information on locating the D-Link office in your region, see International Offices.
Page 339 DXS/DWS 3200 Series User Guide Page 338...
Page 340 Contacting D-Link Technical Support Page 339...
Page 341 DXS/DWS 3200 Series User Guide Page 340...
Page 342 Contacting D-Link Technical Support Page 341...
Page 343 DXS/DWS 3200 Series User Guide Page 342...
Page 344 Contacting D-Link Technical Support Page 343...
Page 345 DXS/DWS 3200 Series User Guide Page 344...
Page 346 Contacting D-Link Technical Support Page 345...
Page 347 DXS/DWS 3200 Series User Guide Page 346...
Page 348 Contacting D-Link Technical Support Page 347...
Page 349 DXS/DWS 3200 Series User Guide Page 348...
Page 350 Contacting D-Link Technical Support Page 349...
Page 351 DXS/DWS 3200 Series User Guide Page 350...
Page 352 Contacting D-Link Technical Support Page 351...
Page 353 DXS/DWS 3200 Series User Guide Page 352...
Page 354 Contacting D-Link Technical Support Page 353...
Page 355 DXS/DWS 3200 Series User Guide Page 354...
Page 356 Contacting D-Link Technical Support Page 355...
Page 357 DXS/DWS 3200 Series User Guide Page 356...
Page 358 Contacting D-Link Technical Support Page 357...
Page 359 DXS/DWS 3200 Series User Guide Page 358...
Page 360 Contacting D-Link Technical Support Page 359...
Page 361 DXS/DWS 3200 Series User Guide Page 360...
Page 362 Contacting D-Link Technical Support Page 361...
Page 363 DXS/DWS 3200 Series User Guide Page 362...
Page 364 Contacting D-Link Technical Support Page 363...
Page 365 DXS/DWS 3200 Series User Guide Page 364...
Page 366: Warranty
Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.
Page 367 UPS Ground or any common carrier selected by D-Link. Return ship- ping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect.
Page 368 RANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORM- ING PRODUCT.
Page 369 DXS/DWS 3200 Series User Guide Page 368...
Page 370: Product Registration
Product Registration Product Registration http://support.dlink.com/register/ D-Link products can be registered online at . Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Page 369...
Page 371 DXS/DWS 3200 Series User Guide Page 370...
Page 372: International Offices
TEL: 27-12-665-2165 78330 Fontenay le Fleury URL: www.dlink.com.au FAX: 27-12-665-2186 France India URL: www..d-link.co.za TEL: 33-1-30238688 D-Link House, Kurla Bandra Complex Russia FAX: 33-1-30238689 Road, Grafsky per., 14, floor 6 URL: www.dlink-france.fr Off CST Road, Santacruz (East), Mumbai - Moscow Netherlands 400098.

This manual is also suitable for:

Xstack dws-3227p Xstack dws-3250 Xstack dxs-3227p Xstack dxs-3250 Dws-3227 - xstack switch - stackable Dws-3227p-taa - 24gigabit wireless switch ... Show all

D-Link xStack DXS-3227 Web/Installation Manual

Device Description

Mounting Device

Initial Configuration

Getting Started

Managing Device Information

Managing Power over Ethernet Devices

Managing Stacking

Configuring Device Security

Configuring Ports

Aggregating Ports

Configuring Vlans

Defining WLAN

Configuring IP Information

Defining the Forwarding Database and Static Routes

Configuring Spanning Tree

Configuring Multicast Forwarding

Configuring SNMP

Configuring Quality of Service

Managing System Files

Managing System Logs

Managing Device Diagnostics

Configuring System Time

Viewing Statistics

Appendix A, WLAN Country Settings

Appendix B, Device Specifications & Features

Appendix B, Troubleshooting

Quick Links

Troubleshooting

Related Manuals for D-Link xStack DXS-3227

Summary of Contents for D-Link xStack DXS-3227