Show Dhcp Binding - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To clear dynamic binding entries in the pool named "engineering":
DGS-3420-28SC:admin#clear dhcp binding engineering 10.20.3.4
Command: clear dhcp binding engineering 10.20.3.4
Success.
DGS-3420-28SC:admin#

22-28 show dhcp binding

Description
This command is used to display dynamic binding entries.
Format
show dhcp binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify a DHCP pool name.
Restrictions
None.
Example
To display dynamic binding entries for "engineering":
DGS-3420-28SC:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name IP Addresss
------------ -------------- ------------------ --------
engineering 192.168.0.1
engineering 192.168.0.2
engineering 192.168.0.3
engineering 192.168.0.4
Total Entries: 4
DGS-3420-28SC:admin#
Hardware Address
00-80-C8-08-13-88
00-80-C8-08-13-99
00-80-C8-08-13-A0
00-80-C8-08-13-B0
321
Type Status
-------
Ethernet Manual
Ethernet Automatic 86400
Ethernet Automatic 86400
Ethernet Automatic 86400
Lifetime
---------
86400