Ip Http Server - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
7 PASSWORD
Default
By default, no password is set. It is an empty string.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
The exact password for a specific level needs to be used to enter the privilege level. Each level has only
one password to enter the level.
Example
This example shows how to create an enable password at the privilege level 15 of "MyEnablePassword".
Switch# configure terminal
Switch(config) #enable password MyEnablePassword
Switch# disable
Switch# enable
Password:****************
Switch# show privilege
Current privilege level is 15
Switch#

5-5 ip http server

This command is used to enable the HTTP server. Use the no command to disable the HTTP server
function.
ip http server
no ip http server
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
switch. The password can contain embedded spaces. The password is
case-sensitive. This is the default option. The plain-text password
maximum length is 32. (The range is 1-32)
Specifies the password in the encrypted form based on SHA-I. For the
encrypted form password, the length is fixed to 35 bytes long. The
password is case-sensitive. The syntax is Encrypted Password.
75